Abstract:Objective. With the strong drive towards miniaturization of active implantable medical devices and the need to improve the resolution of neural stimulation arrays, there is keen interest in the manufacture of small electrodes capable of safe, continuous stimulation. Traditional materials such as platinum do not possess the necessary electrochemical properties to stimulate neurons safely when electrodes are very small (i.e. typically less than about 300 µm (78 400 µm2)). While there are several commercially viable alternative electrode materials such as titanium nitride and iridium oxide, an attractive approach is modification of existing Pt arrays via a high electrochemical capacitance material coating. Such a composite electrode could still take advantage of the wide range of fabrication techniques used to make platinum-based devices. The coating, however, must be biocompatible, exhibit good adhesion and ideally be long lasting when implanted in the body. Approach. Platinum foils were roughened to various degrees with regular arrays of laser milled pits. Conducting diamond films were grown on the foils by microwave plasma chemical vapor deposition. The adhesion strength of the films to the platinum was assessed by prolonged sonication and accelerated aging. Electrochemical properties were evaluated and compared to previous work. Main results. In line with previous results, diamond coatings increased the charge injection capacity of the platinum foil by more than 300% after functionalization within an oxygen plasma. Roughening of the underlying platinum substrate by laser milling was required to generate strong adhesion between the diamond and the Pt foil. Electrical stress testing, near the limits of safe operation, showed that the diamond films were more electrochemically stable than platinum controls. Significance. The article describes a new method to protect platinum electrodes from degradation in vivo. A 300% increase in charge injection means that device designers can safely employ diamond coated platinum stimulation electrodes at much smaller sizes and greater density than is possible for platinum.

Platinum Nanocrystal Assisted by Low‐Content Iridium for High‐Performance Flexible Electrode: Applications on Neural Interface, Water Oxidation, and Anti‐Microbial Contamination

Iridium Oxide-Platinum Nanocomposite Coating for Neural Electrode

Platinum‐Iridium Alloy Nanoparticle Coatings Produced by Electrophoretic Deposition Reduce Impedance in 3D Neural Electrodes

A Comparative Study on the Effect of Substrate Structure on Electrochemical Performance and Stability of Electrodeposited Platinum and Iridium Oxide Coatings for Neural Electrodes

Fabrication of High-Performance Neural Stimulation Electrode through Pulsed Electrochemical Deposition of IrOx onto Nano-Porous Platinum

Compositional and morphological properties of platinum-iridium electrodeposited on carbon fiber microelectrodes

Surface modification of neural stimulating/recording electrodes with high surface area platinum-iridium alloy coatings

Elevating Platinum to Volumetric Capacitance: High Surface Area Electrodes through reactive Pt sputtering

In-Situ Growth of Platinum Nanowires on Polydopamine for Enhancing Mechanical and Electrochemical Properties of Flexible Microelectrode Arrays

Platinum Monolayer on IrFe Core–Shell Nanoparticle Electrocatalysts for the Oxygen Reduction Reaction

Electrochemical and biological characterization of thin-film platinum-iridium alloy electrode coatings: a chronic in vivo study

Fabrication of Iridium Oxide Neural Electrodes at the Wafer Level

Hierarchical Structures on Platinum–iridium Substrates Enhancing Conducting Polymer Adhesion

Plasma Enhanced Atomic Layer Deposition of Iridium Oxide for Application in Miniaturized Neural Implants

Long term performance of porous platinum coated neural electrodes

Iridium nano-oxide as a neural electrode

Bimetallic Irni Core Platinum Monolayer Shell Electrocatalysts for the Oxygen Reduction Reaction

Anodically Electrodeposited Iridium Oxide Films Microelectrodes for Neural Microstimulation and Recording

A flexible bioelectrode based on IrO2–coated metallized polypropylene micromembrane

Nanostructured Porous Platinum Electrodes for the Development of Low-Cost Fully Implantable Cortical Electrical Stimulator

Electrically conducting diamond films grown on platinum foil for neural stimulation