Abstract:The ever-growing demand for improved energy efficiency in buildings has stimulated a stream of research focused on innovative retrofit energy solutions. Laminated low emissivity (Low-E) type coated glass components can be used in retrofitting window systems for enhancing energy savings provided by the insulating properties of glass laminates containing these heat-mirror-type coatings. In particular, custom-designed double-silver low-E coatings embedded into the laminate structure (directly facing the polymer interlayers during and after the lamination) are of interest due to being protected from environmental exposure, enabling easy component transportation, storage, and window retrofits. In this study, we provide some details on the design of several reflector-type solar controls of low-E coatings of high environmental stability and demonstrate the feasibility of their fabrication on 3 mm thick glass substrates, followed by the lamination. We describe the optical properties of laminated structural glass components of potential usefulness for retrofitting window applications in new and existing buildings. Several thin-film coatings of a low-E type are deposited by using the RF magnetron sputtering technique and then subjected to lamination by using transparent epoxy and PVB materials, to be protected by a clear glass cover layer. The optical performance characteristics of these coatings (measured before and after lamination) elucidate the effects these lamination materials and cover glass thickness have on the final optical properties (leading to a slight reduction in the optical transmission in the visible spectral range, by around 8–10 % while retaining low thermal emissivity across the infrared spectral range). The outcomes of this research, if industrialized could contribute significantly to the development of sustainable building components and practices, and to acheiving a reduction in building energy consumption by way of enabling window retrofit operations at potentially reduced costs.

Thermal performance of secondary glazing as a retrofit alternative for single-glazed windows

Improving Thermal Performance of Dwelling Single Glass Windows Using Secondary Glazing in the UK

Thermal performance of retrofitted secondary glazed windows in residential buildings – two cases from Australia

Perceived benefits of retrofitted residential secondary glazing: an exploratory Australian study

Thermal performance of in-between shading systems in multilayer glazing units: Hot-box measurements and numerical simulations

Assessment of the visual, thermal and energy performance of static vs thermochromic double-glazing under different European climates

Secondary solar heat gain modelling of spectral-selective glazing based on dynamic solar radiation spectrum

Experimental and Numerical Studies of Heat Transfer through a Double-Glazed Window with Electric Heating of the Glass Surface

Thermal Transmittance (U-value) Evaluation of Innovative Window Technologies

Numerical Study on the Thermal Insulation of Smart Windows Embedded with Low Thermal Conductivity Materials to Improve the Energy Efficiency of Buildings

Natural Airflow in a Reversible Double-Glass Window with Reflective Film for Building Applications

Experimental Evaluation of Thermal and Lighting Performance Using Double Dynamic Insulated Glazing

Smart windows passively driven by greenhouse effect

Thermal Performance Analysis of Windows, Based on Argon Gas Percentages between Window Glasses

Energy saving potential of low-e coating based retrofit double glazing for tropical climate

A data-driven approach to thermal transmittance (U-factor) calculation of double-glazed windows with or without inert gases between the panes

Thermal performance and condensation risk of single-pane glazing with low emissivity coatings

Comparative study of simulation and experimentation for the U-value of double-glazed windows with inter-pane blinds

Performance Analysis of Multi-Purpose Fluidic Windows Based on Structured Glass-Glass Laminates in a Triple Glazing

In-situ evaluation of high-performance glazing based on illuminance and glare

Design, fabrication, and physical properties analysis of laminated Low-E coated glass for retrofit window solutions