Abstract:To study the horizontal resistance of the column-head Dou-Gong (CHDG) in the traditional Chinese timber structure, the analytical model of CHDG without or with horizontal gap was proposed in this study. According to the structural form analysis of CHDG, the analytical model of CHDG considers the contact relationship between the components. CHDG has several distinct layers, of which the first layer is modeled as a rotation spring element and the second layer and above of CHDG are modeled as shear spring elements. Then, the horizontal resistance of CHDG was analyzed, and the horizontal load-displacement relationship of CHDG with horizontal gap appears triple polyline, while CHDG without horizontal gap is bilinear. Finally, the effects of parameters, including the length or width of Dadou bottom, height of Mantousun (MTS), width of horizontal gap, and vertical load, on the horizontal resistance was analyzed. The horizontal resistance of CHDG increases significantly with the length or width of the Dadou bottom, height of MTS, and vertical load increase, while the horizontal resistance of CHDG decreases significantly with width of horizontal gap increases. This study proposes theanalytical model of column-head Dou-Gong considering the interface between Dadou, Mantousun, and column head. Owning to the mechanical performances of semi-rigid joint of column-head Dou-Gong, the spring model is the core part of the analytical model of column-head Dou-Gong. The main conclusions are summarized as follows. (1) Analytical model of column-head Dou-Gong without or with horizontal gap containing the Dadou model and Mantousun model are established. It is assembled from a model among its different components. There is a rotation that occurs at the first layer of the column-head Dou-Gong and it is modeled as a rotation spring element; the second layer and above of th ecolumn-head Dou-Gong is modeled as shear spring elements, while the connecting beams are modeled by beam elements. (2) The horizontal resistance increases significantly as the length or width of the Dadou bottom increases. The relationship betweenthe displacement of intersection point 1 and the length or width of the bottom of the Dadou is a positive correlation. Displacement of intersection point 1 is a key parameter that affects the horizontal resistance. Therefore, in the restoration and protection of traditional Chinese timber structures, the goal of increasing the horizontal resistance, can be achieved by increasing the length or width of the Dadou bottom. (3) Compared with the column-head Dou-Gong without horizontal gaps, the column-head Dou-Gong with horizontal gaps will significantly reduce the horizontal resistance. The existence of horizontal gaps will greatly delay the bearing ofthe load on Mantousun, i.e. the Mantousun will play the bearing role later.

Rotational Behaviors of Fork-Column Dou-Gong: Experimental Tests and Hysteresis Model

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Experimental and Numerical Study on Dou-Gong Joint of Ancient Wooden Structure in Qing Dynasty

EXPERIMENTAL STUDIES ON HYSTERIC BEHAVIOR OF SQUARE CCFT COLUMN

Hysteretic behavior of GFRP retrofitted RC bridge short columns

The Effects of Vertical Load and Gaps on Lateral Resistance of Fork-Column Dougong in Traditional MultiStory Wooden Structures

Analysis on the mechanical performance of Dougong bracket sets under eccentric vertical load

Simplified calculation model for typical Dou-gong under horizontal load

Parameter optimization for Pivot hysteresis model for reinforced concrete columns with different failure modes

Structural Behavior of Traditional Dieh-Dou Timber Main Frame

The Analytical Model and Horizontal Resistance of the Column-Head Dou-Gong in the Traditional Chinese Timber Structure

Study on the Mechanical Behavior of Composite Special-Shaped Columns under Compression-Bending Without End Rotation Constraints

Effect of Dowel Joints on Dynamic Behavior of Train–discrete Floating Slab Track System

Mechanical performance of inclined Dougong bracket sets under vertical load: Experimental tests and finite element calculation

Evolution characteristics and performance evaluation of extended end-plate joints with single and double side connections under cyclic loading

Nonlinear Dynamic Behaviors and Stability of Circumferential Rod Fastening Rotor System

Experimental and numerical analysis on seismic behavior of corner Dou-Gong bracket in ancient timber buildings

Rotational Behavior and Modeling of Bolted Glulam Beam-to-column Connections with Slotted-in Steel Plate

Experimental Research on the Anti-Seismic Properties of a Five-Stamping Tou-Kung Joint of Ancient Chinese Buildings in the Ming Dynasty: A Case Study of Guang-yue Tower in Liaocheng City, Shandong Province

Experimental and Numerical Investigation into the Load Resistance and Hysteretic Response of Rhombic Grid Hyperboloid-Latticed Shells

Numerical modelling strategy and load resisting mechanism of palace-type traditional wooden frame