Abstract:Thin-ply composite failure modes also significantly differ from conventional ply composite failure modes, with the final failure mechanism switching from irregular progressive failure to direct fracture characterized by a uniform fracture with the reduction of the ply thickness. When open holes and bolt joints are involved, thin-ply-laminated composites exhibit more complex stress states, damage evolution, and failure modes. Compared to the experimental study of thin-ply-laminated composite-bolted joints, there are few reports about numerical analysis. In order to understand the damage evolution and failure mechanism of thin-ply-laminated composites jointed by single-lap bolt, a progressive damage model based on three-dimensional (3D) LaRC failure criterion combined with cohesive element is constructed. Through an energy-based damage evolution method, this model can capture some significant mechanical characteristics in thin-ply-laminated structures, such as the in situ effect, delamination inhibition, and fiber compressive kinking failure. The comparisons between the numerical predictions and experimental observations are made to verify the accuracy of the proposed model. It is found that the predicted stress-displacement curves, failure modes, damage morphologies, etc., are consistent with the experimental results, indicating that the presented progressive damage analysis method displays excellent accuracy. The predicted stress at the onset of delamination is 50% higher than that of the conventional thick materials, which is also consistent with experimental results. Moreover, the numerical model provides evidence that the microstructure of thin-ply-laminated composite performs better in uniformity, which is more conducive to inhibiting the intra-layer damage and the expansion of delamination damage between layers. This study on the damage inhibition mechanism of thin-ply provides a potential analytical tool for evaluating damage tolerance and bearing capabilities in thin-ply-laminated composite-bolted joints.

Numerical Prediction of Damage Interaction during L-Shaped Laminated Composite Structures Unfolding

Status of Numerical Simulation Methods for Delamination Damage of Composite Laminates

Predicting delamination in composite structures

Application of a delamination model to laminated composite structures

Numerical Prediction of Compressive Residual Strengths of a Quasi-Isotropic Laminate with Low-Velocity Impact Delamination

Exploration of Several Influence Factors of Low-Velocity Impact Damage on Composite Laminates

Analysis of Residual Compressive Strength of Composite Laminates with Delamination

Delamination prediction in composite laminates under low-velocity impact

Continuum damage mechanics based failure prediction and damage assessment in laminated composite structures

Delamination Propagation and Compressive Strength Prediction of Laminated Composite

On the Distribution of Delamination in Composite Structures and Compressive Strength Prediction for Laminates with Embedded Delaminations

A Delamination Propagation Model for Fiber Reinforced Laminated Composite Materials

Progressive Damage Behavior of Composite L‐stiffened Structures with Initial Delamination Defects under Uniaxial Compression: Experimental and Numerical Investigations

A highly efficient prediction of delamination migration in laminated composites using the extended cohesive damage model

An Extended Analytical Model for Predicting the Compressive Failure Behaviors of Composite Laminate with an Arbitrary Elliptical Delamination

Integrated XFEM-CE Analysis of Delamination Migration in Multi-Directional Composite Laminates

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Analysis of delamination of composite laminates via extended finite element method based on the layerwise displacement theory and cohesive zone method

Modeling delamination growth in laminated composites

Prediction of Laminate Delamination from Strength Failure of Interlaminar Matrix-Layer

Influence of Failure Criteria and Intralaminar Damage Progression Numerical Models on the Prediction of the Mechanical Behavior of Composite Laminates