Abstract:Ionic liquids, like bis(fluorosulfonyl)imide (FSI) ionic liquids, are promising solvents for lithium ion batteries due to their high thermal stability and wide electrochemical window. The performance of ionic liquid electrolytes is however hampered by the low conductivity at room temperature, but the high thermal stability allows for operation at elevated temperatures, at which the conductivity is significantly improved. Electrolytes based on LiFSI and ionic liquids of the cations; pyrrolidinium (PYR13 +), and phosphonium (P111i4 +), with FSI anions, have been shown to exhibit stable cycling at room temperature, and good rate performance for cells composed of silicon anodes and LiFePO4 cathodes at 60 °C [1,2]. The lithium ion mobilities, relative to standard carbonate electrolytes, were determined from the limiting current densities at room temperature and 60 °C. Significant differences in the temperature dependence of the transport properties were revealed, with a considerable increase in the lithium ion mobility from 20 to 60 °C for electrolytes based on P111i4FSI. The best rate performance at 60 °C was demonstrated for the P111i4FSI based electrolyte, with discharge capacities around 1000 mAh/gSi at a 2C rate [2]. The improved performance was attributed to a combination of the improved lithium ion mobility and formation of a more conductive solid electrolyte interphase (SEI) for this electrolyte. In view of the excellent high temperature performance of P111i4FSI, including high thermal stability and a large electrochemical window [1,2], this electrolyte has been selected for further studies as electrolyte for high voltage LiNi0.5-xMn1.5+xO4 (LNMO) cathodes. LiNi0.5-xMn1.5+xO4 (LNMO) is an attractive candidate as a next generation Li-ion battery (LIB) cathode material because it has a high energy density, due to the high operating voltage, and a relatively low cost (Co-free) compared to alternative cathode chemistries. However, the stability of LNMO is not yet satisfactory for commercial applications, especially in full-cell configuration with graphite as the anode material, and at elevated temperatures. One challenge is the transition metal (TM) dissolution, which poisons the graphite anode by degrading the solid electrolyte interface (SEI) [4]. The TM dissolution is affected by the formation of hydrofluoric (HF) acid in carbonate-based electrolytes utilizing the LiPF6 salt [3]. Additionally, the decomposition processes occur with an increased rate at elevated temperatures [4,5]. Another challenge is the side reactions occurring at the high operating voltage, which limits the coulombic efficiency. Previous works have indicated that the carbon conductive additive is more prone to side reactions than the LNMO active material [6]. Here, we present a study on the phosphonium-based ionic liquid P111i4FSI, with two different salt concentrations: 0.79 m LiFSI and 3.0 m LiFSI, as an alternative electrolyte for LIBs with an LNMO cathode.The focus of the research is to study the side reactions separately on the carbon conductive additive, and on the LNMO active material. Carbon conductive additives differing in structure and particle size are studied. The electrolyte is tested both in half-cell and full-cell configuration with a graphite anode, as well as at room temperature and elevated temperatures. Using 0.79 m LiFSI P111i4FSI results in similar capacity retention, but higher coulombic efficiencies after 200 cycles in half-cells at room temperature compared to 1 M LiPF6 in 1:1 EC:DEC (v/v). Post-mortem characterization is carried out with SEM, TEM, Raman spectroscopy, and FT-IR. References [1] D.T. Rogstad et al., J. Electrochem. Soc., 168 (2021) 110506 [2] Daniel Tevik Rogstad et al. 2022 Journal of the Electrochemical Society, 169, 110531 [3] Marc Wentker et al. 2019 Energies, 12, 504 [4] Nicholas P. W. Pieczonka et al. 2013 The Journal of Physical Chemistry C 117, 15947-15957 [5] U. Heider et al. 1999 Journal of Power Sources 81-82, 119-122, [6] Younesi et al., J. Electrochem. Soc., 162(7) (2015) A1289

Evaluation of Selected Ionic Liquids as Electrolytes for Silicon Anodes in Li-Ion Batteries

Improved electrochemical performance and solid electrolyte interphase properties of electrolytes based on lithium bis(fluorosulfonyl)imide for high content silicon anodes

Solid Electrolyte Interface Film-Forming and Surface-Stabilizing Bifunctional 1,2-Bis((trimethylsilyl)oxy) Benzene As Novel Electrolyte Additive for Silicon-Based Lithium-Ion Batteries.

Enabling the use of lithium bis(trifluoromethanesulfonyl)imide as electrolyte salt for Li‐ion batteries based on silicon anodes and Li(Ni0.4Co0.4Mn0.2)O2 cathodes by salt additives

Tuning the Formation and Structure of the Silicon Electrode/Ionic Liquid Electrolyte Interphase in Superconcentrated Ionic Liquids

Rational Design of an In-Build Quasi-Solid-state Electrolyte for High-Performance Lithium-Ion Batteries with the Silicon-Based Anode

Rational Electrolyte Design for Interfacial Chemistry Modulation to Enable Long‐Term Cycling Si Anode

Electrolytes Containing Triethyl Phosphate Solubilized Lithium Nitrate for Improved Silicon Anode Performance

The Electrochemical Performance of Silicon Nanoparticles in Concentrated Electrolyte

Effective SEI Formation via Phosphazene‐Based Electrolyte Additives for Stabilizing Silicon‐Based Lithium‐Ion Batteries

SEI Formation and Interfacial Stability of a Si Electrode in a LiTDI-Salt Based Electrolyte with FEC and VC Additives for Li-Ion Batteries

A Uniform Self‐Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable‐Cycling Anodes in Lithium‐Ion Batteries

Ionic Liquid-Based Electrolytes for Sodium-Ion Batteries: Tuning Properties To Enhance the Electrochemical Performance of Manganese-Based Layered Oxide Cathode

Phosphonium-Based Ionic Liquid Electrolyte in Combination with Silicon Anodes and LiNi0.5-XMn1.5+XO4 Cathodes for Lithium Ion Batteries

Electrolyte Design Enabling a High‐Safety and High‐Performance Si Anode with a Tailored Electrode–Electrolyte Interphase

Synthesis and Electrochemical Characterization of Novel Electrolyte Additives for High Performance in Lithium-Ion Batteries with Si-Based Anodes

Effects of Lithium Polysulfides on the Formation of Solid Electrolyte Interfaces in Silicon Anodes

Comparative study of different lithium salts as electrolyte additives of Li/SiOx–Si–C half-cells for lithium sulfur batteries

Influence of the structure of the anion in an ionic liquid electrolyte on the electrochemical performance of a silicon negative electrode for a lithium-ion battery

A Steric-Hindrance-Induced Weakly Solvating Electrolyte Boosting the Cycling Performance of a Micrometer-Sized Silicon Anode

Understanding the Roles of Electrolyte Additives on the Surface Modification Mechanism of Silicon-Based Anodes in Lithium-Ion Batteries