Abstract:CaCu3Ti4O12 ceramic (CCTO) were prepared by traditional solid phase sintering methods at 1100 degrees C for 20h. In order to learn the influence of atmosphere on point defects and dielectric properties, the samples sintered were heat treated in oxygen-rich or nitrogen-rich atmosphere at 900 degrees C for 9h. The phase structure and dielectric properties are measured by X-ray diffraction (XRD) and Novocontrol wide band dielectric spectroscopy. It is found that grain resistance and especially grain-boundary resistance increase after oxygen-rich atmosphere treatment. The increase of grain-boundary resistance directly results in the drop of low frequency loss. The increase of grain resistance significantly restrains high frequency giant dielectric constant and dielectric loss. However, the effect of nitrogen-rich atmosphere treatment is quite contrary. It is believed that heat treatment in oxygen-rich or nitrogen-rich atmosphere changes the concentration of oxygen vacancy in CCTO. Different oxygen vacancy concentrations cause huge change of electric performance of grain and grain-boundary, which in turn influences dielectric properties of CCTO ceramics. In addition, the origin of medium and high frequency relaxation peak was done by testing dielectric temperature spectrum of CCTO ceramic, finding that CCTO high frequency relaxation process stems from relaxation polarization caused by monovalent oxygen vacancy, and medium frequency relaxation process stems from relaxation polarization caused by bivalent oxygen vacancy. And the activation energies of the two relaxation processes do not change at all with atmosphere treatment, implying the intrinsic nature of the two intrinsic defects.

Dielectric properties and relaxation behavior of Sm substituted SrTiO3 ceramics sintered in nitrogen atmosphere

Low Temperature Dielectric Relaxation in Complex Perovskite Bati0.8(Ni0.5nb0.5)(0.2)O-3 Ceramics

Colossal permittivity and ultralow dielectric loss in SrTi1-Nb O3 ceramics sintered at different atmospheres via defect chemistry improvement

Mechanism of the Giant Permittivity in Sm Modified SrTiO 3 Sintered at Different Atmospheres

Contribution of oxygen vacancies to the giant dielectric response in Sm 1.5 Sr 0.5 NiO 4− δ ceramics

High Dielectric Permittivity and Ultralow Dielectric Loss in Nb-doped SrTiO3 Ceramics

High dielectric permittivity and ultralow dielectric loss in Nb-doped SrTiO 3 ceramics

Colossal Permittivity and Ultralow Dielectric Loss in Nb-doped SrTiO 3 Ceramics

Colossal Dielectric Permittivity in (al+nb) Co-Doped Ba0.4Sr0.6TiO3 Ceramics

Effects of structural defects on dielectric properties of Nb-doped SrTiO3-based ceramics

Simultaneously Achieving Colossal Permittivity, Ultralow Dielectric Loss Tangent, and High Insulation Resistivity in Er-Doped SrTiO 3 Ceramics via Oxygen Vacancy Regulation

Ultralow Dielectric Loss in Y‐doped SrTiO3 Colossal Permittivity Ceramics Via Designing Defect Chemistry

Ultralow dielectric loss in Y‐doped SrTiO 3 colossal permittivity ceramics via designing defect chemistry

Structure and electrical properties of Ti-doped Sm_(0.9)Sr_(0.1)AlO_(3-δ) ceramics

Colossal permittivity and low dielectric loss in (Li, Nb) co-doped SrTiO3 ceramics with high frequency and temperature stability

Dielectric Relaxation and Polaronic Hopping in Al-substituted Sm1.5Sr0.5NiO4 Ceramics

Synthesis and characterization of (sm, Al) co-doped SrTiO3 with giant dielectric constant and low dielectric loss through defect engineering design

Dielectric relaxation and polaronic hopping in Al-substituted Sm 1.5Sr0.5NiO4 ceramics

Study on the Origin of Giant Dielectric Constant of CaCu3Ti4O12 Ceramics

High Insulation Resistivity and Ultralow Dielectric Loss in La-Doped SrTiO3 Colossal Permittivity Ceramics through Defect Chemistry Optimization

Colossal Dielectric Constant And Relaxation Behaviors In Pr:Srtio(3) Ceramics