Abstract:The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe-soil interaction and thermal insulation. Due to the small-amplitude oscillations driven by the sea state as well as lay vessel motions, the as-laid embedment is significantly greater than the predictions derived from static penetration analyses. This paper presents a numerical study into the cyclic embedment behavior of deep-water pipelines in soft clay using a recently developed sequential limit analysis (SLA) technique. It directly models the evolution of model geometry and material properties through a consecutive series of small displacement analyses and incorporates the effect of strain softening and strain rate on soil strength. A rigid plane-strain pipe section is pushed-in-place and then subjected to small-amplitude cyclic lateral displacements, with an accumulated lateral pipe displacement of up to 60 diameters. Careful comparisons between the numerical results with published centrifuge data are provided to demonstrate the robustness of SLA, in terms of pipe invert trajectory and soil resistance, followed by an extensive parametric study investigating the effect of strain rate, strain softening, oscillation amplitude, and loading history. More detailed aspects of the cyclic loading behavior are discussed with reference to soil failure mechanisms and bearing capacity yield envelopes. A strong correlation between accumulated lateral pipe displacement and pipe embedment is identified, regardless of the varying oscillation amplitudes, and soil buoyancy is found to play the most significant role in determining the final pipe embedment. The present study aims to assist the development of a macro-element plasticity pipe-soil model that can be incorporated into simplified three-dimensional (3D) pipeline-seabed models, as well as to promote the application of SLA to model complex large-displacement pipe-soil interaction problems.

Deep cavity flow mechanism of pipe penetration in clay

Deep cavity flow mechanism of pipe penetration in clay

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Break-out Resistance of Offshore Pipelines Buried in Inclined Clayey Seabed

Investigation of the Process of Pipeline Penetration at a Shallow Embedment in Clay with Large-Deformation Analysis

Evaluation of Undrained Shear Strength of Surficial Marine Clays Using Ball Penetration-Based CFD Modelling

Study of Pipeline Penetration Based on CEL in Clay

Coupled analysis of full flow penetration problems in soft sensitive clays

Influence of Penetration Rate on Full-Flow Penetrometer Resistance in Underconsolidated Clay

Analytical Analysis of Pipeline–soil Interaction During J-lay on a Plastic Seabed with Bearing Resistance Proportional to Depth

Analysis of Penetration Depth of Pipeline on Cohesive Soil Seabed

Interpreting strength parameters of strain-softening clay from shallow to deep embedment using ball and T-bar penetrometers

Bearing Capacity Factors of T-bar from Surficial to Stable Penetration into Deep-Sea Sediments

Model Tests on the Adhesion Factor of Full-Scale Polyethylene-Coated Pipes in Soft and Very Soft Clays

Numerical Simulations of Dynamic Embedment During Pipe Laying on Soft Clay

Modelling the degradation of penetration resistance during cyclic T-bar tests in a Gulf of Mexico clay

Large-scale penetration model tests of bucket foundations of different structural types in clay

Numerical investigations into cycling of full-flow penetrometers in soft clay