Abstract:Abstract A coupled hydro-mechanical erosion model is presented that is used for studying soil piping and erosion void formation under practical, in-situ conditions. The continuum model treats the soil as a two-phase porous medium composed of a solid phase and a liquid phase, and accounts for its elasto-plastic deformation behaviour caused by frictional sliding and granular compaction. The kinetic law characterizing the erosion process is assumed to have a similar form as the type of threshold law typically used in interfacial erosion models. The numerical implementation of the coupled hydro-mechanical model is based on an incremental-iterative, staggered update scheme. A one-dimensional poro-elastic benchmark problem is used to study the basic features of the hydro-mechanical erosion model and validate its numerical implementation. This problem is further used to reveal the interplay between soil erosion and soil consolidation processes that occur under transient hydro-mechanical conditions, thereby identifying characteristic time scales of these processes for a sandy material. Subsequently, two practical case studies are considered that relate to a sewer system embedded in a sandy soil structure. The first case study treats soil piping caused by suffusion near a sewer system subjected to natural ground water flow, and the second case study considers the formation of a suffosion erosion void under strong ground water flow near a defect sewer pipe. The effects on the erosion profile and the soil deformation behaviour by plasticity phenomena are elucidated by comparing the computational results to those obtained by modelling the constitutive behaviour of the granular material as elastic. The results of this comparison study point out the importance of including an advanced elasto-plastic soil model in the numerical simulation of erosion-driven ground surface deformations and the consequent failure behaviour. The numerical analyses further illustrate that the model realistically predicts the size, location, and characteristic time scale of the generated soil piping and void erosion profiles. Hence, the modelling results may support the early detection of in-situ subsurface erosion phenomena from recorded ground surface deformations. Additionally, the computed erosion profiles may serve as input for a detailed analysis of the local, residual bearing capacity and stress redistribution of buried concrete pipe systems.

Mathematical modeling of erosion and deposition in porous media

Mathematical modeling of deposition and erosion in porous media with branching channels

A mechanical erosion model for two-phase mass flows

Unified Mechanical Erosion Model for Multi-phase Mass Flows

Model for erosion-deposition patterns

Numerical Investigation of Sand-Bed Erosion by an Upward Water Jet

Modeling flow in porous media with double porosity/permeability: Mathematical model, properties, and analytical solutions

A coupled hydro-mechanical model for subsurface erosion with analyses of soil piping and void formation

Flow-induced channelization in a porous medium

Fluid flow channeling and mass transport with discontinuous porosity distribution

Numerical Modeling of Soil Erosion with Three Wall Laws at the Soil-Water Interface

Fluid-driven granular dynamics through a consistent multi-resolution particle method

Solid–fluid sequentially coupled simulation of internal erosion of soils due to seepage

Modeling of coupled heat transport and water flow in porous media and fractured rock masses

Modeling flow in porous media with double porosity/permeability: A stabilized mixed formulation, error analysis, and numerical solutions

Fluid dynamic mechanisms of particle flow causing ductile and brittle erosion

Modelling two-phase flow in porous media at the pore scale using the volume-of-fluid method

Modeling Multiphase Flow Through and Around Multiscale Deformable Porous Materials

Modeling Multicomponent Fluid Flow in Deforming and Reacting Porous Rock

Fluid flow through anisotropic and deformable double porosity media with ultra-low matrix permeability: A continuum framework

Modelling large-deforming fluid-saturated porous media using an Eulerian incremental formulation