Abstract:In recent publications, we have proposed a model of fatigue damage to steels under multicyclic loading of smooth specimens and dependencies to describe the kinetics of fatigue limit reduction as a damage parameter. Such a decrease is due to the initial fatigue damage of the material at the microstructure level, which leads to the incubation of a crack in the zones of microstructural stress concentrators or its weakest elements, followed by germination along crystallographic planes and then by the transition to growth along forced planes under the action of normal stresses. In the currently known studies, fracture mechanics methods adapted to the growth of short cracks describe fatigue damage at the initial stages of fatigue. Their practical application is complicated by the need to determine the specific characteristics of the microstructure of materials, which are only sometimes available and unambiguous. In this regard, we consider a phenomenological approach based on the assumption of continuous fatigue damage of a material from the beginning of its cyclic loading until fracture or until the initiation of a non-propagating crack at the endurance limit. This damage can be described by a drop in the initial endurance limit to its standardized value at the French line and then to the level determined by the size of the crack at the fracture of the specimen. As the crack grows from the French line to fracture, the endurance limit corresponds to the threshold stress in the terminology of fracture mechanics. To describe the change in the endurance limit, a dependence is proposed that uses the parameters of the fatigue curve. A similar relationship is used to describe crack growth, which causes a decrease in the endurance limit.

Calibration of DC Potential Drop Method Considering Fatigue Load

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Fatigue Crack Monitoring Method Based on the Lamb Wave Damage Index

An innovative way to measure fatigue crack growth without COD gauge

General Rule of Method for Measurement of Thickness and Crack Size by Electric Potential Drop Technique: Outline of the NDIS3426:2008

Characterization of Fatigue Crack Propagation of Pitting-Corroded Rebars Using Weak Magnetic Signals

Characterization of Magnetic Field in Crack Propagation Stage and Application to Non-Destructive Evaluation

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

An automated measurement method for the fatigue crack propagation based on decorrelated digital image correlation

Statistical Analysis Methods of Fatigue Crack Growth Rate

Fatigue Crack Identification Method Based on Relative Change of Strain in Engine Block

Study on fatigue damage tolerance of rail steel materials using peridynamics

A research on fatigue crack growth monitoring based on multi-sensor and data fusion

A novel calibration method for PD measurements in power cables and joints using capacitive couplers

A review of fatigue damage detection and measurement techniques

A novel fatigue crack angle quantitative monitoring method based on rotating alternating current field measurement

Computational Monitoring of an Initial Fatigue Crack Incubation and Growth in a Smooth Specimen

Experimental study of crack tip deformation under fatigue load

Crankshaft High-Cycle Bending Fatigue Experiment Design Method Based on Unscented Kalman Filtering and the Theory of Crack Propagation

An analysis of fatigue crack features at various crack lengths through mating fracture surface pairs

In situ SEM-DIC technique and its application to characterize the high-temperature fatigue crack closure effect