Abstract:Transformation induced plasticity (TRIP) is an effect common to several classes of advanced high strength steels (AHSS) with promising automotive applications. This effect is characterized by the transformation of retained austenite (RA) to martensite, resulting in increased hardening, increased fracture resistance, and improved formability. Accurate thermo-mechanical modeling over a range of strain-rates and temperatures is critical to fully utilize the improved performance of AHSS exhibiting the TRIP effect. In this work, a novel thermodynamically consistent rate-dependent crystal plasticity formulation is developed, which incorporates strain-rate and temperature dependent strain-induced martensitic transformation. Thermodynamic arguments are used to derive plastic slip and transformation driving forces accounting for various physical mechanisms (e.g. applied stress, temperature, crystal orientation, stored dislocation energy), as well as a constitutive law governing temperature evolution. RA and transformed martensite mechanical thermo-elasto-viscoplastic behavior is explicitly modeled, and a modified Taylor homogenization law is proposed to determine strain partitioning while accounting for transformation. The model is then calibrated and validated for a QP3Mn alloy over a large range of temperatures ( -10 °C – 70 °C ) and strain-rates ( 5 × 10 -4 s −1 – 200 s −1 ). The evolution of the Taylor–Quinney coefficient and the orientation dependence of transformation are found to match well with trends in literature. The fully calibrated model is compared to a model recalibrated without strain-rate dependent transformation, demonstrating that capturing strain-rate dependent transformation may be necessary even for materials where no direct experimental strain-rate dependence. Plane strain and equibiaxial tension simulations are conducted using the calibrated model, showing that increasing triaxiality results in increased transformation. An extension to the calibrated model is proposed for materials which do not match the predicted trend.

Modeling of the Kinetics of Strain‐Induced Martensite Transformation and the Transformation‐Induced Plasticity Effect in a Lean‐Alloyed Metastable Austenitic Stainless Steel

Role of Strain-Induced Martensitic Phase Transformation in Mechanical Response of 304L Steel at Different Strain-Rates and Temperatures

Strain‐Induced Martensitic Transformation and the Mechanism of Wear and Rolling Contact Fatigue of AISI 301LN Metastable Austenitic Stainless Steel

Ductility and strain-induced transformation in a high-strength transformation-induced plasticity-aided dual-phase steel

Modeling the Tensile Strain Hardening Behavior of a Metastable AISI 301LN Austenitic Stainless Steel Pre-strained in Compression

Influence of the martensitic transformation on the deformation behaviour of an AISI 316 stainless steel at low temperatures

Martensitic transformation and stress-strain relations of shape-memory alloys

Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part I. Magnetic Measurements and Mechanical Behavior

Analysis of Martensitic Transformation Plasticity Under Various Loadings in a Low-Carbon Steel: An Elastoplastic Phase Field Study

Dilatometric Analysis and Kinetics Research of Martensitic Transformation under a Temperature Gradient and Stress

Plasticity modeling for a metastable austenitic stainless steel with strain-induced martensitic transformation under cyclic loading conditions

The Investigation of Strain-Induced Martensite Reverse Transformation in AISI 304 Austenitic Stainless Steel

Influence of phase transformations on the mechanical properties of austenitic stainless steels

Modeling the kinetics of deformation-induced martensitic transformation in AISI 316 metastable austenitic stainless steel

A data-driven approach to model the martensitic transformation temperature in strain-induced metastable austenitic steels

Investigations on austenite stability and martensitic transformation kinetics of a medium Mn steel under different strain states

RESEARCH ON FORMING TEMPERATURE OF METASTABLE AUSTENITIC STAINLESS STEEL HEAD BASED ON STRAIN-INDUCED MARTENSITIC TRANSFORMATION

Phase-based constitutive modeling and experimental study for dynamic mechanical behavior of martensitic stainless steel under high strain rate in a thermal cycle

Measurement and Modeling of Deformation-Induced Martensitic Transformation in a Metastable Austenitic Stainless Steel under Cyclic Loadings

A novel crystal plasticity model incorporating transformation induced plasticity for a wide range of strain rates and temperatures

Deformation-induced martensite in austenitic stainless steels: A review