Abstract:Low Speed Pre-Ignition (LSPI), also referred to as superknock or mega-knock is an undesirable turbocharged engine combustion phenomenon limiting fuel economy, drivability, emissions and durability performance. Numerous researchers have previously reported that the frequency of Superknock is sensitive to engine oil and fuel composition as well as engine conditions in controlled laboratory and engine-based studies. Recent studies by Toyota and Tsinghua University have demonstrated that controlled induction of particles into the combustion chamber can induce pre-ignition and superknock. Afton and Tsinghua recently developed a multi-physics approach which was able to realistically model all of the elementary processes known to be involved in deposit induced pre-ignition. The approach was able to successfully simulate deposit induced pre-ignition at conditions where the phenomenon has been experimentally observed. This approach allowed characterization of the impact of particle characteristics, bulk charge properties and engine conditions and provided valuable insight into behavior observed in engine and bench tests. The objective of this study is to develop a conceptual model for deposit-induced pre-ignition based on first principles, and to provide the industry a framework to help model this complex phenomenon and to help guide optimization of engine design, control and fuel and lubricant compositions for real world LSPI suppression. In this work, multi-physics simulations were conducted that incorporated accurate representation of heat and mass transfer, particle oxidation and gas-phase autoignition and specific characteristics of the particle that dominate pre-ignition were identified. The study was extended to simulate the effect of bulk charge properties and engine conditions on pre-ignition. The results show that pre-ignition timing, and therefore superknock, is particularly sensitive to key deposit characteristics and engine operating conditions, consistent with results of experimental studies that have been reported in literature. The results of this study help elucidate the phenomenon of deposit induced pre-ignition that has been reported but is not well understood. Furthermore, the results of this study will aid the industry in development of improved fluid formulations and engine design that are needed to suppress superknock in real-world turbocharged engines.

Characterization of knock intensity distributions: Part 1: statistical independence and scalar measures

Knock Intensity Distribution and a Stochastic Control Framework for Knock Control

Statistical Quantification of Knock With Spark Ignition and Pre-Chamber Jet Ignition in a Light Duty Gasoline Engine

Beta-Distribution-Based Knock Probability Estimation, Control Scheme, and Experimental Validation for SI Engines

Numerical modeling of knocking combustion in spark ignition engines

Progress in knock combustion modeling of spark ignition engines

Implementation and Parameter Analysis of the Knock Phenomenon of a Marine Dual-Fuel Engine Based on a Two-Zone Combustion Model

Study on Knocking Intensity under In-Cylinder Flow Field in SI Engines Using a Rapid Compression Machine

Automatic Knock Control System

An exploratory study of knock intensity in a large-bore heavy-duty methanol engine

Comparative Knock Analysis of HCNG Fueled Spark Ignition Engine Using Different Heat Transfer Models and Prediction of Knock Intensity by Artificial Neural Network Fitting Tool

Effects of injection strategy on the knocking behavior of a pilot ignited direct injection natural gas engine

Characterizing the Multiscale Knock Energy of the in-Cylinder Pressure of Compound Combustion Engines Fueled with Dimethyl Ether

Pressure Oscillation and Chemical Kinetics Coupling During Knock Processes in Gasoline Engine Combustion

An experimental study of knock analysis of HCNG fueled SI engine by different methods and prediction of knock intensity by particle swarm optimization-support vector machine

Impact of Particle Characteristics and Engine Conditions on Deposit-Induced Pre-Ignition and Superknock in Turbocharged Gasoline Engines

Knock Recognition of Knock Sensor Signal Based on Wavelet Transform and Variational Mode Decomposition Algorithm

Effect of Temperature Disturbance on End-Gas Autoignition and Detonation Development

Experimental Investigation on Knock Characteristics from Pre-chamber Gas Engine Fueled by Hydrogen

Knock Prediction Improvement with Application to the Analysis of Knock Mitigation with Targeted Water Injection in SI Engines

Numerical Modeling of the Propagating Flame and Knock Occurrence in Spark-Ignition Engines