Abstract:High ionic conductivity and excellent lithium compatibility for sulfide solid electrolytes are vital to developing solid-state Li-metal batteries with high energy density and safety. Li7P2S8I has attracted significant attention due to its low cost, good stability towards lithium metal, and low annealing temperature. However, the low conductivity compared to liquid electrolyte and poor stability with Li metal at high current density limits its applications in solid-state batteries. In this work, the conductivity of Li7P2S8I is first increased from 1.53 mS/cm to 3.08 mS/cm by Cl- doping. The enhanced ionic conductivity is due to the introduction of S2-/Cl-/I- disorder structure in the structure. Then, the Li-ion conductivity of Li7P2S8I0.5Cl0.5 is enhanced up to 6.67 mS/cm via optimizing the pellet-making pressures and temperatures with the hot-press technique. Because of the superior conductivity, the assembled Li2S-LiI/Li7P2S8I0.5Cl0.5/Li-In battery delivers initial discharge capacities of 1051.0 mAh/g, 1385.0 mAh/g, and 713 mAh/g under 0.13 mAh/cm2 at room temperature, 60 °C, and 0 °C, respectively. Moreover, the capacity contribution of the Li7P2S8I0.5Cl0.5 electrolyte in cathode mixture are unraveled, which shows reversible charge/discharge more than 80 cycles and confirms the extra capacity from the electrolytes in the cathode mixture. The hot-press Li7P2S8I0.5Cl0.5 pellet shows excellent lithium compatibility and dendrite suppression capability, achieving stable lithium plating/stripping up to 280 h at 0.1 mA/cm2. The corresponding 3Li2S-LiI/Li7P2S8I0.5Cl0.5/Li battery delivers an initial discharge capacity of 474 mAh/g at 0.13 mA/cm2 and capacity retention of 83% after 30 cycles. This work provides a promising strategy to explore sulfide electrolytes enabling solid-state Li-Metal battery.

Synthesis of 3Li2S–1P2S5–xLiI solid electrolytes by liquid-phase shaking method for all-solid-state Li metal batteries

A High Air‐Stability and Li‐Metal‐Compatible Li3+2xP1−xBixS4−1.5xO1.5x Sulfide Electrolyte for All‐Solid‐State Li–Metal Batteries

Improvement of stability and solid-state battery performances of annealed 70Li2S–30P2S5 electrolytes by additives

Preparation of Li2S-AlI3-LiI Composite Solid Electrolyte and Its Application in All-Solid-State Li-S Battery

Synthesis of plate-like Li3PS4 solid electrolyte via liquid-phase shaking for all-solid-state lithium batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Preparation of Metal-Oxide-Doped Li7P2S8Br0.25I0.75 Solid Electrolytes for All-Solid-State Lithium Batteries

Achieving high-performance Li6.5Sb0.5Ge0.5S5I-based all-solid-state lithium batteries

Engineering high conductive Li7P2S8I via Cl- doping for all-solid-state Li-S batteries workable at different operating temperatures

Liquid-Phase Synthesis of the Li–Si–P–S–Cl Solid Electrolyte for All-Solid-State Li-Ion Battery

All-solid-state batteries with Li2O-Li2S-P2S5 glass electrolytes synthesized by two-step mechanical milling

LiF-doped sulfide solid electrolytes with a stabilized α-Li3PS4 analog phase for all-solid-state Li metal batteries

Insight on air-induced degradation mechanism of Li7P3S11 to design a chemical-stable solid electrolyte with high Li2S utilization in all-solid-state Li/S batteries

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries

Enhancing the electrochemical performances of Li7P3S11 electrolyte through P2O5 substitution for all-solid-state lithium battery

All-in-one improvement toward Li6PS5Br-Based solid electrolytes triggered by compositional tune

A Versatile Li<sub>6.5</sub>In<sub>0.25</sub>P<sub>0.75</sub>S<sub>5</sub>I Sulfide Electrolyte Triggered by Ultimate-Energy Mechanical Alloying for All-Solid-State Lithium Metal Batteries

A Versatile Li 6.5 In 0.25 P 0.75 S 5 I Sulfide Electrolyte Triggered by Ultimate‐Energy Mechanical Alloying for All‐Solid‐State Lithium Metal Batteries

Li2S6‐Integrated PEO‐Based Polymer Electrolytes for All‐Solid‐State Lithium‐Metal Batteries

A High‐Performance Li–B–H Electrolyte for All‐Solid‐State Li Batteries

Improved Ionic Conductivity and Li Dendrite Suppression Capability toward Li 7 P 3 S 11 -Based Solid Electrolytes Triggered by Nb and O Cosubstitution