Abstract:Braiding is an attractive manufacturing method for tubular elements such as hollow shafts and struts. One of the main challenges however is the integration of suitably performing end-fittings. Recent advances in additive layer manufacture have enabled the fabrication of end-fittings which can be ‘co-impregnated’ or ‘co-cured’ with the fibre preform in a single step, i.e. without the need for secondary adhesive bonding. This requires the introduction of protrusions onto the surface of the end-fitting to promote mechanical interlocking with the fibres. However, the lack of accurate modelling tools for the simulation of this manufacturing process means that much empiricism is currently used in the design of such structures. A novel numerical framework is presented here for the full-scale simulation of the braiding process over structured end-fittings. Nonlinear finite element analysis is applied at the meso-scale, with strands of beam elements representing individual yarns and meshed surfaces modelling the mandrel and tooling. Penalty-based contact formulations are then used to simulate all inter-yarn and yarn-metal interactions, enabling detailed predictions of fibre paths around surface protrusions. In order to verify and validate this numerical framework, a series of full-scale braiding experiments was conducted using additively-manufactured thermoplastic mandrels. Final braid patterns as well as the occurrence of braid imperfections were investigated and compared to model predictions. It is shown that the proposed modelling strategy reproduces well the trends observed experimentally in terms of final braid quality. A parametric study was then conducted on the effects of initial end-fitting alignment with respect to oncoming yarns, suggesting that better control over this parameter could reduce considerably the occurrence of braid imperfections.

Modeling of braiding parameter impact on pore size and porosity in a tubular braiding fabric

Multi-scale modeling and elastic properties prediction of 3D four-directional tubular braided composites

Shear deformation characteristics under tensile stress during forming of tubular braided fabrics

Thermal stress distribution of multi-layered composite tubes affected by braiding angle

Spatial distribution of yarns and mechanical properties in 3D braided tubular composites

Topology-based parametric modeling of three-dimensional hexagonal braids for advanced composite structures

Experimental and numerical studies on the braiding of carbon fibres over structured end-fittings for the design and manufacture of high performance hybrid shafts

Mechanical modeling of an auxetic tubular braided structure: Experimental and numerical analyses

Theoretical analysis of braiding strand trajectories and simulation of three-dimensional parametric geometrical models for multilayer interlock three-dimensional tubular braided preforms

Non-Axisymmetric Overbraiding Process Modeling Based on Enhanced Kinematic Models

Design Method for Braiding Process and Structure Parameters of Three Dimensional Two-Step Tubular Braided Preform

Process Modelling of 3D Hexagonal Braids

Effects of modeling strategies of triply periodic minimal surface on the mechanical properties and permeability of biomedical TC4 porous scaffolds

Development of a generalized analytical model for tubular braided-architecture composites

Fabrication of Three-Dimensional Poly(ε-Caprolactone) Scaffolds with Hierarchical Pore Structures for Tissue Engineering

Theoretical Modeling on the Deformation Behavior of Auxetic Tubular Braid Made from Modified Circular Braiding Technique

Design and analysis of the mechanical properties of controllable porous scaffolds for bone tissue engineering

Fabrication of a Bi-layer Tubular Scaffold Consisted of a Dense Nanofibrous Inner Layer and a Porous Nanoyarn Outer Layer for Vascular Tissue Engineering

A Tensile Constitutive Relationship and a Finite Element Model of Electrospun Nanofibrous Mats.

Parametric analyses on multiscale elastic behavior of 3D braided composites with pore defects