Abstract:The central diaphragm is often used to reduce the span to maintain the stability and safety of structure in the construction of large-span loess tunnel due to the structure complexities. In this paper, relying on the field monitoring and measurement for Wangcun tunnel in Huangling-Yan’an expressway expansion project, the crown settlement and horizontal convergence of primary support steel rib and central diaphragm steel rib during the construction are analyzed by the upper bench CD method. According to the internal force transfer, deformation coordination, and arch foot displacement between the two structures, the support system is regarded as the arch-beam fixed structure with three times of statically indeterminate and movable abutment under the loads, and the mechanical calculation model of sidewall steel rib and the central diaphragm structure bearing loads and deformation together is established. Finally, through the mechanical model mentioned above, the deformation characteristics of central diaphragm structure and the horizontal convergence in the upper bench of tunnel are calculated and analyzed. The research shows the following: (1) the accumulated settlement of sidewall steel rib in Part I is greater than that of the sidewall steel rib in Part II, and the accumulated settlement of each part at the support structure during the tunnel excavation is less than the reserved deformation of 150 mm specified in the tunnel excavation; (2) the settlement located at the waist and maximum excavation line position of central diaphragm is mainly affected by the excavation of Parts I and II in upper bench; (3) during the whole excavation process, the excavation of Part I and Part II has the greatest influence on the convergence at arch waist and the maximum excavation line position in Part I, and the convergence at the above two positions all experienced four stages of “convergence-expansion-convergence-gradual stability”; and (4) the errors between the horizontal convergence and the deformation of central diaphragm obtained by the mechanical model and the field monitoring data are between 12.7% and 27.5%. The calculated results are in good agreement with the actual situation. The research can provide a theoretical basis for the study of deformation and mechanical properties for support structure in the construction of large-span loess tunnel by the upper bench CD method.

Mechanical performance of inclined Dougong bracket sets under vertical load: Experimental tests and finite element calculation

Analysis on the mechanical performance of Dougong bracket sets under eccentric vertical load

The Off-Axis Embedment Performance of Bamboo Panels Used for Glubam Structures

Mechanical properties of Dougong bracket in Chinese traditional timber structure under vertical loads: A systematic review

Experimental and numerical analysis on seismic behavior of corner Dou-Gong bracket in ancient timber buildings

Lateral Loading Performance of Lightweight Glubam Shear Walls

Experimental and Numerical Study on Dou-Gong Joint of Ancient Wooden Structure in Qing Dynasty

The Effects of Vertical Load and Gaps on Lateral Resistance of Fork-Column Dougong in Traditional MultiStory Wooden Structures

Rotational Behaviors of Fork-Column Dou-Gong: Experimental Tests and Hysteresis Model

Study of Deformation Behaviors and Mechanical Properties of Central Diaphragm in a Large-Span Loess Tunnel by the Upper Bench CD Method

Dowel bearing behavior of bamboo scrimber under different load-to-face grain angle

Experimental and numerical research on the analysis methods for buckling and post-buckling of inclined stiffened panel under shear load

In-plane Behavior of Chuan-Dou Style Wooden Frames with Infill under Cyclic Loading

Experimental and Numerical Studies on the Mechanical Performance of a Wall-beam-strut Joint with Mechanical Couplers for Prefabricated Underground Construction

Numerical investigation on the behaviour of the high-strength ring strengthened dowel connection under vertical load

Experimental and numerical study on structural behavior of folded dowel shear connection

An experimental and simulated investigation into the seismic performance of Chuan-dou timber structures with infilled walls

Mechanical properties of glulam moment-resisting joints reinforced by inclined self-tapping screws

Experimental Research on the Anti-Seismic Properties of a Five-Stamping Tou-Kung Joint of Ancient Chinese Buildings in the Ming Dynasty: A Case Study of Guang-yue Tower in Liaocheng City, Shandong Province

Simplified calculation model for typical Dou-gong under horizontal load

Effects of Chord Pre-Load on Strength of CHS X-joints Stiffened with External Ring Stiffeners and Gusset Plates