Abstract:This paper presents experimental and theoretical studies of heat transfer through single- and double-glazed windows with electrical heating of the internal surfaces. Heating is achieved by applying a voltage to the low emissivity coating of the inner glass. A thermophysical model has been developed to simulate the heat transfer through these units, allowing us to determine their thermal characteristics. Experimental data are used to validate the numerical model. The resulting heat flux and temperature distributions on the external and internal surfaces of electrically heated double-glazed units are analysed. According to the results of experimental and numerical studies, it was found that the adopted electric heating scheme allows 83–85% of the heat to enter the room and 15–17% is removed to the outside. This makes it possible to increase the radiation component of the heat flow from the window to the room and improve the thermal comfort in the room. In general, this article shows that existing industrial windows with low-emissivity glass surface coating can be upgraded with simple and inexpensive modernisation, without compromising the main function of the window—efficient transmission of visible light—and create an additional (backup) heating device that can work effectively together with the existing heating system in the event of a sudden cold snap at low temperatures (below −20 °C), to prevent condensation of water vapour in the windows, and to prevent condensation on the surface of the window facade wall. Formally, a back-up (emergency) heating system is created in the room, which contributes to the energy sustainability of the building and therefore to energy security in general.

Thermal Transmittance (U-value) Evaluation of Innovative Window Technologies

A data-driven approach to thermal transmittance (U-factor) calculation of double-glazed windows with or without inert gases between the panes

Comparative study of simulation and experimentation for the U-value of double-glazed windows with inter-pane blinds

Numerical Study on the Thermal Insulation of Smart Windows Embedded with Low Thermal Conductivity Materials to Improve the Energy Efficiency of Buildings

Thermal enhancement of windows performance by means of innovative technologies

Evaluation of Thermal Comfort and Energy Consumption of Water Flow Glazing as a Radiant Heating and Cooling System: A Case Study of an Office Space

Natural Airflow in a Reversible Double-Glass Window with Reflective Film for Building Applications

Performance Demonstration and Simulation of Thermochromic Double Glazing in Building Applications

Thermal insulation performance of an advanced photovoltaic vacuum glazing: A numerical investigation and simulation

Thermal performance of in-between shading systems in multilayer glazing units: Hot-box measurements and numerical simulations

Investigation of heat transfer in a triple-glazing type window at greek climate conditions

Experimental Evaluation of Ventilated Glazing Performance in Hong Kong

Thermal performance testing of triple-glazing water flow window in cooing operation

Experimental and Numerical Studies of Heat Transfer through a Double-Glazed Window with Electric Heating of the Glass Surface

Experimental Analysis of Thermo-Technical Parameters of Windows Glazing in the Pavilion Laboratory

Performance Analysis of Multi-Purpose Fluidic Windows Based on Structured Glass-Glass Laminates in a Triple Glazing

Experimental and numerical performance investigation of a water-flow window with vacuum-glazing insulation

Heat Transfer through Double-Chamber Glass Unit with Low-Emission Coating

Method for Evaluating of the Convective Heat Transfer of Window for the Non-Uniform Radiator Heated Environment

Heat transfer coefficient of architectural window with energy efficient coating

Optimisation of wasted air utilisation in thermal loss reduction in double-glazed windows of commercial buildings in cold regions