Abstract:The mechanical behavior of ceramic composite armor is related to the type of projectile and the material properties of each component under high-speed impact. There exists a coupling effect between the ceramic, backing material, and the projectile during the impact process. Especially for brittle projectiles, there is a clear correlation between the damage evolution and the backing material. This study investigates the mechanical behavior and ballistic response of B4C ceramic composite armor resisting T12A steel projectiles using three different backing materials: Q235 steel, Kevlar, and UHMWPE laminates. Experiments and numerical simulations were conducted. The results show that the Rosin-Rammler distribution model can well describe the mass distribution of fragments of the brittle T12A steel projectile. The protective performance of ceramics against the T12A steel projectile depends on the dwell time, where the Q235 steel backing plate can prolong the interaction time between the projectile and the ceramic, leading to more erosion and fracture of the projectile. The fiber laminate primarily absorbs the remaining kinetic energy of the projectile through its own tensile and shear failure, without causing damage to the projectile. Due to its lower shear strength, the Kevlar laminate is quickly penetrated by the residual projectile, while the UHMWPE laminate undergoes more tensile deformation at the sublayer interface due to its higher tensile strength, absorbing more kinetic energy from the projectile. Furthermore, both the projectile and B4C ceramics fail due to the complex stress caused by compression waves and tensile waves. When the backing plate is Q235 steel, the peak stress inside the projectile is higher, resulting in more severe fragmentation of the projectile. However, the peak stress inside the ceramic remains relatively similar regardless of the different backing materials.

A possible mechanism for the difference in ballistic performance between sapphire and spinel

Damage Mechanisms Perspective on Superior Ballistic Performance of Spinel over Sapphire

Study on Anti-Penetration Performance of Semi-Cylindrical Ceramic Composite Armor against 12.7 mm API Projectile

Simulation of ballistic performance of a two-layered structure of nanostructured metal and ceramic

Numerical simulation of ballistic performance of bimodal nanostructured metals

Simulation of Ballistic Performance of Coarse-Grained Metals Strengthened by Nanotwinned Regions

Zn–Sr Mixing in the Y-sialon Glass: Formation, Properties and Ballistic Resistance

Order of influences on the ballistic resistance of armor ceramics and single crystals

Ballistic Behavior of Oblique Ceramic Composite Structure against Long-Rod Tungsten Projectiles

Dynamic properties of zirconia ceramic bullets under high speed impact

Coupling Effect of Brittle Projectiles and Ceramic Composite Armor with Different Backings

Ballistic performance of monolithic rubber-ceramic composite armor

Experimental and numerical investigation on the ballistic resistance of ZK61m magnesium alloy plates struck by blunt and ogival projectiles

A facile method for the estimation of ceramic performance in light armor systems

Study on the Protective Performance of High-Performance Multi-Scale (Sich-P+b4cp)/5083al Ceramic Array Armor with Excellent Ballistic Properties

A Novel Multi-Scale Ceramic-Based Array (SiCb+B4Cp)/7075Al as Promising Materials for Armor Structure

Numerical simulation of the penetration resistance of ceramic composite armor with corrugated structure

Penetration Characteristics of Ceramic/Metal Composite Armor Impacted by Different Projectiles

Mechanical Property and Ballistic Performance of Silicon Carbide

Ballistic analysis of high-performance armor steel by numerical simulation

An FEM-SPH Coupled Model for Simulating Penetration of Armor-Piercing Bullets into Ceramic Composite Armors and Glass Composite Armors