Abstract:This paper focuses on the loss estimation for the multiphase induction machine (IM) operating under fault-tolerant conditions through the field–circuit coupling finite element method (FEM). Both one-phase and two-phase open-circuit faults of a seven-phase IM are researched, and different spatial positions of the fault phases are taken into consideration. The magnitudes and phase angles of the residual phase’s current are deduced based on the principle of equal magnitude of the residual phase currents and unchanged fundamental magnetic motive force (MMF). The magnetic fields’ coupling between the fundamental and harmonic planes is analyzed. Then, the time-stepping electromagnetic fields calculation of the seven-phase IM are carried out under the commercial software Simplorer–Maxwell environment. The transient and steady performance for both the health and fault conditions are obtained based on the rotor field-oriented control (RFOC) strategy. The Joule loss and iron loss are calculated for the torque step and slope responses. The seven-phase motor driving platform is established to verify the numerical calculation results. The proposed method is effective for predicting the loss and designing a reasonable operating range for multiphase IM operating under fault-tolerant conditions considering the thermal balance.

Thermal Analysis of a Five-Phase Motor Under Faulty Operations

A Fault Tolerant Control Strategy for Dual Three-Phase PMSM under Single-Phase Open Circuit Fault Considering Inductance Asymmetry

Fault-Tolerance Performance Analysis of a Five-Phase Permanent-Magnet Linear Synchronous Machine

Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions

Fault Tolerant Control of a Multiphase Motor with Non-Sinusoidal Source under Open-Phase Conditions

Loss Investigation for Multiphase Induction Machine under Open-Circuit Fault Using Field–Circuit Coupling Finite Element Method

Fault Tolerant Control of Harmonic Injected Nine-Phase Flux Switching Permanent Magnet Motor Drive System

Fault-Tolerant Control of Five-Phase Induction Motor under Single-Phase Open

Harmonic Model and Remedy Strategy of Multiphase PM Motor under Open-Circuit Fault

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Open-circuit tolerant strategy and simulation of five-phase permanentmagnet motor

Single-phase Open-circuit Fault-tolerant Control for a Dual Five-phase Permanent Magnet Motor with Multi-operational Modes

Temperature Analysis for the Asymmetric Six-Phase Permanent Magnet Synchronous Motor in Healthy and Fault-Tolerant Modes

Post-fault operation for five-phase induction machines under single-phase open using symmetrical components

Post-fault operations of five-phase motor using a full-bridge inverter

Fault-Tolerant Control of a Five-Phase Permanent Magnet Synchronous Motor for Industry Applications

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Decoupled Modeling and Nonlinear Speed Control for Five-Phase PM Motor Under Single-Phase Open Fault

Multireference Frame Based Open-Phase Fault Modeling and Control for Asymmetrical Six-Phase Interior Permanent Magnet Motors

Fault-Tolerant Control of Dual-Three-Phase PMSM under Open-Phase Fault Based on Two-Individual Current Control

Fault-Tolerant Control Strategy Considering the Insulation Reliability of Windings for Five-Phase Induction Motors