Abstract:High-temperature processing has an irreplaceable role in many research and industrial applications. Despite remarkable development spanning over a century, the pursuit of even higher thermal flux density and more rapid thermal transients has not slowed down. As part of the ongoing energy evolution, many industrial applications are transitioning from direct combustion of fossil fuels as primary energy sources to increasing electrification, capable of adapting to renewable power grids. Thus, there is an emerging need for electrical heaters that can replace burners and supply the heat demand, especially at the highest temperatures. In this study, we report on a radiant heater design that can achieve cyclic heating/cooling rates of up to 400 K min –1 and a temperature range in excess of 1,800 K, comparable to those of commercial infrared gold image furnaces, at high surface and volumetric power densities. The heater consists of a modular unit of incandescent tungsten filament and is enclosed in an evacuated ceramic envelope, chemically inert, tolerant of thermal shock, and impervious to gasses. The material and manufacture cost of such heaters, which is estimated at ∼$0.05/W, is less than 0.03% of that for infrared gold image furnaces, which is at >$2/W. Tests of more than 10,000 demanding cycles (high temperature and high heating/cooling rate) over 350 h of total operational time and in different temperature ranges confirm the robust performance of radiant heater prototypes. The design is widely applicable to high-temperature reactor and furnace designs. In thermochemistry research and practice, these radiant heaters could offer multiple benefits compared to solar simulators, lasers, infrared gold furnaces, ceramic heaters, or direct concentration of solar input.

Optimized High-Temperature Irradiation-Resistant Thermocouple for Fast-Response Measurements

Multi-Doped Zirconia Ceramic Probe for Fiber-Optic Contact Measurement of Ultra-High Temperatures in Oxidative Atmosphere

A Performance Assessment of Current Formulations of Bare-Wire and Mineral-Insulated-Metal-Sheathed Type N Thermocouples

A study of two optical fibre probe designs for use in high-temperature combustion gases

Micromachined Thermocouple for Rapid Detection of Ultrahigh Heat Flux at High Temperature

Neutronic Analysis of Ifmif High Flux Test Module for High Temperature Irradiation

Optimal design of E-type coaxial thermocouples for transient heat measurements in shock tunnels

Simulation, Fabrication, and Characteristics of High-Temperature, Quick-Response Tungsten–rhenium Thin-Film Thermocouples Probe Sensor

Low-Cost Radiant Heater for Rapid Response, High-Temperature Heating

High temperature validation of a line heat source technique for in-pile thermal conductivity determination

C-type two-thermocouple sensor design between 1000 and 1700 °C

Computational-Experimental Investigation of a Fission Thermal Probe in TREAT

High-Temperature Heat Flux Sensor Based on Tungsten–Rhenium Thin-Film Thermocouple

A High-Temperature Thermocouple Development by Additive Manufacturing: Tungsten-Nickel (W-Ni) and Molybdenum (Mo) Integration with Ceramic Structures

Thermocouple design parameters for water level monitoring in nuclear reactors

REMOTE MONITORING OF RADIATION TEST TEMPERATURE REGIME AT A HIGH-CURRENT ELECTRON ACCELERATOR

Development and Evaluation of Temperature Sensing Smart Skin for High-Temperature Measurements in Pipes

Development of Exposed Rapid Thermocouple for Internal Fluid Temperature Testing under Pressure

A newly designed actively water-cooled Langmuir probe for tokamak devices

High Temperature Thin-Film Sensor Technologies For Advanced Propulsion Materials

Local temperature measurements on nanoscale materials using a movable nanothermocouple assembled in a transmission electron microscope.