Abstract:Traffic noise is a major problem in all large cities. The surface acoustical characteristics (e.g. referred to roads, pedestrian traffic areas, building façades, building surfaces, in general) affect the noise propagation in the urban environment. Through a better outdoor design and management (e.g. by means of green areas, porous asphalt, speed control), or building refurbishment actions (acoustic plaster, absorbing shading devices), the increasing of surface absorption could be useful to mitigate noise environmental pollution, and therefore to reduce the sound levels in the proximity of the building façades for their entire height. The reduction of the noise levels outside the buildings would determine lower indoor noise levels, and therefore a better situation, without direct actions on the building walls. Through a series of noise propagation calculations in urban environments, by means of a three-dimensional simulation model, the influence of some configurations and the potential impact of some intervention solutions are quantified. In the first stage of the research, the analysis of a simplified model is conducted, to evaluate the influence of noise on the building façades, based on a simplified geometry of the urban environment and of the surface acoustic features. The same analysis is validated by means of a more detailed model, corresponding to the configuration of an existing built area, to verify if the analyses performed by means of the simplified model can be extended to more complex layouts. Successively, calculations are developed to quantify the noise levels that occur with different acoustic (absorption of façades, soil, asphalt, or green elements) and geometric (road width, buildings height, presence of balconies, etc.) characteristics to show the potential reduction given by some interventions. Solutions that can lead to a more significant reduction of the noise in correspondence of the façades are then summarized. The simplified geometrical model appears to be suitable for preliminary investigations as the maximum error found for narrower roads is equal to 17%.

Absorption characteristics of porous media: A model for traffic‐noise reducing asphalt

A New Eco-Friendly Porous Asphalt Mixture Modified By Crumb Rubber And Basalt Fiber

Micro-structural analysis of noise reduction mechanism of porous asphalt mixture based on FEM

Two-Layer Porous Asphalt: Main Properties to Decrease the Noise Emissions

Study on the Influential Factors of Noise Characteristics in Dense-Graded Asphalt Mixtures and Field Asphalt Pavements

Laboratory and field evaluation of noise characteristics of porous asphalt pavement

Study on Sound Absorption Characteristic of Porous Asphalt Mixture Based on Macroscale and Mesoscale Analysis

Noise Reduction Characteristics of Macroporous Asphalt Pavement Based on A Weighted Sound Pressure Level Sensor

Effects of asphalt pavement characteristics on traffic noise reduction in different frequencies

Design method of asphalt mixture with balanced noise reduction and mechanical properties

Individual Acoustic Models of Asphalt Surface Mixes at Various Frequencies

Investigation of Acoustic Properties of Poroelastic Asphalt Mixtures in Laboratory and Field Conditions

Noise Performance of Drainage Asphalt Pavement

The Production of Porous Asphalt Mixtures with Damping Noise Reduction and Self-Healing Properties through the Addition of Rubber Granules and Steel Wool Fibers

Investigation on an Absorbing Layer Suitable for a Noise-Reducing Two-Layer Pavement

A simplified model to evaluate noise reduction interventions in the urban environment

Effect of Crumb Rubber Particles on Antisliding and Noise-Reduction Performance of Asphalt Pavement

Investigation of Microstructure Characteristics of Porous Asphalt with Relevance to Acoustic Pavement Performance

Effect of Pore Characteristics on Sound Absorption Ability of Permeable Pavement Materials

Research and application of combined noise reduction method by using noise reducing pavement and noise barrier

Noise Reduction Interventions in the Urban Environment as a form of Control of Indoor Noise Levels