Abstract:One major cause of to environmental pollution is industrial dye wastewater. The main purpose of current work was synthesis and investigation of effectiveness of LDH–Ferrite–Biochar–Polymeric composites for removal of anionic dye (Acid blue 41) from wastewater. The co-precipitation technique is used to synthesize Zn–Al Layered double hydroxide-Manganese ferrite–Egg Shell biochar–Starch (Zn–Al–MnFe 2 O 4 –ESB–Sta), Cu–Al Layered double hydroxide–Cadmium ferrite–Eucalyptus bark biochar–Chitosan (Cu–Al–CdFe 2 O 4 –EBB–Cs), Cd–Al Layered double hydroxide–Cobalt ferrite–Jujube wood biochar–Sodium alginate (Cd–Al–CoFe 2 O 4 –JWB–Na–Alg), Mn–Al Layered double hydroxide–Copper ferrite–Mulberry Stem Biochar–Starch (Mn–Al–CuFe 2 O 4 –MSB–Sta) and Co–Al Layered double hydroxide–zinc ferrite-peanut shell biochar–carboxymethyl cellulose (Co–Al–ZnFe 2 O 4 –PSB–CMC). According to findings of recent studies, Zn–Al–MnFe 2 O 4 –ESB-Sta (40.1 mg/g), Cu–Al–CdFe 2 O 4 –EBB–Cs (35.6 mg/g), Cd–Al–CoFe 2 O 4 –JWB–Na–Alg (28.1 mg/g), Mn–Al–CuFe 2 O 4 –MSB-Sta (37.3 mg/g) and Co–Al–ZnFe 2 O 4 –PSB–CMC (31.2 mg/g) has adsorption capacity for acid blue 41 dye. All composites achieved maximum adsorption effectiveness in acidic range (2–5), eliminating AB-41 dye in 45 min at optimal dose 0.05 g and 150 mg/l initial dye concentration was optimum. After 30 °C, adsorption potential decreased, indicating exothermic mechanisms. The efficiency was still adequate after five cycles of regeneration. The Pseudo 2nd order Kinetics and Freundlich isotherm model were successfully implemented among the applied models. The aforementioned composites are deemed the most cost-effective, energy-efficient, ecologically friendly, and biologically renewable materials for treating wastewater containing AB-41 dye. The results indicate that Zn–Al–MnFe 2 O 4 –ESB–Sta is the most effective synthetic composite for water remediation among all others. Furthermore, it was discovered in a column study that the ideal bed height, flow rate, and inlet concentration of dye were 3 cm, 3.6 ml/min, and 50 mg/l, respectively, for achieving the highest adsorption of AB-41 dye.

Remediation of oil refinery wastewater implementing functionalized mesoporous materials MCM-41 in batch and continuous adsorption process

Integrated Photocatalytic Oxidation and Adsorption Approach for the Robust Treatment of Refinery Wastewater Using Hybrid TiO2/AC

Performance of the MCM-41-NH2 Functionalized Mesoporous Material Synthetized from the Rice Husk Ash on the Removal of the Polycyclic Aromatic Hydrocarbons

Determination of chemical oxygen demand for phenolic compounds from oil refinery wastewater implementing different methods

Removal of hydrocarbon pollutants from refinery wastewater using N-hexadecylchitosan as an efficient adsorptive platform

Adsorption performance of an amine-functionalized MCM–41 mesoporous silica nanoparticle system for ciprofloxacin removal in a batch system

Adsorption of hydrocarbon pollutants from wastewater using Cu‐ and Zn‐loaded activated carbon derived from waste tires

LDH–Ferrite–Biochar–Polymeric Composites for Enhanced Adsorption–Desorption of Acid Blue 41 and Real Textile Wastewater Purification: A Batch and Column Study

Hydrophobic poly(ethylene- co -vinyl acetate) and nanoclay-based polymeric adsorbent for effective removal of oils and various organic solvents from contaminated wastewater

Kinetic and Isothermal Investigation on the Excellent Adsorption Removal of Dibenzothiophene from Model Fuel over MnO/Activated Carbon Composite

Melamine-based hyper-cross-linked resin for efficient removal of total petroleum hydrocarbons (C10–C32) from aqueous solutions

Synthesis, Characterization and Performance Evaluation of Pure Silica MCM-41 for Effective Removal of Dibenzothiophene from Petroleum Distillate

Utilization of Iron Oxide Nanoparticles (Hematite) as Adsorbent for Removal of Organic Pollutants in Refinery Wastewater

Experimental evaluation of Farashband gas refinery wastewater treatment through activated carbon and natural zeolite adsorption process

Adsorption-Enhanced Ceramic Membrane Filtration Using Fenton Oxidation for Advanced Treatment of Refinery Wastewater: Treatment Efficiency and Membrane-Fouling Control

In-Situ Decontamination of Heavy Metal Containing Wastewater from Oil Refineries into Catalyst for Polycyclic Aromatic Hydrocarbons Hydrogenation Coupled with Water-Gas Shift Reaction

Adsorption of pyridine from aqueous solutions onto polyaluminium chloride and anionic polyacrylamide water treatment residuals

Exploring nature's filters: Peat-mineral mix for low and high-strength oilfield produced water reclamation

Preparation, characterization and evaluation of nano manganese dioxide coated on alumina as a new adsorbent for the effective removal of phenol from aqueous samples

Optimization of the adsorption of total organic carbon from produced water using functionalized multi-walled carbon nanotubes

Fabrication of carboxylic functionalized poly(methacrylic acid 2-(tert-butylamino)ethyl ester)-coated mesoporous silica nanoparticles and their application for removing ionic dyes from polluted water