Failure mode and hot ductility of Ti-bearing steel in the brittle zone

Ya-Nan Zeng,Yan-Hui Sun,Kai-Ke Cai,Zhi-Fei Ma,Xi-Ai

DOI: https://doi.org/10.1051/metal/2013074

2013-01-01

Revue de Métallurgie

Abstract:The hot ductility of Ti-bearing steel was studied by theoretical calculation and a thermal simulation experiment. Meanwhile, microsegregation and precipitates were analyzed. The results showed that the S, P and O elements were enriched at the grain boundaries, while the hot ductility was deteriorated by inclusions of (Fe, Mn, Si, Al)(S,O) in the interdendritic region. At a temperature of 1300 °C, large TiN particles have little effect on the hot ductility. In the temperature range from 1000 °C to 900 °C, the Reduction of Area (R.A) declined rapidly from 81.77% to 31.77%, with the size of particles decreasing from 5 to 20 nm and quantity increasing from 1.2 inds/μm2 to 354 inds/μm2, respectively. In the temperature range from 900 °C to 850 °C, R.A decreased from 31.77% to 30.12% with the ferric films gradually thickening. The critical stress, 63.58 MPa, was equal to tensile strength at 912 °C. Intergranular fracture occurred easily with higher critical stress below 912 °C.

English Else