Abstract:The automobile industry relies primarily on spot welding operations, particularly resistance spot welding (RSW). The performance and durability of the resistance spot-welded joints are significantly impacted by the welding quality outputs, such as the shear force, nugget diameter, failure mode, and the hardness of the welded joints. In light of this, the present study sought to determine how the aforementioned welding quality outputs of 0.5 and 1 mm thick austenitic stainless steel AISI 304 were affected by RSW parameters, such as welding current, welding time, pressure, holding time, squeezing time, and pulse welding. In order to guarantee precise evaluation and experimental analysis, it is essential that they are supported by a numerical model using an intelligent model. The primary objective of this research is to develop and enhance an intelligent model employing artificial neural network (ANN) models. This model aims to provide deeper knowledge of how the RSW parameters affect the quality of optimum joint behavior. The proposed neural network (NN) models were executed using different ANN structures with various training and transfer functions based on the feedforward backpropagation approach to find the optimal model. The performance of the ANN models was evaluated in accordance with validation metrics, like the mean squared error (MSE) and correlation coefficient (R2). Assessing the experimental findings revealed the maximum shear force and nugget diameter emerged to be 8.6 kN and 5.4 mm for the case of 1-1 mm, 3.298 kN and 4.1 mm for the case of 0.5-0.5 mm, and 4.031 kN and 4.9 mm for the case of 0.5-1 mm. Based on the results of the Pareto charts generated by the Minitab program, the most important parameter for the 1-1 mm case was the welding current; for the 0.5-0.5 mm case, it was pulse welding; and for the 0.5-1 mm case, it was holding time. When looking at the hardness results, it is clear that the nugget zone is much higher than the heat-affected zone (HZ) and base metal (BM) in all three cases. The ANN models showed that the one-output shear force model gave the best prediction, relating to the highest R and the lowest MSE compared to the one-output nugget diameter model and two-output structure. However, the Levenberg-Marquardt backpropagation (Trainlm) training function with the log sigmoid transfer function recorded the best prediction results of both ANN structures.

Investigation of the Extrapolation Capability of an Artificial Neural Network Algorithm in Combination With Process Signals in Resistance Spot Welding of Advanced High-Strength Steels

Artificial Neural Networks and Experimental Analysis of the Resistance Spot Welding Parameters Effect on the Welded Joint Quality of AISI 304

Comparison and Explanation of Data-Driven Modeling for Weld Quality Prediction in Resistance Spot Welding

Artificial neural networks applied to spot welding process modeling

Performances of Regression Model and Artificial Neural Network in Monitoring Welding Quality Based on Power Signal

Welding Quality Evaluation of Resistance Spot Welding Based on a Hybrid Approach

Model optimization of artificial neural networks for performance predicting in spot welding of the body galvanized DP steel sheets,

An Artificial Neural Network Model for Predicting Joint Performance in Ultrasonic Welding of Composites

Prediction of Resistance Spot Welding Quality Based on BPNN Optimized by Improved Sparrow Search Algorithm

Exploring Resistance Spot Welding for Grade 2 Titanium Alloy: Experimental Investigation and Artificial Neural Network Modeling

Predicting the Backside Width of Weld Pool During Pulsed Gtaw Process Based on A Neural Network Model

Performance Prediction in Spot Welding of Body Galvanized Steel Sheets Based on Artificial Neural Network and Its Optimization

Application of Artificial Neural Networks to Performance Predicting in Spot Welding of Zinc-Coated Steel Sheets

Weld Quality Monitoring Research in Small Scale Resistance Spot Welding by Dynamic Resistance and Neural Network

Online Estimation and Characteristic Analysis of Double Nugget Diameters During Aluminum/steel Resistance Spot Welding Process

A Neural Network Model for Predicting the Backside Dimension of Weld Pool During Pulsed Gtaw Process

Prediction of welding residual stress and deformation in electro-gas welding using artificial neural network

Neural Networks Applied for Predictive Parameters Analysis of the Refill Friction Stir Spot Welding Process of 6061-T6 Aluminum Alloy Plates

QUALITY PREDICTION AND MODEL EXPLANATION OF RESISTANCE SPOT WELDING PROCESS UNDER VARYING FIT-UP CONDITIONS

Collaborative Simulation of Nugget Growth and Process Signals for Resistance Spot Welding

A comparative study of multiple regression analysis and back propagation neural network approaches on plain carbon steel in submerged-arc welding