Abstract:The chemical structure of the surface of glass fibers, including silanized fibers, was studied. Highly efficient heat-resistant composites were obtained by impregnating silanized glass fiber with a polysulfone solution, and the effect of modification of the surface of glass fibers on the physical, mechanical and thermophysical properties of the composite materials was studied. As a result of the study, it was found that the fiber-to-polymer ratio of 70/30 wt.% showed the best mechanical properties for composites reinforced with pre-heat-treated and silanized glass fibers. It has been established that the chemical treatment of the glass fibers with silanes makes it possible to increase the mechanical properties by 1.5 times compared to composites reinforced with initial fibers. It was found that the use of silane coupling agents made it possible to increase the thermal stability of the composites. Mechanisms that improve the interfacial interaction between the glass fibers and the polymer matrix have been identified. It has been shown that an increase in adhesion occurs both due to the uniform distribution of the polymer on the surface of the glass fibers and due to the improved wettability of the fibers by the polymer. An interpenetrating network was formed in the interfacial region, providing a chemical bond between the functional groups on the surface of the glass fiber and the polymer matrix, which was formed as a result of treating the glass fiber surface with silanes, It has been shown that when treated with aminopropyltriethoxysilane, significant functional unprotonated amino groups NH+/NH2+ are formed on the surface of the fibers; such free amino groups, oriented in the direction from the fiber surface, form strong bonds with the matrix polymer. Based on experimental data, the chemical structure of the polymer/glass fiber interface was identified.

Synthesis of Poly(acrylic Acid Dodecyl Ester-Styrene-Maleic Anhydride) Terpolymer and Surface Modification of Glass Fiber

A novel styrene/maleic anhydride copolymer for polymer modification by SC CO2

Synthesis of Hydroxyl-Terminated Poly(n-Butylacrylate)-Block-Polystyrene and Its Effect on the Interface-Properties of Glass-Fiber/Polymer Composites

Surface modification of poly(vinyl alcohol) fibers to control the fiber-matrix interaction in composites

Study on Surface Modification of Glass Bead by a Block Copolymer Coupling Agent

Controlled Architecture of Glass Fiber/Poly(Glycidyl Methacrylate) Composites Via Surface-Initiated Icar Atrp Mediated by Mussel Inspired Polydopamine Chemistry

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

Functional polymer coating on glass-fiber fabric for de-emulsification and coalescence of water-in-oil emulsion

Novel Route to Control Interfacial Properties of Glass Fiber-Reinforced Polystyrene Composites Via A Photo-Cross-Linkable Block Copolymer Coupling Agent

Synthesis, Characterization And Properties Of A Reactive Thermotropic Liquid Crystalline Polymer

Surface Hydrophilizing Modification of Polytetrafluoroethylene/glass Fiber Fabric Through Oxidant-Induced Polydopamine Deposition

Surface Modification of PET Fiber with Hybrid Coating and Its Effect on the Properties of PP Composites.

Preparation and Characterization of Silicone-Grafted Styrene-Butyl Acrylate Latex Copolymer

Chemical Modification And Surface Reactions On Carbon Fibers Studied By Sers

Preparation and Characterization of Methoxy Polyethylene Glycolmethacrylate Modified Styrene-acrylic Emulsion

Effect of Surface Treatment of Glass Fibres on Adhesion to Polypropylene Resin

Surface Treatment Effect on the Mechanical and Thermal Behavior of the Glass Fabric Reinforced Polysulfone

Synthesis of N-Phenylmaleimide/Styrene/Alpha Methyl Styrene/Maleic Anhydride Tetrapolymers and Its Modification to ABS Resin

Preparation and Surface Properties of Fluorinated Acrylates Copolymers

Hydrophilic Surface Modification of Poly(Methyl Methacrylate)/Poly(Methyl Methacrylate‐Co‐Acrylic Acid) Composite Film by Surface Activation

Synthesis and Characterization of Linear Low Density Polyethylene Grafted Glycerol Monolauric Acid Monoitaconic Acid Diester