Abstract:The electrocoagulation process is an electrochemical technique that has demonstrated wide potential because it can be applied to wastewater from different industrial sectors considering the principles of electrolysis and coagulation. It is a low-cost method and of easy installation. Effluents with high concentrations of oils grease and chemical oxygen demand (COD) can be treated successfully obtaining high removal efficiencies. The purpose of this study was to analyze the effect of current density on the performance of oil/grease removal (OG), COD, and turbidity (NTU), as well as the pH variation and electrical conductivity during the process in batch mode. The effluent from the dairy industry with 172.6 mg OG/L, removed 70.30% OG, 75.38% COD with 76.92 A/m2 in 25 min of electrolysis. Two combinations of 2Fe-1Al and 1Fe-2Al anodes were analyzed at 68.38 A/m2, reaching removals of 74.74% and 70% of OG, respectively. Regarding the domestic kitchen effluent, the COD initial was 1,766 mg/L, and working with two Fe-anodes, the OG removal efficiencies in 15 min of electrolysis were 94.9%, 96.75%, and 96.53% with current densities of 37, 56, and 74 A/m2, respectively. The OG removal efficiencies were similar with Al-anodes. The COD removal efficiencies with Fe-anodes were 66.7%, 76.9%, and 68.7%, and with Al-anodes were 76.3%, 77.4%, and 77.5%, respectively. Both effluents were studied with an inter-electrode distance of 3 cm, and the pH in both cases varied from 7 to 8, which favors the elimination of contaminants by adsorption. The electrical conductivity did not undergo major changes, favoring the economy of the electrocoagulation process. Electrocoagulation is a low-cost electrochemical process in order to remove organic pollutants.

Determination of chemical oxygen demand for phenolic compounds from oil refinery wastewater implementing different methods

Removal of COD from real oily wastewater by electrocoagulation using a new configuration of electrodes

Study on COD removal mechanism and reaction kinetics of oilfield wastewater

Removal of Chemical Oxygen Demand from Real Petroleum Refinery Wastewater through a Hybrid Approach: Electrocoagulation and Adsorption

Cod Removal Efficiencies of Some Aromatic Compounds in Supercritical Water Oxidation

Phenol Degradation in an Electrochemical System with TiO2/activated Carbon Fiber As Electrode

Assessing the effectiveness of electrocoagulation, ozonation and Fenton's oxidation for the treatment of phenalkamine condensate: A comparative study

Process Optimization of Electrochemical Treatment of COD and Total Nitrogen Containing Wastewater

Optimisation of COD removal from the olive oil mill wastewater by combined electrocoagulation and peroxone process: modelling and determination of kinetic coefficients

Enhancement of COD Removal from Oilfield Produced Wastewater by Combination of Advanced Oxidation, Adsorption and Ultrafiltration

Assessment of electrocoagulation for the treatment of petroleum refinery wastewater

The Taguchi Approach in Studying and Optimizing the Electro-Fenton Oxidation to Reduce Organic Contaminants in Refinery Wastewater Using Novel Electrodes

Response surface methodology optimization of the effect of pH, contact time, and microbial concentration on chemical oxygen removal potential of vegetable oil industrial effluents

Extraction−Oxidation−Adsorption Process for Treatment of Effluents from Resin Industries

Performance of Electro-Fenton Process for Phenol Degradation Using Nickel Foam as a Cathode

Remediation of oil refinery wastewater implementing functionalized mesoporous materials MCM-41 in batch and continuous adsorption process

Promising Low-Cost Adsorbent from Waste Green Tea Leaves for Phenol Removal in Aqueous Solution

Ionic Liquid Agar–Alginate Beads as a Sustainable Phenol Adsorbent

Purification and detoxification of petroleum refinery wastewater by electrocoagulation process

Optimization of electro‐oxidation and electro‐Fenton techniques for the treatment of oilfield produced water

Effect of current density on COD removal efficiency for wastewater using the electrocoagulation process