Synchrotron-based x-ray absorption spectroscopy for energy materials

Xiaosong Liu,Tsu-Chien Weng

DOI: https://doi.org/10.1557/mrs.2016.113

IF: 5

2016-06-01

MRS Bulletin

Abstract:Abstract

materials science, multidisciplinary,physics, applied

What problem does this paper attempt to address?

Spectral emittance measurements of micro/nanostructures in energy conversion: a review

Shiquan Shan,Chuyang Chen,Peter G. Loutzenhiser,Devesh Ranjan,Zhijun Zhou,Zhuomin M. Zhang

DOI: https://doi.org/10.1007/s11708-020-0693-0

2020-01-01

Frontiers in Energy

Abstract:Micro/nanostructures play a key role in tuning the radiative properties of materials and have been applied to high-temperature energy conversion systems for improved performance. Among the various radiative properties, spectral emittance is of integral importance for the design and analysis of materials that function as radiative absorbers or emitters. This paper presents an overview of the spectral emittance measurement techniques using both the direct and indirect methods. Besides, several micro/nanostructures are also introduced, and a special emphasis is placed on the emissometers developed for characterizing engineered micro/nanostructures in high-temperature applications (e.g., solar energy conversion and thermophotovoltaic devices). In addition, both experimental facilities and measured results for different materials are summarized. Furthermore, future prospects in developing instrumentation and micro/nanostructured surfaces for practical applications are also outlined. This paper provides a comprehensive source of information for the application of micro/nanostructures in high-temperature energy conversion engineering.
Simultaneous fast XAS/SAXS measurements in an energy-dispersive mode

Tetsuroh Shirasawa,Wolfgang Voegeli,Etsuo Arakawa

DOI: https://doi.org/10.1039/d4cp01399a

IF: 3.3

2024-06-26

Physical Chemistry Chemical Physics

Abstract:X-ray absorption spectroscopy (XAS) and small-angle X-ray scattering (SAXS) are common materials characterization tools at synchrotron radiation facilities used in many research fields. Since XAS can provide element-specific chemical states and local atomic structures and SAXS can provide nano-scale structural information, their complementary use is advantageous for a comprehensive understanding of multiscale phenomena. This paper presents a new method for simultaneous XAS/SAXS measurements with synchrotron radiation. The method employs a polychromatic X-ray beam as in the energy-dispersive XAS technique and captures both the transmission XAS spectrum and the SAXS intensity distribution with an area X-ray detector, which eliminates the energy scan in the conventional methods and realizes the simultaneous data acquisition in a shorter time. We succeeded in obtaining the atomic and nano-scale structures of Pt and Pt/Pd nanoparticles with a data acquisition time of 0.1 s, suggesting the potential for real-time observation of multiscale phenomena.

chemistry, physical,physics, atomic, molecular & chemical
Synchrotron Radiation XAFS Applications in the in Situ Measurement for Energy Catalysis

Liuxin Xu,Wanlin Zhou,Chenyu Yang,Hui Su,Qinghua Liu,Zhihu Sun,Shiqiang Wei

DOI: https://doi.org/10.1360/ssc-2023-0153

2023-01-01

Scientia Sinica Chimica

Abstract:This review presents a brief introduction of the basic principles,data analysis and experimental methods of synchrotron radiation-based X-ray absorption fine structure(XAFS)spectroscopy,as well as its applications in the in situ chemical measurements for energy catalysis researches.By selecting typical research papers in this field published in recent years,the experimental setups of in situ XAFS measurements are outlined for both gas-solid phase and liquid-solid phase chemical reactions.The focus is put on reviewing the applications of XAFS to study the structural dynamic evolution process of energy catalytic materials and reaction mechanism.These studies demonstrate the powerful characterization ability of the XAFS technique for in situ measurement of the active structure evolutions under real chemical reaction conditions,and point out further opportunities and challenges of XAFS for in situ measurements of other related chemical processes.
Energy-Dispersive X-ray Absorption Spectroscopy with an Inverse Compton Source

Juanjuan Huang,Benedikt Günther,Klaus Achterhold,Yi-tao Cui,Bernhard Gleich,Martin Dierolf,Franz Pfeiffer

DOI: https://doi.org/10.1038/s41598-020-65225-4

IF: 4.6

2020-05-29

Scientific Reports

Abstract:Abstract Novel compact x-ray sources based on inverse Compton scattering can generate brilliant hard x-rays in a laboratory setting. Their collimated intense beams with tunable well-defined x-ray energies make them well suited for x-ray spectroscopy techniques, which are typically carried out at large facilities. Here, we demonstrate a first x-ray absorption spectroscopy proof-of-principle experiment using an inverse Compton x-ray source with a flux of >10 10 photons/s in <5% bandwidth. We measured x-ray absorption near edge structure and extended x-ray absorption fine structure at the silver K-edge (~25.5 keV) for a series of silver samples. We propose an energy-dispersive geometry specifically adapted to the x-ray beam properties of inverse Compton x-ray sources together with a fast concentration correction method that corrects sample inhomogeneities very effectively. The combination of our setup with the inverse Compton source generates x-ray absorption spectra with high energy resolution in exposure times down to one minute. Our results unravel the great benefit of inverse Compton scattering sources for x-ray absorption techniques in a laboratory environment, especially in the hard x-ray regime, which allows to probe absorption edges of high Z materials.

multidisciplinary sciences
Synchrotron Radiation-Based Multispectroscopy Characterizations for Electrocatalytic Materials

Yunxiang Lin,Ying Wang,Hengjie Liu,Li Song

DOI: https://doi.org/10.1360/ssc-2023-0126

2023-01-01

Scientia Sinica Chimica

Abstract:Energy conversion and storage devices based on electrocatalytic processes are key to achieving green and sustainable development.The precise detection and analysis of catalyst local structures and reaction processes are crucial issues,and accurately achieving structural detection poses certain challenges.Characterization methods based on synchrotron radiation in large-scale scientific facilities provide a good research platform for comprehensive analysis of catalyst structures and reaction processes,promoting researchers'comprehensive understanding of catalytic mechanisms.Therefore,in this review,based on the research results of our team,we summarize and discuss the research progress and scientific opportunities of synchrotron radiation-based measurements of electrocatalytic materials for common scientific issues in electrocatalytic material research.We focus on the basic principles of synchrotron radiation characterization methods,synchrotron radiation technology for electrocatalyst structures and reaction processes,and summarize the measurement methods for comprehensively revealing local structures,intermediate species,and catalytic performance.Finally,we point out the challenges and scientific opportunities faced by synchrotron-based measurements of electrocatalytic materials,hoping to provide ideas for relevant characterization methods and material design.
High-energy synchrotron x-ray techniques for studying irradiated materials

Xuan Zhang,P. Kenesei,H. Sharma,Jun-Sang Park,J. Almer,D. Hoelzer,Meimei Li

DOI: https://doi.org/10.1557/JMR.2015.50

2015-05-01

Abstract:High performance materials that can withstand radiation, heat, multiaxial stresses, and corrosive environment are necessary for the deployment of advanced nuclear energy systems. Nondestructive in situ experimental techniques utilizing high energy x-rays from synchrotron sources can be an attractive set of tools for engineers and scientists to investigate the structure–processing–property relationship systematically at smaller length scales and help build better material models. In this study, two unique and interconnected experimental techniques, namely, simultaneous small-angle/wide-angle x-ray scattering (SAXS/WAXS) and far-field high-energy diffraction microscopy (FF-HEDM) are presented. The changes in material state as Fe-based alloys are heated to high temperatures or subject to irradiation are examined using these techniques.

Engineering,Physics,Materials Science
Development of Electron Energy-Loss Spectroscopy for Nanoscience.

Jun Yuan,Zhiwei Wang,Xin Fu,Lin Xie,Yuekui Sun,Shangpeng Gao,Jun Jiang,Xuerang Hu,Chen Xu

DOI: https://doi.org/10.1016/j.micron.2007.10.010

IF: 2.381

2007-01-01

Micron

Abstract:Electron energy-loss spectroscopy (EELS) has been well established in providing the composition and chemical bonding information of materials, particularly for light elements. Its potential for structural determination has long been known but has yet to be fully explored. With the convergence of rapid development in computing power and improvement in the efficiency of the material specific electronic structure simulation, plus the recent breakthrough in the development of C(s)-corrected electron microscopy, the reconstruction of the local three dimensional structure of nanomaterial using EELS in conjunction with advanced structural imaging and diffraction techniques is becoming increasingly feasible. In this paper, we will review from our own examples the progress in EELS instrumentation, methods and simulation to illustrate the progress that has been made. They include the density-function-theory-based ab initio spectroscopic simulation for standard-less fingerprint applications for metastable polymorph identification, magic angle electron energy-loss spectroscopy as well as recent results from the dual-detectors EELS system which allows the energy instability of the spectrometer to be analyzed in real-time and eventually compensated on-line.
Single-energy x-ray absorption detection: a combined electronic and structural local probe for phase transitions in condensed matter

A Filipponi,M Borowski,P W Loeffen,S De Panfilis,A Di Cicco,F Sperandini,M Minicucci,M Giorgetti

DOI: https://doi.org/10.1088/0953-8984/10/1/026

1998-01-12

Abstract:We describe the general principle and prototypical applications of a largely unexploited x-ray absorption technique based on single-energy detection during temperature scans. The present developments take advantage of the highly automated experimental set-ups and unique x-ray radiation characteristics available at third-generation synchrotron radiation sources. The sensitivity of the x-ray absorption cross-section to the local structural order makes it possible to investigate the occurrence of phase transitions. We show that by tuning the photon energy to a spectral feature that is highly sensitive to the sample phase it is possible to follow the occurrence and the characteristics of the phase transition. The sensitivity to the atomic fraction of the sample in a certain phase can be in the range. The energy tunability can be used to enhance the sensitivity to structural or electronic transformations. Several applications to prototypical cases are discussed in detail, including examples of solid-solid phase transitions, melting and undercooling, melting of binary alloys, impurity melting, and non-bulk phenomena.
Methods for energy dispersive x-ray spectroscopy with photon-counting and deconvolution techniques

Alessandro Forte,Thomas Gawne,Oliver S. Humphries,Thomas Campbell,Yuanfeng Shi,Sam M. Vinko

2024-11-26

Abstract:Spectroscopic techniques are essential for studying material properties, but the small cross-sections of some methods may result in low signal-to-noise ratios (SNRs) in the collected spectra. In this article we present methods, based on combining Bragg spectroscopy with photon counting and deconvolution algorithms, which increase the SNRs, making the spectra better suited to further analysis. We aim to provide a comprehensive guide for constructing spectra from camera images. The efficacy of these methods is validated on synthetic and experimental data, the latter coming from the field of high-energy density (HED) science, where x-ray spectroscopy is essential for the understanding of materials under extreme thermodynamic conditions.

Applied Physics,Instrumentation and Detectors
Study on data processing for x-ray spectrometer based on microcalorimeter

Jingkai Xia,Shuo Zhang,Bingjun Wu,Zhi Liu

DOI: https://doi.org/10.1117/12.2625121

2022-03-27

Abstract:X-ray spectroscopy is an important method in exploring the material composition and elemental properties. Traditional spectrometers in X-ray spectroscopy include wavelength-dispersive type and semiconductors-based energy-dispersive type. The former possesses high energy resolution but low collecting efficiency and narrow spectral band coverage, while the latter is more efficient and wider in spectral range but give relatively low energy resolution. Spectrometers based on microcalorimeters serve as a new class of energy-dispersive type spectrometers which balance the performance in energy resolution, detection efficiency, and spectral coverage, making them promising in many spectroscopy applications. The superconducting transition-edge sensor (TES) is a representative class of maturely developed microcalorimeters success in array fabrication and readout. We are developing TESs-based X-ray spectrometer at ShanghaiTech University aiming at the application in advanced X-ray light source, like synchrotron radiation or free electron laser facilities. Recently, a prototype has been set up and started running in the lab. This paper introduces a systematic work on data processing with this prototype, focusing on both data acquisition and analysis. With optimization on both hardware and analysis, we have achieved resolution better than 7 eV in the range from 2 keV to 9 keV on the prototype.
Element-specific electronic and structural dynamics using transient X-ray spectroscopy

Hanzhe Liu,Isabel M. Klein,Jonathan M. Michelsen,Scott K. Cushing

DOI: https://doi.org/10.48550/arXiv.2106.04793

2021-06-09

Abstract:Transient X-ray absorption techniques can measure ultrafast dynamics of the elemental edges in a material or multiple layer junction, giving them immense potential for deconvoluting concurrent processes. However, the interpretation of the photoexcited changes to an X-ray edge is not as simple as directly probing a transition with optical or infrared wavelengths. The core hole left by the core-level transition distorts the measured absorption and reflection spectra, both hiding and revealing different aspects of a photo-induced process. In this perspective, we describe the implementation and interpretation of transient X-ray experiments. This description includes a guide of how to choose the best wavelength and corresponding X-ray sources when designing an experiment. As an example, we focus on the rising use of extreme ultraviolet (XUV) spectroscopy for understanding performance limiting behaviors in solar energy materials, such as measurements of polaron formation, electron and hole kinetics, and charge transport in each layer of a metal-oxide-semiconductor junction. The ability of measuring photoexcited carriers in each layer of a multilayer junction could prove particularly impactful in the study of molecules, materials, and their combinations that lead to functional devices in photochemistry and photoelectrochemistry.

Materials Science
Synchrotron-radiation Spectroscopic Identification Towards Diverse Local Environments of Single-Atom Catalysts

Sicong Qiao,Qun He,Pengjun Zhang,Yuzhu Zhou,Shuangming Chen,Li Song,Shiqiang Wei

DOI: https://doi.org/10.1039/d1ta08254j

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:The unique structures of single-atom catalysts (SACs) endow them with widespread energy applications. This review summarized the achievements of multifarious synchrotron-radiation characterization methods in studying the local environments of SACs.
Simultaneous two-color X-ray absorption spectroscopy using Laue crystals at an inverse-compton scattering X-ray facility

Juanjuan Huang,Benedikt Günther,Klaus Achterhold,Martin Dierolf,Franz Pfeiffer

DOI: https://doi.org/10.1107/S1600577521009437

IF: 2.557

2021-11-04

Journal of Synchrotron Radiation

Abstract:X-ray absorption spectroscopy (XAS) is an element-selective technique that provides electronic and structural information of materials and reveals the essential mechanisms of the reactions involved. However, the technique is typically conducted at synchrotrons and usually only probes one element at a time. In this paper, a simultaneous two-color XAS setup at a laboratory-scale synchrotron facility is proposed based on inverse Compton scattering (ICS) at the Munich Compact Light Source (MuCLS), which is based on inverse Compton scattering (ICS). The setup utilizes two silicon crystals in a Laue geometry. A proof-of-principle experiment is presented where both silver (Ag) and palladium (Pd) K-edge X-ray absorption near-edge structure spectra were simultaneously measured. The simplicity of the setup facilitates its migration to other ICS facilities or maybe to other X-ray sources (e.g. a bending-magnet beamline). Such a setup has the potential to study reaction mechanisms and synergistic effects of chemical systems containing multiple elements of interest, such as a bimetallic catalyst system.

optics,physics, applied,instruments & instrumentation
High-Throughput X-Ray Characterization System For Combinatorial Materials Studies

Zl Luo,B Geng,J Bao,Ch Liu,Wh Liu,C Gao,Zg Liu,Xl Ding

DOI: https://doi.org/10.1063/1.2038147

IF: 1.6

2005-01-01

Review of Scientific Instruments

Abstract:We have developed a high-throughput x-ray characterization system, which can rapidly screen structure, composition and x-ray scintillation of combinatorial materials libraries using energy-dispersive x-ray diffraction, x-ray fluorescence, and x-ray photoluminescence. This system consists of an x-ray source, a polycapillary x-ray lens, one or two x-ray energy detectors, and a fiber optic spectrometer. A Windows-based software package was also developed to control the measurement system and data acquisition automatically. Examples are also demonstrated to show the applicability of this system. (c) 2005 American Institute of Physics.
Measuring Chemical Shifts with Energy-Dispersive X-ray Spectroscopy

Yueyun Chen,Rebekah Jin,Yarin Heffes,Brian Zutter,Tristan P. O'Neill,Jared J. Lodico,B. C. Regan,Matthew Mecklenburg

2024-09-24

Abstract:Electron microscopy prevalently uses energy-dispersive x-ray spectroscopy (EDS) and electron energy loss spectroscopy (EELS) for elemental analysis. EDS and EELS energy resolutions are commonly between 30-100 eV or 0.01-1 eV, respectively. Large solid angle EDS detector technology has increased collection efficiency to enable precision spectroscopy via averaging of 0.02-0.1 eV. This improved precision gives access to chemical shifts; examples are shown in compounds of Al, Ti, and W. EDS can now detect chemical information in a complementary parameter space (accelerating voltage, thickness, atomic number) to that covered by EELS.

Materials Science
Robust retrieval of material chemical states in X-ray microspectroscopy

Ting Wang,Xiaotong Wu,Jizhou Li,Chao Wang

2023-08-08

Abstract:X-ray microspectroscopic techniques are essential for studying morphological and chemical changes in materials, providing high-resolution structural and spectroscopic information. However, its practical data analysis for reliably retrieving the chemical states remains a major obstacle to accelerating the fundamental understanding of materials in many research fields. In this work, we propose a novel data formulation model for X-ray microspectroscopy and develop a dedicated unmixing framework to solve this problem, which is robust to noise and spectral variability. Moreover, this framework is not limited to the analysis of two-state material chemistry, making it an effective alternative to conventional and widely-used methods. In addition, an alternative directional multiplier method with provable convergence is applied to obtain the solution efficiently. Our framework can accurately identify and characterize chemical states in complex and heterogeneous samples, even under challenging conditions such as low signal-to-noise ratios and overlapping spectral features. Extensive experimental results on simulated and real datasets demonstrate its effectiveness and reliability.

Computer Vision and Pattern Recognition
Solid-State Photoelectron Spectroscopy with Synchrotron Radiation

John H. Weaver,Giorgio Margaritondo

DOI: https://doi.org/10.1126/science.206.4415.151

IF: 56.9

1979-10-12

Science

Abstract:Synchrotron radiation sources, providing intense, tunable, polarized, and stable beams of ultraviolet and x-ray photons, are having a great impact on biology, physics, chemistry, materials science, and other areas of research. Synchrotron radiation has revolutionized solid-state photoelectron spectroscopy by enhancing its capabilities for investigating the electronic behavior of solids and solid surfaces. Several fundamental photoemission techniques that rely on synchrotron radiation are discussed in this article. These techniques have an adjustable tunable surface sensitivity and provide the first direct mapping of the electronic band structure. Recent applications of photoelectron spectroscopy for studies of chemisorption geometries and surface structures are discussed.

multidisciplinary sciences
Between Photocatalysis and Photosynthesis: Synchrotron Spectroscopy Methods on Molecules and Materials for Solar Hydrogen Generation

Debajeet K. Bora,Yelin Hu,Sebastian Thiess,Selma Erat,Xuefei Feng,Sumanta Mukherjee,Giuseppino Fortunato,Nicolas Gaillard,Rita Toth,Krisztina Gajda-Schrantz,Wolfgang Drube,Michael Graetzel,Jinghua Guo,Junfa Zhu,Edwin C. Constable,D. D. Sarma,Hongxin Wang,Artur Braun

DOI: https://doi.org/10.1016/j.elspec.2012.11.009

IF: 1.993

2013-01-01

Journal of Electron Spectroscopy and Related Phenomena

Abstract:Energy research is to a large extent materials research, encompassing the physics and chemistry of materials, including their synthesis, processing toward components and design toward architectures, allowing for their functionality as energy devices, extending toward their operation parameters and environment, including also their degradation, limited life, ultimate failure and potential recycling. In all these stages, X-ray and electron spectroscopy are helpful methods for analysis, characterization and diagnostics for the engineer and for the researcher working in basic science.This paper gives a short overview of experiments with X-ray and electron spectroscopy for solar energy and water splitting materials and addresses also the issue of solar fuel, a relatively new topic in energy research. The featured systems are iron oxide and tungsten oxide as photoanodes, and hydrogenases as molecular systems. We present surface and subsurface studies with ambient pressure XPS and hard X-ray XPS, resonant photoemission, light induced effects in resonant photoemission experiments and a photo-electrochemical in situ/operando NEXAFS experiment in a liquid cell, and nuclear resonant vibrational spectroscopy (NRVS). (C) 2012 Elsevier B.V. All rights reserved.

Synchrotron-based x-ray absorption spectroscopy for energy materials

Spectral emittance measurements of micro/nanostructures in energy conversion: a review

Simultaneous fast XAS/SAXS measurements in an energy-dispersive mode

Synchrotron Radiation XAFS Applications in the in Situ Measurement for Energy Catalysis

Energy-Dispersive X-ray Absorption Spectroscopy with an Inverse Compton Source

Synchrotron Radiation-Based Multispectroscopy Characterizations for Electrocatalytic Materials

High-energy synchrotron x-ray techniques for studying irradiated materials

Development of Electron Energy-Loss Spectroscopy for Nanoscience.

Single-energy x-ray absorption detection: a combined electronic and structural local probe for phase transitions in condensed matter

Methods for energy dispersive x-ray spectroscopy with photon-counting and deconvolution techniques

Study on data processing for x-ray spectrometer based on microcalorimeter

Element-specific electronic and structural dynamics using transient X-ray spectroscopy

Synchrotron-radiation Spectroscopic Identification Towards Diverse Local Environments of Single-Atom Catalysts

Simultaneous two-color X-ray absorption spectroscopy using Laue crystals at an inverse-compton scattering X-ray facility

High-Throughput X-Ray Characterization System For Combinatorial Materials Studies

Measuring Chemical Shifts with Energy-Dispersive X-ray Spectroscopy

Robust retrieval of material chemical states in X-ray microspectroscopy

Solid-State Photoelectron Spectroscopy with Synchrotron Radiation

Between Photocatalysis and Photosynthesis: Synchrotron Spectroscopy Methods on Molecules and Materials for Solar Hydrogen Generation