Abstract:Biological materials possess unique and desirable energy-absorbing mechanisms and structural characteristics worthy of consideration by engineers. For example, high levels of energy dissipation at low strain rates via triggering of crack delocalization combined with interfacial hardening by platelet interlocking are observed in brittle materials such as nacre, the iridescent material in seashells. Such behaviours find no analogy in current engineering materials. The potential to mimic such toughening mechanisms on different length scales now exists, but the question concerning their suitability under dynamic loading conditions and whether these mechanisms retain their energy-absorbing potential is unclear. This paper investigates the kinematic behaviour of an 'engineered' nacre-like structure within a high strain-rate environment. A finite-element (FE) model was developed which incorporates the pertinent biological design features. A parametric study was carried out focusing on (i) the use of an overlapping discontinuous tile arrangement for crack delocalization and (ii) application of tile waviness (interfacial hardening) for improved post-damage behaviour. With respect to the material properties, the model allows the permutation and combination of a variety of different material datasets. The advantage of such a discontinuous material shows notable improvements in sustaining high strain-rate deformation relative to an equivalent continuous morphology. In the case of the continuous material, the shockwaves propagating through the material lead to localized failure while complex shockwave patterns are observed in the discontinuous flat tile arrangement, arising from platelet interlocking. The influence of the matrix properties on impact performance is investigated by varying the dominant material parameters. The results indicate a deceleration of the impactor velocity, thus delaying back face nodal displacement. A final series of FE models considered the identification of an optimized configuration as a function of tile waviness and matrix properties. In the combined model, the optimized configuration was capable of stopping the ballistic threat, thus indicating the potential for bioinspired toughened synthetic systems to defeat high strain-rate threats.

Damage Mechanisms Perspective on Superior Ballistic Performance of Spinel over Sapphire

A possible mechanism for the difference in ballistic performance between sapphire and spinel

Simulation of ballistic performance of a two-layered structure of nanostructured metal and ceramic

Numerical simulation of ballistic performance of bimodal nanostructured metals

Impact response and damage evolution of triaxial braided carbon/epoxy composites. Part I: Ballistic impact testing

Simulation of Ballistic Performance of Coarse-Grained Metals Strengthened by Nanotwinned Regions

Order of influences on the ballistic resistance of armor ceramics and single crystals

Zn–Sr Mixing in the Y-sialon Glass: Formation, Properties and Ballistic Resistance

Dynamic mechanical properties and failure mechanism of magnesium aluminum spinel based on experiments and peridynamic simulations

Ballistic response and failure mechanisms of gradient structured Mg alloy

Unraveling the Effect of Material Properties and Geometrical Factors on Ballistic Penetration Energy of Nanoscale Thin Films

Dynamic Response of YAG Polycrystalline and Single‐crystal Transparent Ceramics: Experiments and Mesoscopic Simulations

Ballistic performance of Polycarbonate and Polymethyl methacrylate under normal and inclined dynamic impacts

Effect of different grinding strategies on subsequent polishing processes of sapphire

Experimental and numerical investigation on the ballistic resistance of ZK61m magnesium alloy plates struck by blunt and ogival projectiles

Performance of Ceramic-Composite Armors under Ballistic Impact Loading

The effect of crystal anisotropy and plastic response on the dynamic fracture of energetic materials

Ballistic performance of monolithic rubber-ceramic composite armor

Biologically inspired crack delocalization in a high strain-rate environment

Twinning Behavior and Lattice Rotation in a Mg–Gd–Y–Zr Alloy under Ballistic Impact

Law and mechanism of impact velocity on spalling and fracture behavior of single crystal nickel