Abstract:Abstract In view of the large amount of oily wastewater, the complexity of pollutant composition and the difficulty of effective treatment, the idea to adopt the microbial technology to treat it is put forward and the influencing factors of oil-degrading microbial treatment of oily wastewater.optimal degradation conditions and degradation kinetics have been studied in depth. The degradation effect and the inflluecing factors of the hydrocarbon degradation microorganism to treat the oily wastewater were investigated in this study. Firstly, the hydrocarbon degradation microorganism which can degradate the oil pollutions quickly and effectively are screened and identificated and the physiological and biochemical characteristics are detaily reaearched.. Secondly, the influencing factors and effects of oil-degrading bacteria treatment of oily wastewater and the optimal degradation conditions, which including pH value, rude oil mass concentration and the biological inoculum size are studied in depth and determined. Thirdly, the degradation kinetics characteristics of the petroleum hydrocarbon degrading stains are investigated. At last, the degradation effect of the oil pollution under the optimal condition is studied as the focus research is studied to verify the biodegradation effects of the strains in order to provide some technical reference for the practical application of this technology. The research results indicate that: (1) the Petroleum hydrocarbon degrading bacteria we screened all have good treatment effect on oily wastewater; (2) Analytical identification of morphological and physiological and biochemical characteristics indicated that both JA and JB are all Pseudomonas sp and their optimal growth times are 18-23h, and 20-21h respectively; (3) The degradation effect of the mixed strain. on the pollutants is much better than that of the single one, Under the JA to JB mixed rate of 1:2, the average degradation rate of crude oil can be increased from 23.4% of the single bacteria to 49.6% of the mixed one; (4) The most important influencing factors affecting the degradation performance of petroleum-degrading bacteria are pH value, followed by crude oil mass concentration and biological inoculum. Among them, under the condition of pH 7.15, crude oil mass concentration of 3387mg/L and biological inoculum size of 75ml/L, the mixed bacteria had the highest degradation rate of crude oil, up to 55.76%.

Response surface methodology optimization of the effect of pH, contact time, and microbial concentration on chemical oxygen removal potential of vegetable oil industrial effluents

Process optimization via response surface methodology in the physico-chemical treatment of vegetable oil refinery wastewater

Optimization of Volatile Fatty Acid Production with Co-Substrate of Food Wastes and Dewatered Excess Sludge Using Response Surface Methodology

Electrocoagulation process for oily wastewater treatment and optimization using response surface methodology

Application of Response Surface Methodology For Modeling and Optimization of A Bio Coagulation Process (Sewage Wastewater Treatment Plant)

Optimization for Removal of COD and BOD through RSM-CCD by Activated Sludge Treatment Process for Pharmaceutical Wastewater

Optimisation of COD removal from the olive oil mill wastewater by combined electrocoagulation and peroxone process: modelling and determination of kinetic coefficients

Optimization of pollutants removal from anaerobically digested dairy wastewater by electro-oxidation process: a response surface methodology modeling and validation

Application of response surface methodology for color removing from dyeing effluent using de-oiled activated algal biomass

Aspergillus niger as an efficient biological agent for separator sludge remediation: two-level factorial design for optimal fermentation

Optimization of the coagulation-flocculation process for vegetable oil refinery wastewater using a full factorial design

Optimization of electrocoagulation process parameters for the treatment of oil industry drill site wastewater

Study on COD removal mechanism and reaction kinetics of oilfield wastewater

Statistical Optimization of Crude Oil Degradation using Bacterial Consortium and their Enzymes

Performance Optimization of Chemical and Green Coagulants in Tannery Wastewater Treatment: A Response Surface Methodology Approach

Investigation of oil content removal performance in real oily wastewater treatment by electrocoagulation technology: RSM design approach

Electrochemical oxidation of palm oil mill effluent using platinum as anode: Optimization using response surface methodology

Experiment study on the treatment effect of the hydrocarbon degradation microorganism to treat the oily wastewater

Removal of COD from real oily wastewater by electrocoagulation using a new configuration of electrodes

Artificial neural network (ANN) and response surface methodology (RSM) algorithm-based improvement, kinetics and isotherm studies of electrocoagulation of oily wastewater

Optimization Based on Response Surface Methodology of Anionic Dye Desorption From Two Agricultural Solid Wastes