Abstract:Purpose Two corrosion inhibitors for closed cooling water systems, nitrite-based and mixture of nitrite and molybdate corrosion inhibitor, are often compared to each other. This study aims to optimize these two inhibitors in terms of concentration and pH for carbon steel protection, with insights into the double layer structure on surface and its impact on corrosion inhibition. Design/methodology/approach Electrochemical analysis including electrochemical impedance spectroscopy and potentiodynamic test are carried out for quick assessment of corrosion inhibition efficiency and optimization, which is confirmed by immersion test and microscopic analysis. The electronic properties of the surface film are analyzed through Mott–Schottky method which provides new insights into the inhibition mechanism and the role of each component in mixture inhibitor. Findings Mixture of nitrite and molybdate is shown to present higher inhibition efficiency, owning to the double layer structure. Nitrite alone can form a protective surface film, whereas molybdate leads to an n-type semiconductive film with lower donor density, hence giving rise to a better inhibition effect. Research limitations/implications Surface after inhibitor treatment has been carefully characterized to the microscopic scale, implying the effect of micro-structure, chemical composition and electronic properties on the corrosion resistance. Inorganic corrosion inhibitors can be tuned to provide higher efficiency by careful design of surface film structure and composition. Originality/value Almost every study on corrosion inhibitor applies such method for quick assessment of corrosion inhibition effect. Mott–Schottky test is one of electrochemical methods that reveals the electronic properties of the surface film. Previous works have studied the surface layer mainly through X-ray photoelectron spectroscopy. This study provides another insight into the surface film treated by nitrite and molybdate through Mott–Schottky analysis, and relates this structure to the corrosion inhibition effect based on multiple analysis including electrochemistry, microscopic characterization, thermodynamics and interface chemistry.

Analysis of the effectiveness of sulphite liquorbased inhibitors in metal corrosion protection

Anticorrosion Property of Alcohol Amine Modified Phosphoric and Tannic Acid Based Rust Converter and Its Waterborne Polymer-Based Paint for Carbon Steel

Rust Prevention Property of a New Organic Inhibitor under Different Conditions

Experimental and Theoretical Study on the Synergistic Inhibition Effect of Pyridine Derivatives and Sulfur-Containing Compounds on the Corrosion of Carbon Steel in CO2-Saturated 3.5 wt.% NaCl Solution

Inhibition behavior of new ecological corrosion inhibitors for mild steel, copper and aluminum in acidic environment: Theoretical and experimental investigation

Optimization and understanding of corrosion inhibitors for cooling water system

Мultifunctional Inhibitors of "INCORGAZ" and "AMDOR" Series against Hydrosulfide and Carbon Dioxide Corrosion of Steel

Experimental and Theoretical Study on the Synergistic Inhibition Effect of Pyridine Derivatives and Sulfur-Containing Compounds on the Corrosion of Carbon Steel in CO₂-Saturated 3.5 wt.% NaCl Solution

Investigation of Alumina-Doped Prunus domestica Gum Grafted Polyaniline Epoxy Resin for Corrosion Protection Coatings for Mild Steel and Stainless Steel

Study of Inhibition Performance of a Vapor Phase Inhibitor on Rusty Iron Coins

Corrosion Inhibition of Low-Alloy Steel by a Composite Pigment Based on Zeolite and Monocalcium Phosphate

Natural corrosion inhibitor of renewable eco-waste for SS-410 in sulfuric acid medium: adsorption, electrochemical, and computational studies

Inhibition of Carbon Steel Corrosion by Polyvinylpyrrolidone in Chloride-Acetate Solution and in Model Stratal Water

Experimental and Computational Anticorrosion Behaviors of Pyrazole s-Triazine/anilino-morpholino Derivatives for Steel in Acidic Solutions

New Formulation of Anticorrosive Waterborne Epoxy Coatings for SAE 1010 Steel Protection

Development and application of rust conversion coatings based on compound of polyphosphoric acid and tannin

Experimental and theoretical study of polysaccharides extracted from prickly pear nopales Pulp (PPUN) of Opuntia ficus-indica as corrosion inhibitors

Organic Inhibitors of Metal Corrosion in Acid Solutions. II. Ways of Increasing the Protective Action and Main Groups of Compounds

Effect of phosphate nature on the inhibitory capability of phosphate compositions

Synergistic corrosion inhibition study of Armco iron in sodium chloride by piperidin-1-yl-phosphonic acid–Zn2+ system

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium