Abstract:Taking into account the effect of planarity, alkyl chain steric hindrance and molecular weight towards high performance polymer solar cells, a planar semiconducting polymer PTOBDTDTffBT is designed. Minimal intra- and inter-molecular steric hindrances are realized by removing the alkyl chains at the 4,4'-positions of the DTffBT monomer and introducing shorter octyloxy chains on the BDT unit, respectively. Such a steric minimization strategy endows PTOBDTDTffBT with a high number average molecular weight of 343.37 kg mol(-1), a planar conjugated backbone and strong inter-molecular aggregation characteristics as well. The optical properties indicate that the aggregation can only be partially broken even at 160 C; theoretical calculations indicate that the polymer backbone has small distortion and the thiophene-phenyl bridge can move the octyloxy chains outward by 6.77 A from the polymer backbone, both of which ensure the strong inter-chain aggregation. In spite of the high planarity and strong aggregation of the polymer, PTOBDTDTffBT is relatively amorphous in its film form, indicated by grazing incidence X-ray diffraction analysis. PTOBDTDTffBT exhibits a narrow bandgap of 1.71 eV together with a high ionization potential of 5.46 eV. Because of the strong aggregation of the polymer, the PTOBDTDTffBT/PC71BM active layer exhibits temperature-dependent photovoltaic performance. When the active layer is spin-coated at a relatively low temperature below 100 degrees C, PTOBDTDTffBT/PC71BM exhibits a stable power conversion efficiency above 6.6%. However, when the temperature is elevated from 120 degrees C to 160 degrees C, the power conversion efficiency decreased gradually to 3.58% because of the decreased short-circuit current density and fill factor. The temperature-dependent photovoltaic performance is explained by the fact that the PC71BM is easily spun out from the solution at higher temperatures as confirmed by the UV-vis absorption and X-ray photoelectron spectroscopy analysis. High temperatures can also lead to coarse morphology and large phase separation in the active layer observed from the atomic force microscopy and transmission electron microscopy images. Finally, a maximum power conversion efficiency of 7.68% is obtained when the active layer is spin-coated at 80 degrees C, which is a significant improvement of the power conversion efficiency for the planar PBDTDTffBT series.

Design, Application, and Morphology Study of a New Photovoltaic Polymer with Strong Aggregation in Solution State

Design, Application, and Morphology Study of a New Photovoltaic Polymer with Strong Aggregation in Solution State

Manipulating backbone structure to enhance low band gap polymer photovoltaic performance

Temperature-Modulated Optimization of High-Performance Polymer Solar Cells Based on Benzodithiophene–Difluorodialkylthienyl–Benzothiadiazole Copolymers: Aggregation Effect

Molecular Design Toward Efficient Polymer Solar Cells with High Polymer Content.

Molecular Design and Application of a Photovoltaic Polymer with Improved Optical Properties and Molecular Energy Levels

Side Chain Influence on the Morphology and Photovoltaic Performance of 5-Fluoro-6-alkyloxybenzothiadiazole and Benzodithiophene Based Conjugated Polymers.

High performance polymer solar cells based on a two dimensional conjugated polymer from alkylthienyl-substituted benzodifuran and benzothiadiazole

Control of Mesoscale Morphology and Photovoltaic Performance in Diketopyrrolopyrrole‐Based Small Band Gap Terpolymers

Manipulation of Domain Purity and Orientational Ordering in High Performance All-Polymer Solar Cells

Side Chain Selection for Designing Highly Efficient Photovoltaic Polymers with 2D-Conjugated Structure

Side-chain Effect on the Photovoltaic Performance of Conjugated Polymers Based on Benzodifuran and Benzodithiophene-4,8-dione

Rational Design Of Asymmetric Benzodithiophene Based Photovoltaic Polymers For Efficient Solar Cells

Significant enhancement of polymer solar cell performance via side-chain engineering and simple solvent treatment

Influence of Processing Parameters and Molecular Weight on the Morphology and Properties of High‐Performance PffBT4T‐2OD:PC71BM Organic Solar Cells

Enhanced Performance And Morphological Evolution Of Ptb7:Pc71bm Polymer Solar Cells By Using Solvent Mixtures With Different Additives

Benzodithiophene-Dithienylbenzothiadiazole Copolymers for Efficient Polymer Solar Cells: Side Chain Effect on Photovoltaic Performance.

Highly Efficient Random Terpolymers for Photovoltaic Applications with Enhanced Absorption and Molecular Aggregation

Steric-Hindrance Modulation Toward High-Performance 1,3-Bis(thieno[3,4-b]thiophen-6-yl)-4h-thieno[3,4-c]pyrrole-4,6(5h)-dion E-Based Polymer Solar Cells with Enhanced Open-Circuit Voltage

Steric Minimization Towards High Planarity And Molecular Weight For Aggregation And Photovoltaic Studies

Temperature‐Dependent and Aggregation‐Breaking Strategy for Benzodifuran‐Constructed Organic Solar Cells