Abstract:This paper proposes a dual-core photonic crystal fiber (PCF) refractive index sensor. And we use the full vector finite element method (FEM) under the anisotropic perfect matching layer (PML) boundary condition to study the effects of various parameters of the sensor on performances. By two airholes which filled with the liquid to be analyzed, the two cores coupled with each other, the refractive index range is 1.36–1.44. Numerical calculations were carried out on the sensor characteristics. The simulation results show that: when the refractive index range is 1.36–1.42, the average sensitivity can be up to 10,315 nm/RIU (refractive index unit), the highest sensitivity can be up to 13,502 nm/RIU when the liquid refractive index is 1.42, the quadratic fitting coefficient R12\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$${R}_{1}^{2}$$\end{document} = 0.99969. And when the refractive index range is 1.42–1.44, the average sensitivity can be up to 17,980 nm/RIU, the highest sensitivity can be up to 22,380 nm/RIU when the liquid refractive index is 1.44, the quadratic fitting coefficient R22\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$${R}_{2}^{2}$$\end{document} = 0.99999. The sensor we proposed is suitable for biomolecules and chemistry, as its conventional wide detection range with high sensitivity. Most importantly, a new idea of broadening the detection range is put forward for reference.

Design of a highly sensitive photonic crystal waveguide platform for refractive index based biosensing

Photonic crystal-based optical biosensor: a brief investigation

Analysis and Design of Refractive Index Biosensors Based on Single Silicon Nanobeam Cavity

Study of Photonic Crystal Cavities for Biosensors

Ultracompact refractive index sensor based on microcavity in the sandwiched photonic crystal waveguide structure

Photonic Nano Dielectric Crystal Cavity with Infiltrated Biosamples for Refractive Index Sensing Application

High-sensitivity Silicon-Based Photonic Crystal Refractive Index Biosensor Based on Defect-Mode Coupling

Refractive Index Sensor with High Sensitivity Based on Circular Photonic Crystal.

Design of a High Q-Factor Label-Free Optical Biosensor Based on a Photonic Crystal Coupled Cavity Waveguide

Hybrid lattice shaped dual polarized highly sensitive surface plasmon resonance based refractive index sensor

1D porous silicon photonic crystals comprising Tamm/Fano resonance as high performing optical sensors

Single Air-Mode Resonance Photonic Crystal Nanofiber Cavity for Ultra-High Sensitivity Refractive Index Sensing

Localized Refractive index sensing by integrated photonic crystal waveguide with edge-cavity

Design of a nanoscale gold-coated photonic crystal fiber biosensor

Silicon-on-Insulator Ring-Shaped Photonic Crystal Waveguides for Refractive Index Sensing

A High-Q, High-Sensitivity Refractive Index Sensor Based on Abundant Defective Modes of a 12-Fold Quasiperiodic Photonic Crystal

Label-free Biosensing Using a Photonic Crystal Structure in a Total-Internal-reflection Geometry

High sensitivity with wide detection range refractive index sensor based on dual-core photonic crystal fiber

Suspended Slotted Photonic Crystal Cavities for High-Sensitivity Refractive Index Sensing

Periodic stub implementation with plasmonic waveguide as a slow-wave coupled cavity for optical refractive index sensing

Multiple Fano resonator based on photonic crystal waveguide coupled with two micro-cavities for biomedical sensing application