Abstract:Ion exchange membranes were fabricated using a phase inversion technique based on polyvinyl chloride nanocomposites. Subsequently, electrodialysis membranes were modified by the addition of [SiO 2 -co-Ag] nanoparticles using magnetron sputtering. The impact of varying concentrations of [SiO 2 -co-Ag] nanoparticles on the performance of mixed-matrix poly (vinyl chloride)-based nanoparticle cation exchange membranes was studied. Various techniques, including scanning electron microscopy (SEM), atomic force microscopy (AFM), and scanning optical microscopy (SOM) confirmed the presence of nanoparticles in the structure of membranes. The SEM images showed that the addition of SiO 2 -co-Ag nanoparticles resulted in a more compact structure for the modified membranes. The SOM images show that the fabricated membranes had a uniform surface and uniform distribution of SiO 2 -Ag in the membrane matrix. The AFM images revealed that the modified membranes had a rough surface at high additive concentrations (4.0% wt.) and cross-sectional SEM images confirmed that the addition of nanoparticles created cracks and cavities in the membrane structure. The hydrophilicity of silica and silver nanoparticles increased the surface hydrophilicity of the modified membranes. The membrane potential, permselectivity, and transport number showed fluctuations, decreasing initially with the use of SiO 2 -co-Ag nanoparticles up to a concentration of 1.0% wt and then increasing with an increase in the concentration of nanoparticles to 2.0% wt before declining again for a concentration of 4.0% wt. The flux and ionic permeability were promoted by the addition of SiO 2 -co-Ag up to 1.0% wt, but after that, they showed a decreasing trend with an increase in the concentration of nanoparticles. The areal electrical resistance of the prepared membrane dramatically declined with an increase in the concentration of SiO 2 -Ag. Importantly, the application of these membranes was in electrodialysis, and the use of also enhanced the mechanical resistance of the membranes. Furthermore, the fabricated membranes exhibited a good ability to remove E. coli from water. Notably, the modified membrane with a 1.0% wt concentration of SiO 2 -co-Ag nanoparticles demonstrated greater performance in removing E. coli.

Silver-Doped Organic-Inorganic Hybrid Silica Membranes by Sol-Gel Method: Preparation and Hydrothermal Stability

Sol-gel Preparation of Ag-silica Nanocomposite with High Electrical Conductivity

Organic–inorganic crosslinked and hybrid membranes derived from sulfonated poly(arylene ether sulfone)/silica via sol–gel process

Gas Separation Silica Membranes Prepared by Chemical Vapor Deposition of Methyl-Substituted Silanes

Synthesis of Silica Membranes by Chemical Vapor Deposition Using a Dimethyldimethoxysilane Precursor

Microstructure and Hydrothermal Stability of Microporous Niobia-Silica Membranes: Effect of Niobium Doping Contents

Membrane surfaces immobilized with ionic or reduced silver and their anti-biofouling performances

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Supported mesoporous SiO2 membrane synthesized by sol–gel-template technology

The Synthesis, Characterization and Application of Ag–SiO2–Al2O3 Sol–gel Composites

Novel Anion-Exchange Organic–inorganic Hybrid Membranes Prepared Through Sol–gel Reaction of Multi-Alkoxy Precursors

Synthesis and Characterizations of New Negatively Charged Organic–inorganic Hybrid Materials

The synthesis , characterization and application of Ag – SiO – Al O sol – gel composites 2 2 3

Improvement the physicochemical properties of cation exchange membranes by incorporation SiO2-co-Ag nanoparticles

Development of sulfonated (3-Mercaptopropyl)trimethoxysilane membranes with thermal stability and excellent NH 3 perm-selectivity at 300 °C

Novel anion-exchange organic-inorganic hybrid membranes prepared through sol-gel reaction and UV/thermal curing

Synthesis and characterization of mesoporous silica membranes via dip-coating and hydrothermal deposition techniques

Fundamental Studies of a New Hybrid (inorganic–organic) Positively Charged Membrane. II. Membrane Preparation Via Alcoholysis Reaction and Amination Processes of Silicone and Titanate Coupling Agents

Dimethoxydimethylsilane-derived Silica Membranes Prepared by Chemical Vapor Deposition at 973 K Exhibiting Improved Thermal/hydrothermal Stability

Advancing SilverSil sol-gel chemistry towards practical application

New Anion Exchanger Organic-Inorganic Hybrid Materials And Membranes From A Copolymer Of Glycidylmethacrylate And Gamma-Methacryloxypropyl Trimethoxy Silane