Abstract:Traditional prediction of erosion focuses on the use of velocity and impact angle of particles as independent variables in analytically derived models. This approach is most suitable for numerical predictions of erosion in disperse flow fields where particle trajectories may easily be followed prior to impact. For dense particle flows, the prediction of individual particle or particle cluster movement is nearly never attempted by following trajectories. Instead, two-fluid Eulerian–Eulerian approaches are used in which a continuous particle fluid phase is considered.The present study shows that the impact velocity and angle of attack of particles at the eroding surface are difficult to obtain for dense flows, thus being difficult to consider as parameters for predicting erosion. Instead, it is proposed that the normal and the shearing components of the viscous dissipation of the particulate phase are more suitable as independent flow variables governing the erosion process. These variables describe deformation and cutting wear processes, respectively, and are readily derived from the flow field.Eulerian erosion models are proposed, based on these independent variables. It is possible to implement previous results and theories concerning the material–mechanical interaction between the abrasive and an eroding surface to achieve model improvements. In this work, only a simple model taking into account a threshold elastic strain limit is proposed, to more correctly model the deformation wear.The particle-flow boundary condition — a partial-slip condition — significantly influences the erosion process, particularly the cutting erosion. The boundary condition depends on parameters such as the local particle phase flow, the mean diameter and the sharpness of the abrasive as well as the surface roughness.A simple 2D test application — a jet stream of particles impinging a tilted plate — is presented, and the qualitative angular behaviour of ductile and brittle erosion is reproduced at the target position. A scheme is presented for determination of material constants and suitable boundary conditions to be used in the proposed erosion models.

Sculpting of an erodible body by flowing water

Yardangs sculpted by erosion of heterogeneous material

Emergence of tip singularities in dissolution patterns

Viewing Earth's surface as a soft matter landscape

Mathematical modeling of erosion and deposition in porous media

Unified Mechanical Erosion Model for Multi-phase Mass Flows

Streamwise Dissolution Patterns Created by a Flowing Water Film

Model for erosion-deposition patterns

Simulating shallow morphodynamic flows on evolving topographies

Origins of complexity in the rheology of Soft Earth suspensions

Shape Evolution of Fluid Deformable Surfaces under Active Geometric Forces

A mechanical erosion model for two-phase mass flows

Fluid-evolving landform interaction by a surface-tracking method

Mathematical modeling of deposition and erosion in porous media with branching channels

Asymmetric collapse by dissolution or melting in a uniform flow

Fluid dynamic mechanisms of particle flow causing ductile and brittle erosion

Fluid drainage in erodible porous media

Resolving the evolution of natural fragment shapes

Buoyancy driven dissolution of inclined blocks: Erosion rate and pattern formation

Multi-Scale Simulation of Fluid-Structure Interaction Induced Erosion on the Pipe Surface

Slope Erosion Induced by Surges of Debris Flow: Insights from Field Experiments