Abstract:Journal of Composite Materials, Ahead of Print. In situ consolidation of the thermoplastic composites can be realized through laser-assisted automated fiber placement technology, and the properties of the composites are significantly affected by the crystallinity. Understanding the complicated crystallization process is very important for controlling the performance of the composites manufactured by automated fiber placement. In this work, the crystallization mechanism of carbon fiber/polyphenylene sulfide composites during the automated fiber placement process and its effect on the mechanical properties were investigated. Crystallization kinetics analysis indicated that the crystallization window of the carbon fiber/polyphenylene sulfide composites was 87–270°C. Furthermore, for carbon fiber/polyphenylene sulfide composites manufactured by automated fiber placement, the crystallinity was influenced by the parameters including laser temperature, placement speed and tool temperature, in which the tool temperature was the main factor. Increasing the tool temperature was an effective method to achieve high crystallinity. Meanwhile, when the tool temperature was in the range of the crystallization window, the composites could experience isothermal crystallization, which could further improve the crystallinity. With the increase of the tool temperature, the flexural strength and interlaminar shear strength were improved due to the enhanced self-adhesion of the matrix, while the Mode І fracture toughness was decreased because of the reduction of the matrix ductility. The combination of the kinetic method and experimental study was conducive to a better understanding of the crystallization mechanism and optimization of the processing conditions.

STUDY ON COOLING RATE-DEPENDENT MECHANICAL PROPERTIES OF THERMOPLASTIC COMPOSITES

Cooling rate-dependent mechanical properties of polyphenylene sulfide (PPS) and carbon fiber reinforced PPS (CF/PPS)

Effects of Cooling Rate on the Crystallinity and Mechanical Properties of Thermoplastic Composites

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

Influence of cooling rate on the properties of carbon fiber unidirectional composites with polypropylene, polyamide 6, and polyphenylene sulfide matrices

The effect of cooling rate on crystallization behavior and tensile properties of CF/PEEK composites

Effect of the cooling rate on the mechanical properties of glass fiber reinforced thermoplastic composites

Effect of the cooling rate on the fracture toughness of carbon fiber reinforced thermoplastic composites

Elucidation of crystalline morphology, crystallinity and mechanical properties of carbon fibre/PEEK composites under different cooling rates

Influence of Cooling Rate on Crystallization Behavior of Semi-Crystalline Polypropylene: Experiments and Mathematical Modeling

Computational study on temperature-dependencies of relaxation and elastic properties in anisotropic viscoelastic constitutive law for fiber-reinforced thermoplastic resin

The effect of cooling rates on crystallization and low-velocity impact behaviour of carbon fibre reinforced poly(aryl ether ketone) composites

Inherent relationship between process parameters, crystallization and mechanical properties of continuous carbon fiber reinforced peek composites

An analytical model for temperature and crystalline evolution analysis of carbon fiber reinforced polymer composites during cooling

Influence of strain rate and temperature on mechanical properties of carbon woven-ply PPS thermoplastic laminates under dynamic compression

Crystallization mechanism and mechanical properties of CF/PPS thermoplastic composites manufactured by laser-assisted automated fiber placement

Effects of thermal process conditions on crystallinity and mechanical properties in material extrusion additive manufacturing of discontinuous carbon fibre reinforced polyphenylene sulphide composites

Inverse Effects of Cooling Rates on the Interfacial Shear Strength of Carbon Fiber/PEEK Composites with and without Presence of Transcrystal Layers

Exploring the effect of cooling rate on non-isothermal crystallization of copolymer polypropylene by fast scanning calorimetry

Evaluation of thermal contact resistance of molten resin–mold interface during high-thermal-conductivity polyphenylene sulfide filling in injection molding

The Out-of-Plane Compression Response of Woven Thermoplastic Composites: Effects of Strain Rates and Temperature