Abstract:In the present work, Multi-Wall Carbon Nanotubes (MWCNT)/water nanofluids are used to increase the performance of a shell and tube heat exchanger (STHX) while reducing energy consumption and overall cost. MWCNT/water with 0.3% and 0.05% volume fractions were studied for stability and thermophysical characteristics. At a 0.3% volume fraction, a substantial improvement in the heat transfer coefficient of around 31.08 % was found compared to the base fluid. Experiments were conducted on STHX, and the results show that using nanofluid at a volume fraction of 0.3% improves heat exchanger efficacy by 5.49% compared to the base fluid. Good agreement was obtained between experimental and analytical results. Furthermore, a numerical model was developed using ANSYS commercial software to study the inclusion of semicircular baffles with nanofluid. Results suggest that MWCNT/water nanofluid at 0.3% volume fraction, along with semicircular baffles, enhanced the overall efficacy of the shell and tube heat exchanger by 15.4%, according to numerical data. Furthermore, comparisons between the proposed heat exchanger (STHX) with previous literature was also carried out. Results suggest a notable enhancement of 7% and 12.4% on heat transfer coefficient and overall efficiency was achieved compared to the previous literature. The experimentally acquired temperature variation data was utilized to create an artificial intelligence-based prognostic model. The multilayer perceptron type artificial neural network (MLP-ANN) was employed to map and forecast the thermal performance of MWCNT nanofluids on the tube side and water on the shell side. The tube side model had excellent R and R 2 values of 0.998 and 0.996, while the shell side model had R and R 2 values of 0.994 and 0.988, indicating a robust predictive model. The Kling-Gupta efficiency of the prediction model as 0.9936 and 0.9865 for tube side and shell side models, respectively, further confirms the MLP-ANN based model as an efficient prognostic model. A life cycle study was additionally performed to assess the framework's total energy usage, carbon footprint emissions, and cost over a 25-year life expectancy. The studies eventually indicated that the solar-assisted STHX is both cost-effective and environmentally beneficial.

Long-Term Performances and Technoeconomic and Environmental Assessment of Al2O3/Water and MWCNT/Oil Nanofluids in Three Solar Collector Technologies

Influence of Water Based Binary Composite Nanofluids on Thermal Performance of Solar Thermal Technologies: Sustainability Assessments

Experimental Study on the Performance of a Flat-Plate Collector Using WO3/Water Nanofluids

Improving Environmental Performance of a Direct Absorption Parabolic Trough Collector by Using Hybrid Nanofluids

An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector

Performance study of parabolic trough solar collector using hybrid nanofluids under Jordanian weather conditions

Experimental Investigation on Energy and Exergy Analysis of Solar Water Heating System Using Zinc Oxide-Based Nanofluid

Performance Characteristic Analysis of Metallic and Non-Metallic Oxide Nanofluids for a Compound Parabolic Collector: Improvement of Renewable Energy Technologies in Buildings

Effects of hybrid ZnO-WO3/water nanofluid on the performance of active solar still equipped with a heat exchanger

Exergy and energy investigations of ET-150 PTSC with non-Newtonian nanofluid

Energy, exergy, economic and environmental (4E) analysis of a parabolic trough solar collector using MXene based silicone oil nanofluids

Impact of hybrid nanofluid on thermal behavior of flat-plate solar collector: performance study

Comprehensive evaluation of flat plate and parabolic dish solar collectors’ performance using different operating fluids and MWCNT nanofluid in different climatic conditions

Evaluation of Wavy Direct Absorption Solar Collector (DASC) Performance Using Different Nanofluids

Performance characterization of a solar-powered shell and tube heat exchanger utilizing MWCNTs/water-based nanofluids: An experimental, numerical, and artificial intelligence approach

Thermal Performance Evaluation of Alumina-Water Nanofluid in an Inclined Direct Absorption Solar Collector (idasc) Using Numerical Method

Improving Thermal Energy Storage in Solar Collectors: A Study of Aluminum Oxide Nanoparticles and Flow Rate Optimization

Thermoenviroeconomic performance augmentation of solar desalination unit integrated with wick, nanofluid, and different nano-based energy storage materials

Utilization of zinc-ferrite/water hybrid nanofluids on thermal performance of a flat plate solar collector—a thermal modeling approach

Thermal growth in solar water pump using Prandtl–Eyring hybrid nanofluid: a solar energy application

A brief review and comparative evaluation of nanofluid application in solar parabolic trough and flat plate collectors