Abstract:There has been a growing interest in ultra-high purity, low-background NaI(Tl) crystals for dark matter direct searches. Past research indicates that zone refining is an efficient and scalable way to purify NaI. In particular, K and Rb -- two elements with radioisotopes that can cause scintillation backgrounds -- can be efficiently removed by zone refining. However, zone refining has never been demonstrated for ultra-high purity NaI which became commercially available recently. In this article, we show that many common metallic impurities can be efficiently removed via zone refining. A numerical model for predicting the final impurity distribution was developed and used to fit the ICP-MS measurement data to determine the segregation coefficient and the initial concentration. Under this scheme, the segregation coefficient for K is estimated to be 0.57, indicating that zone refining is still effective in removing K from ultra-high purity NaI. As zone refining tends to move the impurities to one end, elements with concentrations too low to be measured directly in the unprocessed powder can potentially be detected in the end due to the enrichment. We also present an analysis technique to estimate the initial concentrations of impurities with partial data, which effectively enhances the sensitivity of the spectrometer. Using this technique, the initial concentration of $^{85}$Rb is estimated to be between 5 ppt and 14 ppt at 90% CL, at least 14 times lower than the detection limit of ICP-MS and 7 times lower than the current most stringent limit set by the DAMA collaboration by direct counting of radioactive $^{87}$Rb. These results imply that zone refining is a key technique in developing next-generation, NaI-based crystal scintillators for dark matter direct detection.

Production of high-purity Cd, Zn, and Te by multistage vacuum distillation

Preparation of 6N5 (99.99995%-Pure) Cadmium, Zinc, and Tellurium by Crystallization Methods

Separation behavior of trace impurities during deep purification of zone-fused germanium tailings via vacuum distillation

A review of preparing high-purity metals by vacuum distillation

The Separation Behavior of Impurities in the Purification of High-Purity Magnesium via Vacuum Distillation

A clean and short process for the preparation of refined indium and investigation of migration distribution pattern of impurities thallium and tin via vacuum distillation

Technical research on vacuum distillation to purify magnesium to 99.99% purity

Development of travelling heater method for growth of detector grade CdZnTe single crystals

Purification of yttrium to 4N5+ purity

Preparation of High Purity Cadmium by Vacuum Distillation and Zone-melting Method.

Preparation of High-Purity Magnesium from Electrolytically Produced Crude Magnesium via Vacuum Distillation

One-step preparation of high purity magnesium by vacuum distillation technology

Research on the Removal of Impurity Elements During Ultra-High Purification Process of Terbium

Zone refining of ultra-high purity sodium iodide for low-background detectors

Growth of High Purity CdTe Single Crystals by Vertical Zone Melting

Study on the Polycrystalline Synthesis Method for High Purity CdSe Compound

Measurement and effect of volatilization kinetic parameters in the production of high-purity zinc by vacuum distillation

A Study on the Removal of Impurity Elements Silicon and Zinc from Rubidium Chloride by Vacuum Distillation

Preparation and investigation of high purity Ge–Te–AgI glasses for optical application

Separation of Lead Sulfide from Galena Concentrate Via Two-Step Vacuum Distillation

Analysis of High-Purity Germanium Dioxide by Inductively Coupled Plasma Atomic Emission Spectrometry with Reaction Distillation of the Matrix