Abstract:Chromium oxide (Cr2O3) has wide application in various industries. Its traditional production process, uses sodium carbonate (Na2CO3), which is converted into cheaper byproducts, including sodium sulfate (Na2SO4) and sodium bisulfate (NaHSO4). These byproducts contain hexavalent chromium (Cr(VI)), which can lead to serious environmental pollution. In this work, a cleaner production process for Cr2O3 through the hydrothermal reduction of a sodium chromate (Na2CrO4) aqueous solution with hydrogen (H2) was studied. Nearly single-phase chromium oxide hydroxide (CrOOH) formed as a solid product after the hydrothermal reduction. Then, Cr2O3 was obtained by the thermal decomposition of CrOOH. The advantages of the new process are remarkable. First, the raw material, the Na2CrO4 aqueous solution, was the direct intermediate product in the pressure oxidative leaching of chromite ore with sodium hydroxide (NaOH). Second, the reduction efficiency of Cr(VI) increased up to 97.6%, and the total yield of chromium from Na2CrO4 to Cr2O3 was as high as 94.2%. Finally, 96.6% of sodium could be converted into NaOH, so the aqueous solution in the hydrothermal hydrogen reduction process could be recycled as the leaching agent for the pressure oxidative leaching process of chromite ore. Consequently, a complete cleaner and shorter preparation route from chromite ore to Cr2O3 was achieved by integrating three processes: the pressure oxidative leaching of chromite ore, the hydrothermal reduction of the Na2CrO4 aqueous solution, and the thermal decomposition of CrOOH. The new method achieves the high-efficiency use of chromium resources, cyclic utilization of material, and extremely low environmental pollution of Cr(VI), and well exemplifies the principle of the 3Rs (Reduce, Recycle, Reuse).

Preparation of chemical manganese dioxide from low-grade rhodochrosite ore

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Preparation of Mn Acid Lithium with Spherized Chemical Mn Dioxide

Preparation of Chemical Manganese Dioxide by Dilute Sulphuric Acid Pickling of Mn3O4 and Its Application to the Synthesis of LiMn2O4

Removal and Resource Utilization of High Concentration Flue Gas Sulfur Dioxide Using Manganese Carbonate Ore

Reduction of Low-Grade Manganese Oxide Ore by Biomass Roasting

Novel Process of Reduction Roasting Manganese Ore with Sulfur Waste and Extraction of Mn by Acid Leaching

A Novel Circulation Process to Effectively Produce Electrolytic Manganese Metal (EMM) with Low-Grade Manganese Oxide Ores and High-Sulfur Manganese Ores

An Environmentally Friendly Approach for the Extraction and Recovery of Mn from Pyrolusite by Ammonium Sulfate Roasting‐water Leaching and Ammonium Carbonate Precipitation

The Formation of Manganous Dithionate in the Manganese Oxide Flue Gas Desulfurization

Mechanisms of dry flue-gas desulfurization using natural manganese oxide ores

Efficient Extraction of Manganese from Low-Grade Pyrolusite by a Sawdust Pyrolysis Reduction Roasting-Acid Leaching Process

Novel Understanding of Simultaneous Extraction of Vanadium and Manganese from Vanadium Slag and Low-Grade Pyrolusite Based on Selective Oxidation–Reduction Roasting

Synthesis of Nanocrystalline Cryptomelane from Reduction-Ammonia Leaching Residue of Ocean Manganese Nodules

Preparation of chromium oxide by hydrothermal reduction of sodium chromate aqueous solution with hydrogen and application to chromite ore processing

Enhancement effects of distiller's dried grains as reducing agents on the kinetics and leaching of pyrolusite from manganese ore

Microwave efficient extraction of manganese from low-grade pyrolusite by pyrite reduction acid leaching process

Laboratory procedure and pilot-plant scale production of industrial manganese sulfate by wet-method reducing technique

Study in Reduction-Roast Leaching Manganese from Low-Grade Manganese Dioxide Ores Using Cornstalk As Reductant

In-process control of manganese dithionate in the manganese ore-based wet flue gas desulfurization coupled with efficient manganese leaching

Endowing Manganese Oxide with Fast Adsorption Ability Through Controlling the Manganese Carbonate Precursor Assembled in Ionic Liquid.