Abstract:We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while keeping a nearly stoichiometric composition of Ti(1-x)N(x) (x=0.5), the film resistivity increases, the dominant crystal orientation changes from (100) to (111), grain boundaries become clearer, and the strong compressive strain changes to weak tensile strain. The TiN films absorb a high concentration of contaminants including hydrogen, carbon, and oxygen when they are exposed to air after deposition. With the target-substrate distance set to 88 mm the contaminant levels increase from ~0.1% to ~10% as the pressure is increased from 2 to 9 mTorr. The contaminant concentrations also correlate with in-plane distance from the center of the substrate and increase by roughly two orders of magnitude as the target-substrate distance is increased from 88 mm to 266 mm. These contaminants are found to strongly influence the properties of TiN films. For instance, the resistivity of stoichiometric films increases by around a factor of 5 as the oxygen content increases from 0.1% to 11%. These results suggest that the sputtered TiN particle energy is critical in determining the TiN film properties, and that it is important to control this energy to obtain high-quality TiN films. Superconducting coplanar waveguide resonators made from a series of nearly stoichiometric films grown at pressures from 2 mTorr to 7 mTorr show an increase in intrinsic quality factor from ~10^4 to ~10^6 as the magnitude of the compressive strain decreases from nearly 3800 MPa to approximately 150 MPa and the oxygen content increases from 0.1% to 8%. The films with a higher oxygen content exhibit lower loss, but the nonuniformity of the oxygen incorporation hinders the use of sputtered TiN in larger circuits.

Conduction and electric field effect in ultra-thin TiN films

Effect of thickness on metal-to-semiconductor transition in 2-dimensional TiN thin films

Pressure Tuning of Superconductivity in TiN Thin Films

Structural and Hydrophilic Properties of TiN Films Prepared by Ultrasonic Atomization Assisted Spray Method under Low Temperature

Superconductivity on the localization threshold and magnetic-field-tuned superconductor-insulator transition in TiN films

Penetration depth and critical fields in superconducting NbTi thin films grown by co-sputtering at room temperature

Superconducting TiN Films Sputtered Over a Large Range of Substrate DC Bias

Microwave Properties of Superconducting Atomic-Layer Deposited TiN Films

Microstructural and Electrical Resistivity of TiN Electrode Films Prepared by Direct Current (DC) Reactive Magnetron Sputtering

Effects of Ti on N Distribution and Diffusion in FeTiN Thin Films

Effects of Mn doping on conduction mechanism and dielectric nonlinearity of Na 0.5 Bi 0.5 TiO 3 thin film

Mechanics and Electricity Properties of Cu/Ti Thin Film

Natural width of the superconducting transition in epitaxial TiN films

Superconducting TiN films grown by directional reactive evaporation

Film thickness effect on texture and residual stress sign transition in sputtered TiN thin films

Sputtered TiN films for superconducting coplanar waveguide resonators

The Effect of Deposition Temperature on TiN Thin Films for the Electrode Layer of 3D Capacitors Prepared by Atomic Layer Deposition

Optical Properties of TiN Thin Films close to the Superconductor-Insulator Transition

Hydrostatic Pressure Effect on the Transport Properties in TiO Superconducting Thin Films

Physical properties revealed by transport measurements on superconducting Nd$_{0.8}$Sr$_{0.2}$NiO$_{2}$ thin films