Abstract:This article applies and critically compares essentially all methods (based on Arrhenius temperature dependence and power law reduced mass) to deduce the degradation parameters of polyether ether ketone (PEEK) and its carbon fibre composites, PEEK+CF, from thermogravimetric analysis experiments in nitrogen. The methods used include classical (and variations) analytical approximate methods, a method applying the genetic algorithm for optimization and the Distributed Activation Energy Model, usually not discussed with the other methods. The analytical methods are fast and easy to implement but they are limited to degradation kinetics having a single peak or individual separated peaks in the mass loss rate. By contrast, the genetic algorithm gives good results if a postulated mechanism of several Arrhenius reactions of arbitrary order is considered. Moreover, the Distributed Activation Energy Model provides the possibility to assess the assumption of overlapping first-order reactions having various activation energies. The degradation of PEEK and its composite is basically characterized by two regimes, one fast degradation regime (570 °C–630 °C approximately) and one much slower degradation regime (630 °C–800 °C approximately) at a mass degradation rate with time being simply proportional to the heating rate, a very remarkable new result by itself. However, the focus of the modelling in this work lies in the first fast degradation regime. It is shown that the Distributed Activation Energy Model and the genetic algorithm can simulate well the experimental results noting, however, that the Distributed Activation Energy Model is based on more physically determined activation energies. By contrast, the classical methods (Kissinger and modified Ozawa methods) are not able to reproduce the mass loss rates in the initial fast degradation regime (570 °C–630 °C) of pure PEEK and PEEK+CF composite. Although a physical explanation of the degradation mechanisms is desirable, the end game is to find out whether a method even not including the whole truth about a process is yet capable of reproducing the measurements accurately.

Degradation kinetics of polytetrafluoroethylene and poly(ethylene-alt-tetrafluoroethylene)

A Kinetic Model for the Chemical Degradation of Perfluorinated Sulfonic Acid Ionomers: Weak End Groups Versus Side Chain Cleavage

Thermal degradation of polymers. I. Aspects of polytetrafluoroethylene degradation

The radiation degradation of polytetrafluoroethylene resulting in low-molecular and functionalized perfluorinated compounds

Polytetrafluoroethylene decomposition in air and nitrogen

Mechanistical studies on the electron-induced degradation of polymers: polyethylene, polytetrafluoroethylene, and polystyrene

Kinetic Modeling of Thermal Degradation of TDI/MDI-Based Flexible Polyurethane Foam under Nitrogen and Air Atmospheres with Shuffled Complex Evolution Algorithm: Insights from TG-FTIR Analysis.

Comparison of methods for thermal analysis: Application to PEEK and a composite PEEK+CF

Thermal degradation of polytetrafluoroethylene, modified polytetrafluoroethylene, and their nanocomposites with boron nitride nanobarbs: Lifetime predictions and kinetic analysis

Oxidative thermal degradation of polytetrafluoroethylene

Thermal properties and degradation of polytetrafluoroethylene low‐molecular fractions

Atomic insights into the thermal degradation of polyethylene terephthalate combining STA-FTIR and DFT methods

Thermal Degradation Kinetics of Ethylene-Vinyl Acetate Copolymer Containing Hydrotalcite and Red Phosphorus

Thermal degradation of polyethylene and polytetrafluoroethylene during vacuum evaporation

A Kinetic Study of the Thermal Degradation of Nylon-6/Attapulgite Nanocomposites

Thermal degradation of polytetrafluoroethylene in flowing helium atmosphere II. Product distribution and reaction mechanism

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Thermal- and photo-induced degradation of perfluorinated carboxylic acids: Kinetics and mechanism

Kinetic Analysis of Thermal Degradation of Recycled Polypropylene and Polystyrene Mixtures Using Regenerated Catalyst from Fluidized Catalytic Cracking Process (FCC)

Kinetics of Thermo-Oxidative Degradation of Polypropylene/Aluminum Trihydroxide/Organo Fe-Montmorillonite Nanocomposites

Thermal Degradation Kinetics of Poly (vinyl chloride)