Abstract:The chemical structure of the surface of glass fibers, including silanized fibers, was studied. Highly efficient heat-resistant composites were obtained by impregnating silanized glass fiber with a polysulfone solution, and the effect of modification of the surface of glass fibers on the physical, mechanical and thermophysical properties of the composite materials was studied. As a result of the study, it was found that the fiber-to-polymer ratio of 70/30 wt.% showed the best mechanical properties for composites reinforced with pre-heat-treated and silanized glass fibers. It has been established that the chemical treatment of the glass fibers with silanes makes it possible to increase the mechanical properties by 1.5 times compared to composites reinforced with initial fibers. It was found that the use of silane coupling agents made it possible to increase the thermal stability of the composites. Mechanisms that improve the interfacial interaction between the glass fibers and the polymer matrix have been identified. It has been shown that an increase in adhesion occurs both due to the uniform distribution of the polymer on the surface of the glass fibers and due to the improved wettability of the fibers by the polymer. An interpenetrating network was formed in the interfacial region, providing a chemical bond between the functional groups on the surface of the glass fiber and the polymer matrix, which was formed as a result of treating the glass fiber surface with silanes, It has been shown that when treated with aminopropyltriethoxysilane, significant functional unprotonated amino groups NH+/NH2+ are formed on the surface of the fibers; such free amino groups, oriented in the direction from the fiber surface, form strong bonds with the matrix polymer. Based on experimental data, the chemical structure of the polymer/glass fiber interface was identified.

What problem does this paper attempt to address?

### Problems the paper attempts to solve This paper aims to explore the effects of glass fiber surface treatment on the mechanical and thermal properties of polysulfone (PSU) composites. Specifically, the research objectives include: 1. **Improve the mechanical properties of composites**: - Research shows that by using a silane coupling agent to treat the glass fiber surface, the mechanical properties of the composites can be significantly improved. In particular, when the fiber - to - polymer ratio is 70/30 wt.%, the composites exhibit the best mechanical properties. - The silane - treated glass fibers increase the mechanical properties of the composites by 1.5 times compared to the untreated original fibers. 2. **Enhance the thermal stability of composites**: - It has been found that using a silane coupling agent can improve the thermal stability of the composites. This is because the silane treatment improves the interfacial interaction between the glass fiber and the polymer matrix. 3. **Improve the interfacial interaction**: - Silane treatment not only strengthens the chemical bonding between the glass fiber and the polymer matrix but also provides better interfacial adhesion by forming an interpenetrating network structure. - The research points out that after treatment with aminopropyltriethoxysilane, a large number of unprotonated amino functional groups (NH+/NH₂⁺) are formed on the glass fiber surface, and these functional groups can form strong bonds with the polymer matrix. 4. **Optimize the preparation process of composites**: - The research adopts the solution impregnation method to prepare composites and studies the effects of different fiber contents (50/50, 60/40, and 70/30 wt.%) on the properties of the composites. - The results show that as the fiber content increases, the mechanical and thermomechanical properties of the composites are significantly improved. ### Summary The core problem of this paper is to develop high - performance composites with higher mechanical strength and thermal stability by studying the effects of glass fiber surface treatment (especially silane treatment) on the mechanical and thermal properties of polysulfone composites. The research results show that silane treatment significantly improves the mechanical properties and thermal stability of the composites, especially when the fiber - to - polymer ratio is 70/30 wt.%.

Surface Treatment Effect on the Mechanical and Thermal Behavior of the Glass Fabric Reinforced Polysulfone

Effects Of Surface Modification Of Self-Healing Poly(Melamine-Urea-Formaldehyde) Microcapsules On The Properties Of Unsaturated Polyester Composites

The Study of the Glass Fiber Surface Treatment Effect on the Base Strength Characteristics of the Composite Material

Enhanced interfacial and mechanical properties of glass fabric/epoxy composites via grafting silanized carbon nanotubes onto the fibers

Effects of Different Surface Treatments of Woven Glass Fibers on Mechanical Properties of an Acrylic Denture Base Material

Effects of Silica Surface Treatment on the Impregnation Process of Silica Fiber/phenolics Composites

Effects of glass fiber reinforcing and thermal post‐treatment on the mechanical properties and crystallization behaviors of polyoxymethylene

Effect of Surface Treatment of Glass Fibres on Adhesion to Polypropylene Resin

The effect of simultaneous fiber surface treatment and matrix modification on mechanical properties of unidirectional ultra-high molecular weight polyethylene fiber/epoxy/nanoclay nanocomposites

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

Structure and Properties of Polysulfone Filled with Modified Twill Weave Carbon Fabrics

Surface modification of polyimide fibers for high-performance composite by using oxygen plasma and silane coupling agent treatment

Effect of moisture content and carbon fiber surface treatments on the interfacial shear strength of a thermoplastic-modified epoxy resin composites

Surface treatment of glass fiber and carbon fiber posts: SEM characterization

Structure, Mechanical and Thermal Properties of Polyphenylene Sulfide and Polysulfone Impregnated Carbon Fiber Composites

Enhancing the mechanical properties of fiber metal laminate by surface treatment

Processing of Functionalized and Pristine Carbon Nanotube Epoxy Composites with Silane-Treated Glass Fiber

Mechanical, morphological and wear resistance of natural fiber / glass fiber-based polymer composites

Combined effects of interface modification and micro-filler reinforcements on the thermal and tribological performances of fabric composites

Investigation of Thermal Properties of Zr-Based Metallic Glass–Polymer Composite with the Addition of Silane

Effectiveness of oil palm fiber and surface treatments on the mechanical, thermal, morphological, and water absorption properties of wheat gluten composites