Abstract:Traditional prediction of erosion focuses on the use of velocity and impact angle of particles as independent variables in analytically derived models. This approach is most suitable for numerical predictions of erosion in disperse flow fields where particle trajectories may easily be followed prior to impact. For dense particle flows, the prediction of individual particle or particle cluster movement is nearly never attempted by following trajectories. Instead, two-fluid Eulerian–Eulerian approaches are used in which a continuous particle fluid phase is considered.The present study shows that the impact velocity and angle of attack of particles at the eroding surface are difficult to obtain for dense flows, thus being difficult to consider as parameters for predicting erosion. Instead, it is proposed that the normal and the shearing components of the viscous dissipation of the particulate phase are more suitable as independent flow variables governing the erosion process. These variables describe deformation and cutting wear processes, respectively, and are readily derived from the flow field.Eulerian erosion models are proposed, based on these independent variables. It is possible to implement previous results and theories concerning the material–mechanical interaction between the abrasive and an eroding surface to achieve model improvements. In this work, only a simple model taking into account a threshold elastic strain limit is proposed, to more correctly model the deformation wear.The particle-flow boundary condition — a partial-slip condition — significantly influences the erosion process, particularly the cutting erosion. The boundary condition depends on parameters such as the local particle phase flow, the mean diameter and the sharpness of the abrasive as well as the surface roughness.A simple 2D test application — a jet stream of particles impinging a tilted plate — is presented, and the qualitative angular behaviour of ductile and brittle erosion is reproduced at the target position. A scheme is presented for determination of material constants and suitable boundary conditions to be used in the proposed erosion models.

Mathematical modeling of deposition and erosion in porous media with branching channels

Mathematical modeling of erosion and deposition in porous media

A mechanical erosion model for two-phase mass flows

Model for erosion-deposition patterns

Fluid flow channeling and mass transport with discontinuous porosity distribution

Unified Mechanical Erosion Model for Multi-phase Mass Flows

Flow-induced channelization in a porous medium

Modeling dynamic crack branching in unsaturated porous media through multi-phase micro-periporomechanics

A Darcy‐Brinkman‐Biot Approach to Modeling the Hydrology and Mechanics of Porous Media Containing Macropores and Deformable Microporous Regions

Modeling dynamic crack branching in unsaturated porous media through multi‐phase micro‐periporomechanics

Electrokinetics of Erosive Seepage through Deformable Porous Media

Solid–fluid sequentially coupled simulation of internal erosion of soils due to seepage

Modeling unsteady turbulent flows around immersed obstacles in a channel with complex geometry

Eulerian-Lagrangian investigation of erosion wear within a water-submerged Jet: Two-way coupling

Fluid-driven granular dynamics through a consistent multi-resolution particle method

An upscaled model for permeable biofilm in a thin channel and tube

Modeling of liquid-solid flow erosion in curved pipes of gradually varying cross section

Modeling of coupled heat transport and water flow in porous media and fractured rock masses

Fluid dynamic mechanisms of particle flow causing ductile and brittle erosion

Simulating two-phase flow and geomechanical deformation in fractured karst reservoirs based on a coupled hydro-mechanical model

Development and Application of a Braided River Model with Non-Uniform Sediment Transport