Abstract:High-density embedded nonvolatile memory (eNVM) at advanced technology nodes is still in great demand for SOC chips used in consumer electronics, self-driving cars, industrial control, and IoT edge devices. Although embedded NOR Flash is still main stream, its process complexity and high integration cost make it difficult to scale beyond 28nm. RRAM has become a promising alternative owing to its excellent scalability, low power, and compatibility with logic processes [1 –6]. However, several challenges still exist that restrict RRAM from practical eNVM applications, as shown in Fig. 24.2.1. 1) a high supply voltage is needed, because of high operation voltages and a considerable voltage drop on write path. 2) The IR drop on write path varies significantly with the distance of a cell from the peripheral circuits. 3) Prior self-write termination (SWT), with its abrupt cutoff, fails to form dense conductive filaments (CFs). While delayed termination helps to alleviate this issue, its delay time is not optimized for fast and slow cells [3]. 4) Previous read reference schemes that use a small number of HRS/LRS cells may collapse when encountering tail bits, resulting in a poor reference [6]. In this work, we demonstrate a 1Mb 14nm-FinFET RRAM with a $0.022 \\mu m^{2}$ cell size. The cell array is in a deep N-well with adequate P-substrate biasing to alleviate the difficulty of high voltage transfer. Placing the bit line (BL) and source line (SL) drivers on the top and bottom of the array reduces the IR-drop variation for near and far cells. Self-adaptive delayed termination (SADT) adjusts the termination time according to cell characteristics (fast or slow), helping to generate robust CFs. A read reference with multiple dummy 1T1R cells avoids the reference collapse issue. The test chip supports reliable read operation at a minimum supply voltage of 0.5V from $-40^{\\circ}C$ to $125^{\\circ}C$.

A three-bit-per-cell via-type resistive random access memory gated metal-oxide semiconductor field-effect transistor non-volatile memory with the FORMing-free characteristic

Complementary Metal Oxide Semiconductor Compatible Hf-Based Resistive Random Access Memory with Ultralow Switching Current/Power

24.2 A 14nm-FinFET 1Mb Embedded 1T1R RRAM with a 0.022µm<sup>2</sup> Cell Size Using Self-Adaptive Delayed Termination and Multi-Cell Reference

2D Molybdenum Disulfide (mos2) Transistors Driving RRAMs with 1T1R Configuration

A 14nm-Finfet 1mb Embedded 1t1r Rram With A 0.022 Mu M(2) Cell Size Using Self-Adaptive Delayed Termination And Multi-Cell Reference

Nanoporous Silicon Oxide Memory

Forming-free flexible memristor with multilevel storage for neuromorphic computing by full PVD technique

Purely electronic nanometallic resistance switching random-access memory

Highly Compact 1T-1R Architecture (4f(2) Footprint) Involving Fully Cmos Compatible Vertical Gaa Nano-Pillar Transistors and Oxide-Based Rram Cells Exhibiting Excellent Nvm Properties and Ultra-Low Power Operation

Highly compact 1T-1R architecture (4F2footprint) involving fully CMOS compatible vertical GAA nano-pillar transistors and oxide-based RRAM cells exhibiting …

An Electronic Synapse Device Based on Solid Electrolyte Resistive Random Access Memory

Flexible 3D Memristor Array for Binary Storage and Multi‐states Neuromorphic Computing Applications

Memristor-based RRAM with Applications

Interface Engineering With Mos2-Pd Nanoparticles Hybrid Structure For A Low Voltage Resistive Switching Memory

IGZO/SnOx-based dynamic memristor with fading memory effect for reservoir computing

All WSe2 1T1R resistive RAM cell for future monolithic 3D embedded memory integration

Transition Metal Oxide Thin Film Based Nonvolatile Resistive Random Access Memory

Fully CMOS-Compatible 1T1R Integration of Vertical Nanopillar GAA Transistor and Oxide-Based RRAM Cell for High-Density Nonvolatile Memory Application

A High Throughput In-MRAM-Computing Scheme Using Hybrid P-Sot-mtj/gaa-cntfet

Nonvolatile and volatile resistive switching characteristics in MoS 2 thin film for RRAM application

Nonvolatile and Volatile Resistive Switching Characteristics in MoS2 Thin Film for RRAM Application