Abstract:The quest for new, alternative energy sources and technologies have risen due to myriads of crises associated with fossil fuel dominated energy mix in Nigeria, in terms of supply and its adverse effect on the environment. Experimental study of hybrid flat-plate solar collector/nocturnal radiator for water heating and cooling in Owerri, Nigeria, is presented. The experimental rig consists of a single flat surface (absorber plate) made of a mild steel plate, film-coated with an acrylic resin which made the surface spectrally selective. Underneath, were arrays of copper tube risers. A sample test on acrylic resin’s coating, on a metallic substrate showed that it has high clear spectral absorptivity (low emissivity) in the solar radiation band (0.2-0.3μm) as well as low absorptivity (high emissivity) in the atmospheric window band (3-8μm). A water reservoir 2m above was connected to the system inlet header to supply water. Experimental data were harvested for days/nights through a read-out basic language programmed data logger. The experimentation were conducted under the metrological condition of Federal Polytechnic Nekede Owerri (5.49oN, 7.02oE), South-East Nigeria. The results obtained under solar heating phase showed a peak water temperature of 600C at a plate temperature of about 800C and a heat collection efficiency of 31%. The peak insolation was about 900W/m2 and the ambient temperature was between 270C and 320C throughout the diurnal phase. Also, under the nocturnal radiation phase, a cooling power of 41w/m2 was achieved during cooling on clear night and about 20w/m2 on a cloudy night. Water temperature in the range of 190C to 200C was recorded at temperature depression of about 50C. The night sky temperature of the location was obtained in the range 100C to 160C for the period under study. The result shows that the system can provide substantial energy savings when incorporated into building structure, to providing hot and cold water for domestic/process use, space heating and cooling applications.

Experimental and Numerical Study of Thermal Performance for Flat Plate Solar Water Heater in Najaf

Numerical Study to Investigate the Performance of U-shaped Flat Plate Solar Collector Using Phase Change Materials (PCMs)

Experimental evaluation of the performance of a domestic water heating system under Baghdad climate conditions

Experimental Study and Exergy Analysis About the Flat Plate Solar Collector

Experimental and numerical study to develop TRANSYS model for an active flat plate solar collector with an internally serpentine tube receiver

Tilt Angle Optimization and Investigation of the Behavior of a Flat Plate Solar Collector Using MATLAB for Kurdistan Climate Conditions-Iraq

Dynamic Simulation and Optimization of Flat Plate Solar Collector Parameters Using the MATLAB Program for Erbil-Iraq Climate Condition

Experimentally validated axisymmetric simulation for thermo-fluid performance of an active flat-plate solar water heater at low flow rates

Performance study of parabolic trough solar collector using hybrid nanofluids under Jordanian weather conditions

Experimental evaluation of photovoltaic thermal (PVT) system using a modular heat collector with flat back shape fins, pipe, nanofluids and phase change material

Experimental investigation on thermal performance of solar water heater equipped with Serpentine fin core heat exchanger

Impact of hybrid nanofluid on thermal behavior of flat-plate solar collector: performance study

A Numerical Study to Improve the Efficiency of Solar Collector used for water heating using Phase Change Material

Numerical Simulation of the Thermal Performance of a Tubular Solar Air Heater

Energy and exergy experimental analysis for innovative finned plate solar air heater

CFD-thermal analysis of flat plate solar collector for different temperature variations

Long-Term Performances and Technoeconomic and Environmental Assessment of Al2O3/Water and MWCNT/Oil Nanofluids in Three Solar Collector Technologies

Numerical analysis with experimental validation for thermal performance of flat plate solar water heater using CuO/distilled water nanofluid in closed loop

Thermal Performance of a Flat-Plate Solar Collector for Drying Agricultural Crops

Thermal cooling efficacy of a solar water pump using Oldroyd-B (aluminum alloy-titanium alloy/engine oil) hybrid nanofluid by applying new version for the model of Buongiorno

Experimental Study of Hybrid Flat-Plate Solar Collector/Nocturnal Radiator for Water Heating and Cooling in Owerri, Nigeria