Abstract:The Floc and Sink technique promotes, through the application of coagulants and clays, the removal of phosphorus and algal biomass from the water column by flocculation and sedimentation. Although it is a promising technique for mitigating harmful cyanobacterial blooms, little is known about the impacts on other phytoplankton species as well as it is not known how species with mechanisms of resistance to sedimentation respond to the application of these products. In this study, a laboratory experiment was carried out with water from a eutrophic reservoir to assess the impact of applying aluminum-based coagulants, aluminum sulfate and polyaluminium chloride, and chitosan, alone and combined with lanthanum modified bentonite and natural bentonite on the phytoplankton community, in a functional approach based on morphology (Morphology-Based Functional Groups - MBFG, Kruk et al., 2010 and Reynolds et al., 2014), with an emphasis on the characteristics that provide resistance to sedimentation. We tested two hypotheses: phytoplankton species with adaptive mechanisms that provide buoyancy to cells are more resistant to the removal from the water column by coagulants and clays; and coagulants based on metals and modified clays are more efficient in sedimentation of microalgal cells compared to natural products, regardless of the presence of an adaptive mechanism of resistance to sedimentation. Our results showed that aluminum sulfate and polyaluminium chloride alone or combined with lanthanum modified bentonite and natural bentonite effectively sedimented the cells, regardless of the presence of buoyancy mechanisms. In contrast, the natural coagulant chitosan alone or combined with lanthanum modified bentonite and natural bentonite removed only those species that were small-celled or small colonial without specialized structures or with the presence of spines, arms and siliceous exoskeleton. In the case of species with aerotopes and flagella, the removal was not effective and still caused an increase in algal biomass due to the formation of suspended cell aggregates on the surface of the water column of the experimental units. Therefore, we concluded that the Floc and Sink technique has an impact on the phytoplankton community because it removes from the water column species that are not the target of coagulants and clays, but that are considered important sources of energy in freshwater trophic webs. This result differs according to the type of product used as well as it is related to the morphological adaptations that favor the buoyancy of cells in the water column. Species with aerotopes and flagella are more resistant to sedimentation and may make the use of products applied in the Floc and Sink technique unfeasible. Nevertheless, these results represent only an immediate effect of the technique on the phytoplankton community, thus requiring a longer time scale evaluation to determine the algae that can effectively recover water column. Therefore, we also emphasize that algae of nutritional value can recover over time and make the long-term application of the technique acceptable.

Control of internal phosphorus loading using coagulants and clays in water and the sediment of a semiarid reservoir susceptible to resuspension

Impacts of the Floc and Sink technique on the phytoplankton community: A morpho-functional approach in eutrophic reservoir water

The use of coagulant and natural soil to control cyanobacterial blooms in a tropical reservoir

The role of bioturbation triggered by benthic macroinvertebrates in the effectiveness of the Floc & Lock technique in mitigating eutrophication

Effects of polyaluminum chloride and lanthanum-modified bentonite on the growth rates of three Cylindrospermopsis raciborskii strains

'Floc and Sink' Technique Removes Cyanobacteria and Microcystins from Tropical Reservoir Water

Enhanced nutrient control efficiency in sediments using modified clay inactivation coupled with aquatic vegetation in the confluence area of a eutrophic lake

The efficiency of combined coagulant and ballast to remove harmful cyanobacterial blooms in a tropical shallow system

Role of submerged macrophytes in sediment phosphorus stabilization in shallow lakes from the Brazilian semiarid region

Influence of sediment resuspension on the efficacy of geoengineering materials in the control of internal phosphorous loading from shallow eutrophic lakes

Resuspension and settlement characteristics of lake sediments amended by phosphorus inactivating materials: Implications for environmental remediation

Comparison of dredging, lanthanum-modified bentonite, aluminium-modified zeolite, and FeCl2 in controlling internal nutrient loading

Investigating the use of coagulants and Ca 2+ -rich steel residues as an anti-fouling strategy in the ultrafiltration of microalgae: Towards sustainable resource recovery from wastewater

Removal of phosphorus by modified bentonite:polyvinylidene fluoride membrane-study of adsorption performance and mechanism

Coagulation Removal of Phosphorus from a Southern China Reservoir in Different Stages of Algal Blooms: Performance Evaluation and AlP Matching Principle Analysis.

Influence of land use on spatial distribution of mobile phosphorus forms in the sediment of a tropical semi-arid reservoir

Use of Lanthanum/aluminum Co-Modified Granulated Attapulgite Clay As a Novel Phosphorus (P) Sorbent to Immobilize P and Stabilize Surface Sediment in Shallow Eutrophic Lakes

Ecotoxicological assessment of bauxite residue (red mud) overflow treated by dissolved air flotation (DAF)

In situ control of internal nutrient loading and fluxes in the confluence area of an eutrophic lake with combined P inactivation agents and modified zeolite

Contrasting effects and mode of dredging and in situ adsorbent amendment for the control of sediment internal phosphorus loading in eutrophic lakes

Enhanced Flocculation Using Drinking Water Treatment Plant Sedimentation Residual Solids