Abstract:Municipal solid waste circulating fluidized bed incineration (MSWCFBI) fly ash was a hazardous waste, maintaining challenges for disposal. One effective approach was stabilizing the toxic heavy metal ions in the fly ash structures in situ. This work proposed a fusion–hydrothermal method, including fusion pretreatment in nitrogen atmosphere and microwave-assisted hydrothermal process, to treat three MSWCFBI fly ash samples. Specifically, leaching tests were performed to demonstrate the heavy metal stabilization. Through the treatment of the fusion–hydrothermal process, the concentrations of Cd, Cu, Zn, Pb, Ni, and Cr ions leaching from the fly ashes were obviously less than those of the raw fly ash and the sample only treated by hydrothermal process. Meanwhile, the heavy metal ions migrating from the fly ash to the hydrothermal residual liquid were reduced. Importantly, lots of zeolites formed during the fusion–hydrothermal process, such as to bermorite and sodalite. The fusion pretreatment significantly facilitated the conversion of quartz into amorphous silicon and silicate salts. Then, the silicon dissolution was accelerated and zeolite formation was promoted. Eventually, the heavy metal ions could be trapped in zeolite frameworks, enhancing the stabilization of heavy metal. Moreover, the cation-exchange capability values of the three treated fly ash were 1.099, 1.168, and 1.188 meq g−1, two-folder larger than those of the samples only treated by hydrothermal process. In summary, the fusion–hydrothermal method could facilitate the stabilization of heavy metal ions in the fly ash and the as-obtained solid product with high content of zeolite was promising for future applications.

Hydrothermal treatment of incineration fly ash for PCDD/Fs decomposition: the effect of iron addition

The Degradation of PCDD/Fs in Fly Ash Using Dielectric Barrier Discharge in a Lab-Scale Reactor

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

Decomposition and reformation pathways of PCDD/Fs during thermal treatment of municipal solid waste incineration fly ash.

Degradation of Dioxins in Chelated Municipal Solid Waste Incineration Fly Ash by Low-Temperature Pyrolysis

Thermal cotreatment of municipal solid waste incineration fly ash with sewage sludge for PCDD/Fs decomposition and reformation suppression

Hydrothermal Decomposition of Polychlorinated Divenzo-p-dioxins and Dibenzofurans in Fly Ash of Medical Waste Incinerator

Degradation of PCDD/Fs in MSWI Fly Ash Using a Microwave-Assisted Hydrothermal Process

Hydrothermal degradation of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in fly ash from municipal solid waste incineration under non-oxidative and oxidative conditions

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

[Influence of Additives on Decomposition of PCDD/Fs During MSWI Fly Ash Melting Process].

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Inﬂuence of Temperature and Atmosphere on Polychlorinated Dibenzo-P-dioxins and Dibenzofurans Desorption from Waste Incineration Fly Ash.

Improving Microwave-Assisted Hydrothermal Degradation of PCDD/Fs in Fly Ash with Added Na2HPO4 and Water-Washing Pretreatment.

Hydrothermal Oxidation Degradation of Dioxins in Fly Ash with Water-Washing and Added Ce-Mn Catalyst

Experimental Study on Low Temperature Thermal Treatment of Polychlorinated Dibenzo-P-dioxins and Dibenzofurans (pcdd/fs) in Fly Ash

Effect of supercritical water oxidation onthe PCDD/FS and heavy metals in incineration fly ash

The Effect of Adjusting Sinter Raw Mix on Dioxins from Iron Ore Co-Sintering with Municipal Solid Waste Incineration Fly Ash

DECOMPOSITION CHARACTERISTICS OF PCDD/Fs DURING MELTING PROCESS OF MUNICIPAL SOLID WASTE INCINERATOR FLY ASH

Effect of Fe2O3 on the Leaching Behavior of Cr in Hazardous Waste Incineration Fly Ash after Thermal Treatment

Comparative analyses of catalytic degradation of PCDD/Fs in the laboratory vs. industrial conditions.