Abstract:A full lithium-ion battery cell has been assembled based on nanoarchitectured ternary manganese–nickel–cobalt compounds, in which multi-shell spherical Mn0.54Ni0.13Co0.13(CO3)0.8 serves as the anode and the subsequently lithiated Li-excess Li[Li0.2Mn0.54Ni0.13Co0.13]O2 with a yolk–shell structure acts as the cathode. The performance of a lithium-ion full battery significantly relies on the electrochemical properties of both anode and cathode materials. A multi-shell carbonate anode is first tested in a half battery cell with metallic lithium as the counter electrode, revealing an unexpectedly high initial charge capacity of 1173.1 mA h g−1 at a specific current of 25 mA g−1, which is two times higher than its theoretical capacity. Moreover, when cycled at 250 mA g−1 for 100 electrochemical cycles, this carbonate anode retains a final specific capacity of 434.6 mA h g−1. Accordingly, a yolk–shell-structured Li-excess layered cathode material has been facilely obtained through lithiation of carbonate compounds, showing an initial discharge capacity of 250.7 mA h g−1 when cycled at 0.1 C (1 C = 250 mA g−1) in a half battery cell. Furthermore, this cathode retains a final capacity of 156.3 mA h g−1 at 1 C after 100 cycles and exhibits an outstanding capacity retention of 90.3%. Such remarkable electrochemical properties of carbonate anode and Li-excess oxide cathode materials are attributed to their nanoarchitectures resulting from the water-based solvothermal process, i.e., multi-shell and yolk–shell structures composed of numerous primary nanoparticles, in comparison with mediocre performances from monodispersive carbonate microspheres and Li-excess oxide nanoparticles synthesized via an ethylene-glycol-based solvothermal method. Combination of the nanostructured ternary transition metal carbonate anode and the Li-excess layered cathode into a full lithium-ion battery results in a remarkable specific capacity above 250 mA h g−1 at 0.1 C in the voltage range of 0.1–4.0 V, which demonstrates the application as a very promising electrochemical device for future energy conversion and storage.

An Advanced Lithium Ion Battery Based on Amorphous Silicon Film Anode and Integrated xLi2MnO3.(1-x)LiNiyMnzCo1-y-zO2 Cathode

Cobalt-free cathodes and silicon thin-film anodes towards high-capacity solid-state batteries

Hierarchical Design in LiMn 2 O 4 Particles for Advanced Hybrid Aqueous Batteries

Fabrication and Performance of High Energy Li-Ion Battery Based on the Spherical Li[Li0.2Ni0.16Co0.1Mn0.54]O2 Cathode and Si Anode

A High‐Performance Lithium Metal Battery with Ion‐Selective Nanofluidic Transport in a Conjugated Microporous Polymer Protective Layer

Carbon-Coated Li3 VO4 Spheres As Constituents of an Advanced Anode Material for High-Rate Long-Life Lithium-Ion Batteries.

Challenges and Recent Progress on Silicon‐Based Anode Materials for Next‐Generation Lithium‐Ion Batteries

Hollow Structured Silicon Anodes with Stabilized Solid Electrolyte Interphase Film for Lithium-Ion Batteries

High-performance Self-Organized Si Nanocomposite Anode for Lithium-Ion Batteries

A Novel Anode in High-Performance Lithium-Ion Battery Based on Advanced Nanomaterials and Nanofabrication Technology

A 3D Framework with Li3N-Li2S Solid Electrolyte Interphase and Fast Ion Transfer Channels for a Stabilized Lithium-Metal Anode

A New, High Energy Rechargeable Lithium Ion Battery with a Surface-Treated Li1.2Mn0.54Ni0.13Co0.13O2 Cathode and a Nano-Structured Li4Ti5O12 Anode

Nanostructure designing and hybridizing of high-capacity silicon-based anode for lithium-ion batteries

Micron SiOx Encapsulated into Amorphous B, N Co-doped Carbon Nanotube Network for High-Capacity and Long-Durable Li-ion Half/full Batteries

Enhanced Lithium Storage Performance: Dual-Modified Electrospun Si@MnO@CNFs Composites for Advanced Anodes

Encapsulating Micro-Nano Si/SiO(x) into Conjugated Nitrogen-Doped Carbon As Binder-Free Monolithic Anodes for Advanced Lithium Ion Batteries.

Efficient Ionic Conductor Anode Materials with Heterojunction Structure of MnOx/Si@C Utilized in Lithium‐Ion Batteries

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

High-capacity full lithium-ion cells based on nanoarchitectured ternary manganese–nickel–cobalt carbonate and its lithiated derivative

Interface Engineering of Silicon and Carbon by Forming a Graded Protective Sheath for High-Capacity and Long-Durable Lithium-Ion Batteries