Abstract:Advanced high-strength steel (AHSS) is of great technological interest in automotive lightweight applications. The dual-phase (DP) steel with a higher volume fraction of martensite has been rarely studied. In this work, the micromechanical deformation incompatibility of DP1180 steel was analyzed by a microstructure-based representative volume element (RVE) model. Via the electron-backscattered diffraction (EBSD) and the open-source software DREAM.3D, the statistically real microstructure-based RVE model was established. The flow curve of ferrite was obtained by the dislocation-based method. And the flow curve of martensite was obtained by the isostrain method (ISM) and the non-isostrain method (NISM). The simulation results showed good coincidence with the experiments. Furthermore, the ISM and the NISM were well clarified and improved. The microscale stress and strain in ferrite and martensite are approximately normal distributions due to the deformation incompatibility. The simulations verified that martensite carries much higher stress than ferrite. The mean value of strain in martensite is smaller than that in ferrite. And the strain variances of ferrite and martensite are similar. A larger variation range of stress triaxiality in ferrite indicates that the ferrite has gone through a more complex stress state. While the martensite has been approaching from the tension–compression state to the uniaxial-tension state. Consequently, the strain localization and damage initiation are predicted to be preferentially through ferrite compared to martensite, which is in good agreement with the results of the in situ tensile test. This paper provides a detailed analysis of the deformation incompatibility of the DP steel, especially in which the volume fraction of martensite is larger than that of ferrite. And it has theoretical significance for accurately predicting the micromechanical deformation behavior of multi-phase materials. Graphical

Hole Expansion Test and Characterization of High-Strength Hot-Rolled Steel Strip

Development of Powder Metallurgy High Speed Steel

Fracture characteristics of advanced high strength steels during hole expansion test

Hole expansion behavior of 1100 MPa grade dual-phase steel with superior stretch-flangeability

Effect of Planar Anisotropy on the Hole Expansion Ratio of Cold-Rolled DP 590 Steel

Understanding the damage initiation and growth mechanisms of two DP800 dual phase grades

Material Modeling of Hot-Rolled Steel Sheet Considering Differential Hardening and Hole Expansion Simulation

Mesoscale Deformation Incompatibility Analysis of DP1180 Steel

Strain partitioning characterization of advanced high strength steels using in-situ tensile tests with Micro digital image correlation – Methodology and analysis

Effect of prestrain on tensile behavior of HS800 steel sheet

Improvement of Hole-Expansion Property for Medium Carbon Steels by Ultra Fast Cooling after Hot Strip Rolling

Processing and characterization of high strength dual-phase steel by two-step intercritical heat treatment process

Dissimilar Resistance Spot Welding of Ferrite-Martensite Dual Phase Steel/Low Carbon Steel: Phase Transformations and Mechanical Properties

Influence of Post-Weld Heat Treatment on Microstructural and Mechanical Properties of Dual-Phase Steel Gas Metal Arc-Welded Joints

Effect of Inclusions and Microstructural Characteristics on the Mechanical Properties and Fracture Behavior of a High- Strength Low- Alloy Steel

On the mechanical heterogeneity in dual phase steel grades: Activation of slip systems and deformation of martensite in DP800

Setting Mechanical Properties of High Strength Steels for Rapid Hot Forming Processes

Studies on Hot Deformation Behavior and Dynamic Recrystallization in a High Al Ferritic Low-Density Steel

On the use of thermomechanical processing to enhance the strength-ductility-toughness balance of plain low-carbon steel

Novel miniature in situ hole expansion test coupled with microscopic digital image correlation

Enhanced strength and ductility of the low-carbon steel with heterogeneous lamellar dual-phase structure produced by cyclic intercritical rolling