Abstract:The ever-growing demand for improved energy efficiency in buildings has stimulated a stream of research focused on innovative retrofit energy solutions. Laminated low emissivity (Low-E) type coated glass components can be used in retrofitting window systems for enhancing energy savings provided by the insulating properties of glass laminates containing these heat-mirror-type coatings. In particular, custom-designed double-silver low-E coatings embedded into the laminate structure (directly facing the polymer interlayers during and after the lamination) are of interest due to being protected from environmental exposure, enabling easy component transportation, storage, and window retrofits. In this study, we provide some details on the design of several reflector-type solar controls of low-E coatings of high environmental stability and demonstrate the feasibility of their fabrication on 3 mm thick glass substrates, followed by the lamination. We describe the optical properties of laminated structural glass components of potential usefulness for retrofitting window applications in new and existing buildings. Several thin-film coatings of a low-E type are deposited by using the RF magnetron sputtering technique and then subjected to lamination by using transparent epoxy and PVB materials, to be protected by a clear glass cover layer. The optical performance characteristics of these coatings (measured before and after lamination) elucidate the effects these lamination materials and cover glass thickness have on the final optical properties (leading to a slight reduction in the optical transmission in the visible spectral range, by around 8–10 % while retaining low thermal emissivity across the infrared spectral range). The outcomes of this research, if industrialized could contribute significantly to the development of sustainable building components and practices, and to acheiving a reduction in building energy consumption by way of enabling window retrofit operations at potentially reduced costs.

Energy saving potential of low-e coating based retrofit double glazing for tropical climate

Determining Factor/s of Window Glazing Regarding Reduction in Electrical Energy Consumption

Design, fabrication, and physical properties analysis of laminated Low-E coated glass for retrofit window solutions

Improving Thermal Performance of Dwelling Single Glass Windows Using Secondary Glazing in the UK

Assessment of the visual, thermal and energy performance of static vs thermochromic double-glazing under different European climates

Natural Airflow in a Reversible Double-Glass Window with Reflective Film for Building Applications

Energy consumption analysis of glass house using electrochromic window in the subtropical region

Different alternative retrofit to improving the sustainability of building in tropical climate: multi-criteria decision-making

Simulation-Based Evaluation of the Impact of an Electrochromic Glazing on the Energy Use and Indoor Comfort of an Office Room

Potential building energy savings by passive strategies combining daytime radiative coolers and thermochromic smart windows

Investigation of CCF with TGU as Inner Skin to Reduce Peak Operating Temperature for Thermal Comfort in an Indoor Environment in a Hot, Humid Climate

Low energy consumption thermochromic smart windows with flexibly regulated photothermal gain and radiation cooling

Ventilation performance of a naturally ventilated double skin façade with low-e glazing

The performance analysis of a double-skin ventilated window integrated with CdTe cells in typical climate regions

Experimental Evaluation of Thermal and Lighting Performance Using Double Dynamic Insulated Glazing

Assessment of Gel-Based Thermochromic Glazing for Energy Efficiency in Architectural Applications

Energy optimization for Façade retrofit design of residential buildings in hot climates using advanced materials

Balancing preservation and utilization: Window retrofit strategy for energy efficiency in historic modern building

Optimisation of wasted air utilisation in thermal loss reduction in double-glazed windows of commercial buildings in cold regions

Combining photovoltaic double-glazing curtain wall cooling and supply air reheating of an air-conditioning system: Energy-saving potential investigation

Energy Savings in an Office Building with High WWR Using Glazing Systems Combining Thermochromic and Electrochromic Layers