Abstract:The Floc and Sink technique promotes, through the application of coagulants and clays, the removal of phosphorus and algal biomass from the water column by flocculation and sedimentation. Although it is a promising technique for mitigating harmful cyanobacterial blooms, little is known about the impacts on other phytoplankton species as well as it is not known how species with mechanisms of resistance to sedimentation respond to the application of these products. In this study, a laboratory experiment was carried out with water from a eutrophic reservoir to assess the impact of applying aluminum-based coagulants, aluminum sulfate and polyaluminium chloride, and chitosan, alone and combined with lanthanum modified bentonite and natural bentonite on the phytoplankton community, in a functional approach based on morphology (Morphology-Based Functional Groups - MBFG, Kruk et al., 2010 and Reynolds et al., 2014), with an emphasis on the characteristics that provide resistance to sedimentation. We tested two hypotheses: phytoplankton species with adaptive mechanisms that provide buoyancy to cells are more resistant to the removal from the water column by coagulants and clays; and coagulants based on metals and modified clays are more efficient in sedimentation of microalgal cells compared to natural products, regardless of the presence of an adaptive mechanism of resistance to sedimentation. Our results showed that aluminum sulfate and polyaluminium chloride alone or combined with lanthanum modified bentonite and natural bentonite effectively sedimented the cells, regardless of the presence of buoyancy mechanisms. In contrast, the natural coagulant chitosan alone or combined with lanthanum modified bentonite and natural bentonite removed only those species that were small-celled or small colonial without specialized structures or with the presence of spines, arms and siliceous exoskeleton. In the case of species with aerotopes and flagella, the removal was not effective and still caused an increase in algal biomass due to the formation of suspended cell aggregates on the surface of the water column of the experimental units. Therefore, we concluded that the Floc and Sink technique has an impact on the phytoplankton community because it removes from the water column species that are not the target of coagulants and clays, but that are considered important sources of energy in freshwater trophic webs. This result differs according to the type of product used as well as it is related to the morphological adaptations that favor the buoyancy of cells in the water column. Species with aerotopes and flagella are more resistant to sedimentation and may make the use of products applied in the Floc and Sink technique unfeasible. Nevertheless, these results represent only an immediate effect of the technique on the phytoplankton community, thus requiring a longer time scale evaluation to determine the algae that can effectively recover water column. Therefore, we also emphasize that algae of nutritional value can recover over time and make the long-term application of the technique acceptable.

The use of coagulant and natural soil to control cyanobacterial blooms in a tropical reservoir

'Floc and Sink' Technique Removes Cyanobacteria and Microcystins from Tropical Reservoir Water

The efficiency of combined coagulant and ballast to remove harmful cyanobacterial blooms in a tropical shallow system

Impacts of the Floc and Sink technique on the phytoplankton community: A morpho-functional approach in eutrophic reservoir water

Control of internal phosphorus loading using coagulants and clays in water and the sediment of a semiarid reservoir susceptible to resuspension

Low Dose Coagulant and Local Soil Ballast Effectively Remove Cyanobacteria (Microcystis) from Tropical Lake Water without Cell Damage

Coagulation as an effective method for cyanobacterial bloom control: A review

Cyanobacterial Removal by a Red Soil-Based Flocculant and Its Effect on Zooplankton: an Experiment with Deep Enclosures in a Tropical Reservoir in China

Suppressing cyanobacterial dominance by UV-LED TiO2-photocatalysis in a drinking water reservoir: A mesocosm study

Removal of Positively Buoyant Planktothrix rubescens in Lake Restoration

Mitigating harmful cyanobacterial blooms in drinking water reservoirs through in-situ sediment resuspension

Management of Eutrophication Using Combined the 'flock & Sink' Mitigation Technique and Submerged Plants Restoration: a Mesocosm Study

Removal of cyanobacteria using novel pre-pressurized coagulation: The effect of cellular properties and algogenic organic matter characteristics

Advanced Electrochemical Strategies for Simultaneous Removal of Microcystis Aeruginosa and Microcystin-Lr: On-demand Optimization and Mechanistic Insights

Removal of Microcystis Aeruginosa and Control of Algal Organic Matters by Potassium Ferrate(vi) Pre-Oxidation Enhanced Fe(II) Coagulation

Screening of plant extracts for a microcosm in vivo test of inhibition of the toxic bloom-forming cyanobacteria Chrysosporum ovalisporum

Application of Response Surface Methodology to Optimize Coagulation Treatment Process of Urban Drinking Water Using Polyaluminium Chloride

Nitrogen and phosphorus removal from synthetic aquaculture water through electrocoagulation

Usage of Flocculation in Emergent Control of Algal Bloom in Drinking Water Supplying Reservoir

Effects of polyaluminum chloride and lanthanum-modified bentonite on the growth rates of three Cylindrospermopsis raciborskii strains

Investigating the use of coagulants and Ca 2+ -rich steel residues as an anti-fouling strategy in the ultrafiltration of microalgae: Towards sustainable resource recovery from wastewater