Abstract:The exceptional performance of the silicon sensors in the radiation environment has led to their extensive application in high energy physics. Even so, the future experiments foresee these sensors to be exposed to higher radiation levels. Radiation induces a change in the macroscopic properties of the sensor, thus, severely affecting the sensor performance and ultimately becoming the limiting factor for its operation. With an aim to extend the radiation hardness capabilities of the silicon sensors for the future experiments there has been a growing interest in sensors with novel designs and unique characteristic of intrinsic charge multiplication. However, it is important to understand the effect of radiation damage on these sensors, before employing them in the main detector system. The RD50 collaboration extensively employs TCAD simulation tools for an in-depth understanding and structural optimization of the newly proposed sensor technologies, complementing the measurement results. The simulation package, by the finite element method, solves the Poisson equation coupled with the current continuity equations in the main device, typically with the drift-diffusion current model. There is also the possibility of co-simulating an electronic circuit connected to the main device using the incorporated SPICE package, for example to predict single event effects or read-out related waveforms. The simulation tools also provide an insight into the sensor operation both in the non-irradiated and the irradiated scenario in order to predict the voltage dependence of the leakage current, charge collection and electrical field distribution as function of irradiation. This has required the development of a radiation damage model within the simulation tools such that the measurements are well reproduced. The details of the radiation damage modelling using two commercial TCAD tools Silvaco and Synopsys, are discussed in this work.

Radiation hardening and sensors for radioactive environments

Overview of radiation hardening techniques for IC design

Adaptive wireless sensor for aerospace application

Total-Ionizing-Dose Tolerance Analysis of a Radiation-Hardened Image Sensor

Radiation Effects and Radiation Hardening Technology of New Microsystems

Radiation damage effects on detectors and eletronic devices in harsh radiation environment

Low-power electronic technologies for harsh radiation environments

Radiation Damage Modelling: TCAD Simulation

Radiation Risks and Mitigation in Electronic Systems

Overview on Radiation Damage Effects and Protection Techniques in Microelectronic Devices

Integrated Circuit Design for Radiation-Hardened Charge-Sensitive Amplifier Survived up to 2 Mrad

Analyzing the Radiation Degradation of 4-Transistor Deep Submicron Technology CMOS Image Sensors

Semiconductor materials and radiation detection

A Radiation-Hardened CMOS Image Sensor With Pixels Exhibiting a Negligibly Small Dark-Level Increase During Ionizing Radiation

Radiation tolerant, thin, passive CMOS sensors read out with the RD53A chip

Radiation-Induced Dose and Single Event Effects in Digital CMOS Image Sensors

Simulation Test Technique for Nuclear and Space Radiation Effects

Overview of Ionizing Radiation Effects in Image Sensors Fabricated in a Deep-Submicrometer CMOS Imaging Technology

Radiation hardness of GaAs: Cr and Si sensors irradiated by electron beam