Abstract:Abstract Windows are of great importance in improving the energy efficiency of buildings. It is possible to achieve this with the help of the regeneration of window design. The amount of energy used, the expense of heating and cooling, and the emissions of greenhouse gases that contribute to climate change can all be significantly reduced by improving the energy efficiency of windows. For this, computer modeling and BIM-based simulation programs provide significant timesaving in simultaneously evaluating design variations’ visual and thermal results. This study selected a four-story residential building to analyze the energy load and thermal comfort of the windows redesign and examine the energy-saving potential for residential buildings. To analyze the renewed window design strategies, a four-story apartment building is selected as a case study in Izmir/Turkey (38° 4′, 27° 2′). This apartment is built on a 90 m2 gross floor area. The existing indoor environmental conditions of the flat are generally observed as cool and low illuminated by the occupants, so the window design options must be compared and renewed. As the first option, current conditions are simulated. The second option is to simulate different patterns for window-to-wall ratio (WWR). Moreover, the third option is to simulate different types of glass in each window. Currently, the WWR of the selected flat in the north, east and south directions is around 10%. But more is needed to provide daylight to the apartment. This article used Autodesk Revit and Green Building Studio simulations to investigate WWR and glass types and evaluate energy use intensity’s (EUI) impact. As a result, this study shows that a 10% WWR on all building facades leads to an EUI of 993.9 MJ/m2/year. In contrast, increasing the WWR to 95% significantly increased EUI, reaching 2121 MJ/m2/year. In addition, it has been shown that the use of low U-value glasses, such as translucent wall panels and super-insulated three-pane clear Low-E, can provide energy savings of up to 5% per year, and especially the super-insulated three-pane Low-E glass type provides the highest efficiency on all facades.

Balancing preservation and utilization: Window retrofit strategy for energy efficiency in historic modern building

Energy retrofit technology for modern and contemporary educational historical buildings considering preservation and utilization aspects

Research on the Renovation of Historical Buildings and Improvement of the Residential Environment of Hangzhou Zhuyangxin Plaster Store

Energy Efficiency Optimization Strategies for University Research Buildings with Hot Summer and Cold Winter Climate of China Based on the Adaptive Thermal Comfort

Comprehensive energy, economic and thermal comfort assessments for the passive energy retrofit of historical buildings - A case study of a Victorian House renovation in the UK

Comprehensive energy, economic and thermal comfort assessments for the passive energy retrofit of historical buildings - A case study of a late nineteenth-century Victorian house renovation in the UK

Assessment of window renovation potential in an apartment with an energy performance approach

Historic buildings to Positive Energy Buildings: a trilemma between energy efficiency, lifecycle carbon and architecture conservation.

Different alternative retrofit to improving the sustainability of building in tropical climate: multi-criteria decision-making

A Simulation-Aided Approach in Examining the Viability of Passive Daylighting Techniques on Inclined Windows

Optimisation of wasted air utilisation in thermal loss reduction in double-glazed windows of commercial buildings in cold regions

Energy Performance Analysis and Study of an Office Building in an Extremely Hot and Cold Region

Providing thermal protection when replacing window blocks in historical buildings

Heating energy savings potential from retrofitting old apartments with an advanced double-skin façade system in cold climate

Optimizing Window Glass Design for Energy Efficiency in South Korean Office Buildings: A Hierarchical Analysis Using Energy Simulation

Thermal performance of retrofitted secondary glazed windows in residential buildings – two cases from Australia

Full-Scale Assessment of a Liquid CsWO 3 -SnO 2 Near-Infrared Shielding Coating and a Nanoceramic WO 3 Photochromic Window Film for In-Situ Window Retrofits

Experimental Evaluation of Ventilated Glazing Performance in Hong Kong

Improving Thermal Performance of Dwelling Single Glass Windows Using Secondary Glazing in the UK

Optimal retrofitting scenarios of multi-objective energy-efficient historic building under different national goals integrating energy simulation, reduced order modelling and NSGA-II algorithm

Assessing strategies for retrofitting cooling systems in historical buildings